Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer turns itself off after being put to sleep

30 Oct 2013   #1
sboast

Windows 7 Home Premium 64bit
 
 
Computer turns itself off after being put to sleep

I normally put my computer asleep overnight. The last few days it has shut itself down and it takes an overly long time to reboot it (upwards of 3-4 minutes). I have attached the zipped folder per site instructions. Thanks so much for your help.

Computer: HP TouchSmart 610-1150y
OS: Windows 7 Home Premium

Steve




Attached Files
File Type: zip SF_30-10-2013.zip (2.42 MB, 4 views)
My System SpecsSystem Spec
.
30 Oct 2013   #2
richnrockville

Windows 7 Pro x64 SP1
 
 

Sboast, welcome to the windows 7 forum.

FWIW: I don't understand why sleep is used, I have never used it and always get rid of the hyberfil

Rich

PS: but then I am just an old fart that can wait for my machine to come up in the morning..
My System SpecsSystem Spec
01 Nov 2013   #3
sboast

Windows 7 Home Premium 64bit
 
 

Thanks for the thoughts. My computer is still turning itself off without permission!

Steve
My System SpecsSystem Spec
.

01 Nov 2013   #4
YoYo155

Windows 10
 
 

Hi sboast .

What you are experiencing are bug checks which are consistent with what you're describing.
The bug checks are all 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-versa. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.

Code:
BugCheck 9F, {3, fffffa8005ea7060, fffff80000b9c3d8, fffffa800cbace10}

*** WARNING: Unable to verify timestamp for netr28x.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28x.sys
Probably caused by : netr28x.sys
Code:
!irp fffffa800cbace10

     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0  0 fffffa800888b050 00000000 00000000-00000000    
           \Driver\netr28x
            Args: 00015400 00000000 00000005 00000003
 [ 16, 2]   0 e1 fffffa80088ce040 00000000 fffff8000370b200-fffffa800cc9f220 Success Error Cancel pending
           \Driver\vwifibus    nt!PopSystemIrpCompletion
            Args: 00015400 00000000 00000005 00000003
Code:
!DevExt fffffa8005ea71b0

  Device State = PciStarted

  Vendor ID 1814, Device ID 5392
  Subsystem Vendor ID 1814, Subsystem ID F053
 
 Header Type 0, Class Base/Sub 02/80  (Network Controller/'Other')

  Express capabilities: (OS controlled) 
  Logical Device Power State: D0 < Also known as S0 see link above.
  Device Wake Level:          Unspecified
  WaitWakeIrp:                <none>
This due to your Ralink 802.11n Extensible Wireless adapter, the river is not old
which is usually a good thing but I can seem to find where you might have downloaded this version.

How did you obtain it?


Code:
lmvm netr28x
start             end                 module name
fffff880`0603b000 fffff880`06293000   netr28x  T (no symbols)           
    Loaded symbol image file: netr28x.sys
    Image path: netr28x.sys
    Image name: netr28x.sys
    Timestamp:        Fri Apr 12 14:20:28 2013


Interestingly enough a different 0x9F bug check is a very similar story
but this time it's the weird Ethernet connection.

May I ask why are you connected by both wired and wireless?



Code:
BugCheck 9F, {3, fffffa8005eeea10, fffff80000b9c3d8, fffffa800dd6e010}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys
Code:
!irp fffffa800dd6e010


Args: 00000000 00000000 00000000 00000000
>[ 16, 3]   0 e1 fffffa800880f050 00000000 fffff800036c8200-fffffa800cd31500 Success Error Cancel pending
           \Driver\RTL8167    nt!PopSystemIrpCompletion
Code:
!DevExt fffffa8005eeeb60

  Device State = PciStarted
  Vendor ID 10ec (REALTEK SEMICONDUCTOR CO., LTD.)  Device ID 8168
  Subsystem Vendor ID 103c (HEWLETT PACKARD)  Subsystem ID 2ABB
 
 Header Type 0, Class Base/Sub 02/00  (Network Controller/Ethernet)

  Logical Device Power State: D0
  Device Wake Level:          D3
  WaitWakeIrp:                <none>
Here as well the driver is not terribly outdated.

