Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: my computer goes straight to startup repair

27 Nov 2013   #1
cdershem

windows 7
 
 
my computer goes straight to startup repair

When I turn my laptop on it goes straight to startup repair. Then it said startup repair cannot repair this computer automaticly so I send information about this problm and hit finish and when I start it back up it goes straight back to startup repair.


My System SpecsSystem Spec
.
27 Nov 2013   #2
archer

Windows 7 ultimate x64
 
 

Hi, Welcome to Seven forums.

You could try inserting a Windows 7 disc, finding the recovery environment, and opening Command Prompt. Inside command prompt, try chkdsk /r followed by SFC / SCANOW

You might be able to access a command/recovery prompt from the recovery manager, without requiring a disc.

I would say the best bet would be to run System Restore, but the above might work.
My System SpecsSystem Spec
27 Nov 2013   #3
cdershem

windows 7
 
 

I did do a system restore and it didn't work I went all the way back to the 24th and nothing. I do not have a disc.
My System SpecsSystem Spec
.

27 Nov 2013   #4
archer

Windows 7 ultimate x64
 
 

You can burn it from your friend's PC. Here's how you do it.

Click on Start -> All Programs -> Maintenance.

Tip: An alternative is to execute recdisc from the Run box or a Command Prompt window. If you do that, you can skip to Step 3 below.

Click on the Create a System Repair Disc shortcut.

Choose your optical disc drive from the Drive: drop-down box.

Insert a blank disc in your optical drive.

Note: An empty CD should be large enough for a System Repair Disc. I created a Windows 7 System Repair Disc on a new Windows 7 32-bit installation and it was only 145MB. If you only have a blank DVD or BD available, that's okay too of course.

Click the Create disc button.

Windows 7 will now create the System Repair Disc on the blank disc you inserted in the previous step. No special disc burning software is required.

After the System Repair Disc creation is complete, Windows 7 displays a dialog box that you can close by clicking the Close button.

Click the OK button back on the original Create a system repair disc window that's now showing up on your screen.

Label the disc as "Windows 7 System Repair Disc" and keep it someplace safe.
My System SpecsSystem Spec
28 Nov 2013   #5
gregrocker

 

Everything that can be done is here for Troubleshooting Windows 7 Failure to Start including the installer to use for repairs or if necessary a Clean Reinstall - Factory OEM Windows 7 which you should do anyway if you still have the bloated HP factory preinstalled Win7 which is the worst install one can have.

Other disks are provided to test for infection or advanced repairs which might be indicated. You can use the Win7 installer or Repair CD as well to rescue any files by Copy & Paste - in Windows Recovery Console

Some HP's also have a Minimal Recovery option when you boot into HP System Recovery so you could do that in place of the reinstall since it is nearly the same.
My System SpecsSystem Spec
Reply

 my computer goes straight to startup repair




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 Repair Disc: Can skip straight to command prompt?
Not really sure if this is in the right section. Situation: Computer system with faulty HDD, damaged sectors, corrupted data and Windows 7 fails to start up, gets hung up. Windows Error Recovery fails to work (Launch Startup Repair) Non of the safe modes work, load last know configuration has...
General Discussion
Windows goes straight to startup repair
Ok, so I've been working on this guys computer for 2 days now all day. I have read many forums and followed many different things but to no avail. The computer came to me going slow, internet explorer would crash so often, it would redo windows updates on shutdown everytime (so those were not...
BSOD Help and Support
Windows will not start, goes straight to startup repair
I changed explorer.dll in Windows 7. Then explorer wouldn't start when I tried to do so from task manager. So I tried to reboot. After also being unable to make headway in safe mode (using msconfig), as that also requires explorer, I launched startup repair using my windows 7 CD. Then after it said...
General Discussion
Startup Repair - windows cannot repair this computer automatically
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it...
Performance & Maintenance
Startup Repair cannot repair this computer automatically
windows wont boot up i get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically: Problem signature: •Problem Event Name: StartupRepair Offline •Problem Signature 01: 6.1.7600.16385 •Problem Signature 02: 6.1.7600.16385 •Problem Signature 03:...
General Discussion
Startup repair cannot repair this computer
Have been getting this lately , can anybody give me the fix please , went to safe mode and backed up my files i needed ,but the pc will not start up , help me please
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App