New
#11
This is the one I get during using the recovery disc
This is the one I get during using the recovery disc
This is the error I get when I use the recovery
The OS disc but if you prefer follow Pauly advice. This will give you the best install of Windows 7 but you specifically asked for an install back to the factory condition. I still don't see how Windows 8 got into the equasion though???
Hi pals thanks for your help what I did was took the laptop to nearby HP service centre and they installed a firmware which updated my bios and MB settings now the recovery is working
And now the recovery runs fine but at the end it says restoration incomplete and comes with a log....
--------------------------------------------------
[21:58:35.59] Entering Checking OS Edition...
----------------------------------------
[21:58:35.59] Check RStone.ini file to determine the requried edition.
[21:58:35.60] Exiting Checking OS Edition...
--------------------------------------------------
--------------------------------------------------
[21:58:35.62] Check if Upgrading Win 7 is required.
----------------------------------------
[21:58:35.62] Current Edition is [HomeBasic]...
[21:58:35.62] Required [Starter]. Don't need to upgrade...
[21:58:35.62] Required [Starter] ...
[21:58:38.80] Required [Starter] Edition. But, OS is not [Starter]...
[21:58:38.80] Upgrading OS edition might have some problem...
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7601.17514
Current edition is:
Current Edition : HomeBasic
The operation completed successfully.
[21:59:03.26] ------------------------------------------------------------------------------------------
...
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[21:59:03.26] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
...
[21:59:03.26] ------------------------------------------------------------------------------------------
[21:58:02.86] Start BBOffline.cmd...
UPDrv=[C:]
[21:58:02.86] Set UIA Error Code to 951
[21:58:03.03] WinPE is 32bit.
[21:58:03.03] Starts [FixUps].
[21:58:03.03] ---------------------------------------------------------------------
[21:58:03.03] FixUps.cmd...
[21:58:03.03] create overall progress info...
[21:58:03.50] FixUps.cmd completed...
[21:58:03.50] ---------------------------------------------------------------------
[21:58:03.50] Starts [Tweaks for SSRD].
[21:58:03.52] ---------------------------------------------------------------------
[21:58:03.52] SSRD Tweaks to change user default locale...
[21:58:03.52] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[21:58:03.59] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[21:58:08.60] ---------------------------------------------------------------------
[21:58:08.60] Launch PININST.exe for Offline ...
[21:58:14.86] Starts [Sleep 10 sec].
[21:58:24.89] Starts [Create RStoneFUpdate.INI].
[21:58:30.77] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 6E78-420B
Directory of C:\system.sav\bbv
09/02/2011 09:58 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 29,922,541,568 bytes free
[21:58:30.82] Brand detection.
[21:58:31.31] ---------------------------------------------------------------------
[21:58:52.51] Start SysID Check...
[21:58:52.78] Start Option Code Checks...
SKU_DEF_COUNTRY=[244]
SKU_DEF_SYS_LOC=[en-US]
------------------------------
Reset country in administrator...
------------------------------
------------------------------
Reset country in Default user...
------------------------------
------------------------------
Reset System localed
------------------------------
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7601.17514
Reporting offline international settings.
Default system UI language : en-US
System locale : en-US
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : United States (GEOID = 244)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
------------------------------
Updated System Locale info..
------------------------------
[21:59:00.31] Start PIN Tweaks...
[21:59:00.33] ---------------------------------------------------------------------
[21:59:00.33] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[21:59:00.33] ----------------------------------------
[21:59:00.33] Tweaks for OOBE's Unattend.xml
[21:59:00.33] to pick up the proper file...
[21:59:00.33] ----------------------------------------
[21:59:00.33] rename unattend.org to unattend.or_
[21:59:00.36] ----------------------------------------
[21:59:00.36] without Light Sensor..
[21:59:00.36] ----------------------------------------
[21:59:00.36] This is Restored image [RImage.flg]...
[21:59:00.36] ---------------------------------------------------------------------
[21:59:00.38] Start MIR Tweaks...
[21:59:00.38] ---------------------------------------------------------------------
[21:59:00.38] [MIR Tweaks] ...
[21:59:00.39] ---------------------------------------------------------------------
[21:59:00.39] Start Factory Update(s)...
[21:59:00.58] Start QFE Offline installation...
[21:59:03.19] PININST_OFF: PASSED...
[21:59:03.22] Type C:\System.sav\Logs\BBFindEr.log...
[21:59:03.22] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[21:59:03.22] Type C:\System.sav\Logs\BBFindEr.log...
[21:59:03.22] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\BBFIND4QFE.LOG
[21:59:03.22] Check FUList.log if there is duplicate Desc...
No duplication.
[21:59:03.26] No Duplicated Desc is found... PASSED.
[21:59:03.26] There was no Factory Update...
There might be unexpected reboot during Factory Update.
The process will cause CTO panic because the image might not be normal...
[22:03:15.11] ------------------------------------------------------------------------------------------
[22:03:15.11] ------------------------------------------------------------------------------------------
There might be unexpected reboot during Factory Update.
The process will cause CTO panic because the image might not be normal...
[22:04:56.81] ------------------------------------------------------------------------------------------
[22:04:56.81] ------------------------------------------------------------------------------------------
There might be unexpected reboot during Factory Update.
The process will cause CTO panic because the image might not be normal...
[22:26:09.36] ------------------------------------------------------------------------------------------
[22:26:09.36] ------------------------------------------------------------------------------------------
I have an idea on this but you need to wait till someone more experienced than me has a look at this!