Code:
lmvm Rt64win7
start             end                 module name
fffff880`05200000 fffff880`052d2000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Wed Apr 10 06:00:34 2013

Try to disable each one of the connections separately then both
and see if it bug checks again when you're putting the PC to sleep.

Also the System Event Log is filled with the following:
Code:
Event[34953]:
  Log Name: System
  Source: Disk
  Date: 2013-06-15T03:00:22.669
  Event ID: 11
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Beth-HP
  Description: 
The driver detected a controller error on \Device\Harddisk1\DR1.
Code:
Description    Disk drive
Model    Seagate FreeAgent GoFlex USB Device
Media Type    External hard disk media
Partition    Disk #1, Partition #0
Is there a Paging File set to that drive?
You can check by looking at:
Computer turns itself off after being put to sleep-check-page.png

Which you get to by:

1. Start Menu> Run >type control.exe system
and press the Enter key.
A windows will open and on the Left hand side you will see Advanced system settings, click it.



2.
Next click on the Advanced tab and Settings which correspond to the Performance section;



3. Then the Advanced tab once more and click on the Change button;


Try to disconnect the drive before putting the PC to sleep and see if it still bug checks
or lingers on reboot if it does.


My System SpecsSystem Spec
08 Nov 2013   #5
sboast

Windows 7 Home Premium 64bit
 
 

Thanks so much for your help. I've updated both drivers. As to where I got one of the previous versions, I can't say with any certainty. I have disconnected the hardwired internet connection so now I'm just wireless. I don't remember the circumstances that had me attach the Ethernet cable. Just chalk it up to ignorance.

Everything seems to be working well with no more unexpected shutdowns. I'm going to mark this problem as solved.

Steve
My System SpecsSystem Spec
08 Nov 2013   #6
YoYo155

Windows 10
 
 

Glad to be of service , happy computing!
My System SpecsSystem Spec
Reply

 Computer turns itself off after being put to sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
computer turns itself on when in sleep mode
Hi guys :) Like it says on my title. I put my computer into sleep mode when i am stepping away from my computer. It succesfully goes into sleep mode then i come back and it is on wanting a password. So i sit there wondering if i turned it off or not :sarc: Well i watched a few days...
BSOD Help and Support
My CPU fan turns off after computer wakes from sleep mode
I have a rather confusing problem with my newly built PC. The other day I was using my computer and it randomly shutdown on me without warning. I tried to turn it back on but the fans would only start to spin up but it wouldn't post. I let it sit for an hour and everything seemed fine. Then it...
General Discussion
Computer turns back on 3-5 seconds after pressing sleep
A few days ago, my computer stopped sleeping. When I press the sleep button, my screens will fade to black, and then just turn back on again after a few seconds. I can't think of anything that changed to cause this. I have tried: Sleeping from the command line (same result as button) Closing...
General Discussion
My PC always turns back after put on sleep :(
Hey guys, i really did not know what this would come under, my PC turns its self back on after i put it into Sleep mode I really do not know what could cause this, any ideas?? will appreciate them all thanks, Regards, Andrew
General Discussion
computer turns on for a few seconds then turns off
okay so i am able to turn my computer on for a few seconds but then it automatically shuts itself off after a few seconds but the thing is after letting it sit for a couple seconds it says something about how the clocks on my processor have been overclocked too high and asks if it wants me to...
General Discussion
Computer turns off in sleep
Hi i really want this problem sorted out as it is causing me a lot of trouble, whenever i put the computer onto sleep mode and leave it for a bit, i come back and wake it from sleep ( by pressing the mouse ) and then fans turn on but then it turns off? Please help i tried going into bios but...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App