Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error 0x800750AD when copying a 175gb file to NAS USB external......

06 Nov 2013   #1
2pods

Windows 7 64 Home Premium
 
 
Error 0x800750AD when copying a 175gb file to NAS USB external......

......even though a 163gb file copied fine.

There is enough space, as it's a 2.7TB (i.e. 3TB) drive.
Drive is connected via NAS's USB3 external connection.
File is being moved from NAS's (Netgear ReadyNAS Duo V2) internal drive to it's external USB drive.


My System SpecsSystem Spec
.
07 Nov 2013   #2
jimbo45

Linux CENTOS 7 / various Windows OS'es and servers
 
 

Hi there
just a suggestion - is the 175GB source file on a GPT drive - IMO when messing around with large files I'd make the HDD's all GPT even though this is only mandatory for HDD's > 2TB.

USB3 also on W7 tends to be a bit "flakey" - what you could do is use something like Acronis to "backup" the 175 GB file to the NAS (Acronis can backup in "Data mode") and then restore it to the NAS. Then delete the backup file- OK a bit "Round the houses" but this method should work.

(Note GPT drives won't BOOT though unless you have a UEFI BIOS -- you don't have to enable PROTECTED BOOT though - that's another issue).


Cheers
jimbo
My System SpecsSystem Spec
07 Nov 2013   #3
2pods

Windows 7 64 Home Premium
 
 

Hi Jimbo

Thanks for your help.

The USB3 drive is connected to the NAS as an external. It's formatted NTFS.
The file I'm trying to copy is actually an Acronis backup file, just like the other files that copied successfully.

The file is being copied from the internal drive in the NAS, to the external drive in the NAS, if that makes sense.

I've googled the error message, but with no results.
My System SpecsSystem Spec
.

07 Nov 2013   #4
jimbo45

Linux CENTOS 7 / various Windows OS'es and servers
 
 

Quote   Quote: Originally Posted by 2pods View Post
Hi Jimbo

Thanks for your help.

The USB3 drive is connected to the NAS as an external. It's formatted NTFS.
The file I'm trying to copy is actually an Acronis backup file, just like the other files that copied successfully.

The file is being copied from the internal drive in the NAS, to the external drive in the NAS, if that makes sense.

I've googled the error message, but with no results.
Hi there
are you copying the acronis file with Windows explorer or are you using the acronis RECOVERY / restore function.

The other possible solution is to MOUNT the .tib file and then copy in stages all the files in the .tib file manually (select say 50 GB per selection),

Cheers
jimbo
My System SpecsSystem Spec
07 Nov 2013   #5
2pods

Windows 7 64 Home Premium
 
 

I'm using Windows Explorer.

Do you think there may be a file size limit ?
My System SpecsSystem Spec
07 Nov 2013   #6
jimbo45

Linux CENTOS 7 / various Windows OS'es and servers
 
 

Quote   Quote: Originally Posted by 2pods View Post
I'm using Windows Explorer.

Do you think there may be a file size limit ?
Hi there.

Windows explorer does have problems with Huge files -- not sure what the limit is but it has to create some temporary workspace etc to copy the files -- what tends to happen is that it goes to a hidden area under your user space - then to finalize the copy it moves it from the workspace to the target.

I'd definitely try and open the .tib file and move in chunks or simply restore via acronis from the "external drive" to the NAS.

If you want this as a backup .tib file rather than the individual files - then back it up with acronis directly to the NAS.

Cheers
jimbo
My System SpecsSystem Spec
07 Nov 2013   #7
2pods

Windows 7 64 Home Premium
 
 

Thanks Jimbo.

I think it's safe to say 175gb is, or is over, the limit then.
I'll do the back up again.

So is this error message the rarest in captivity... ?
My System SpecsSystem Spec
Reply

 Error 0x800750AD when copying a 175gb file to NAS USB external......




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
copying to external drive yields strange error
I am copying "stuff" to my new 4TB external HDD = F:\ >> from an internal drive Z:\ Things seem to go OK for a while, then I get this error message ========== Could not find this item This is no longer located in F:\Video. Verify the item's location and try again. ========== If I attempt...
General Discussion
External Hard Disk , file error
Hello all I have a problem with my external Hard Drive. its shows empty but in the properties its actually loaded. What to do. I guess its a shortcut virus but please guide me through this. I NEED THE DATA INSIDE IT!:cry: thankyou
Hardware & Devices
Copying data to External hard drive shows error
I have external USB hard drive 'Seagate 500 Gb' When I transfer data (say Video file) from my Laptop to External Hard drive, it starts coping but it stucks and cannot finish coping. Check out the attachment for the detail of the error while coping. Thanx.
Hardware & Devices
Error Copying Large file
Hello, i hope i could a help for this problem. I just bought a new laptop last week, Acer aspire 4740, intel core i3 processor with a Windows 7 home premium software installed. The problem i am facing is every time i will be copying large file from my external hard drive to the laptop it...
BSOD Help and Support
Windows 7 7057 x64 installation file copying error.
Hi guys I'm facing some trouble installing windows 7 x64 build 7057 When i click "install now" button after booting from the DVD-Rom. I get an error at times stating that i need DVD/CD-Rom Device Drivers and it does not detect the harddrive. However if i wait a little while before clicking...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App