Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC /SCANNOW Error and System Image Error

07 Jan 2014   #21
RunOrDie

Windows 7 Ultimate x64
 
 

It seems like it's with Microsoft.NET, which I have tried to repair but unsuccessfully and I even updated this via the Windows Updates..


My System SpecsSystem Spec
.
07 Jan 2014   #22
nommy the first

Microsoft Windows 8.1 64-bit Professional
 
 

Hello RunOrDie,

Correct, the problem lays with Microsoft.NET Framework, which can't be repaired since it claims that the source file is also corrupted.
Code:
2014-01-06 22:08:14, Info                  CSI    000001fb [SR] Cannot repair member file [l:24{12}]"mscorwks.dll" of NetFx-MSCORWKS_DLL, Version = 6.1.7601.18140, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-06 22:08:16, Info                  CSI    000001fd [SR] Cannot repair member file [l:24{12}]"mscorwks.dll" of NetFx-MSCORWKS_DLL, Version = 6.1.7601.18140, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-06 22:08:16, Info                  CSI    000001fe [SR] This component was referenced by [l:154{77}]"Package_1_for_KB2833946~31bf3856ad364e35~amd64~~6.1.1.1.2833946-6_neutral_GDR"
2014-01-06 22:08:16, Info                  CSI    00000201 [SR] Could not reproject corrupted file [ml:520{260},l:102{51}]"\??\C:\Windows\Microsoft.NET\Framework64\v2.0.50727"\[l:24{12}]"mscorwks.dll"; source file in store is also corrupted
I have asked our resident WU (Windows Update) expert to take a look at it, please be patient until they arrive.

In the mean time, please try to repair .NET Framework via both these methods;
  1. Click on the .
  2. Click on Control Panel and then on Uninstall a Program under Programs.
  3. Wait for the list to load, and then right-click on the Microsoft .NET Framework entry.
  4. Click on Uninstall/Change, accept the UAC prompt and click on Repair .NET Framework to its original state.
  5. Follow the on screen instructions and reboot afterwards.
If the repair is unsuccessful, you can try the Microsoft .NET Framework Repair Tool or manually download the failed update from here; KB2833946.


Good luck and keep us posted,
Nommy
My System SpecsSystem Spec
07 Jan 2014   #23
RunOrDie

Windows 7 Ultimate x64
 
 

Thanks so much nommy!

Do you also think this is what is causing the error when I try to back up via a System Image?

Update: The repair was successful when I "Repaired .NET Framework to its original state" via Control Panel.
However, I still get the same error from SFC /SCANNOW.
My System SpecsSystem Spec
.

07 Jan 2014   #24
nommy the first

Microsoft Windows 8.1 64-bit Professional
 
 

Hello RunOrDie,

I myself don't use system imaging so I wouldn't know for sure.
A few questions to shoot down the obvious causes;
Does the device where you are backing the images up to have enough free space?
Are you running any programs whilst creating the image?

You can try the following to rule out any programs that might be conflicting;
  1. Preform a clean boot by following step one from this tutorial.
  2. Without opening any programs, attempt to create a system image within the clean boot.
If correct, the process should work without a hitch. If not, please check your backup media for any flaws (eg not enough free space, test for bad sectors via CHKDSK).

Hmm, if the repair is successful then the error should be gone. Have you rebooted between repairing the issue and rerunning SFC?

If not, please do so and rerun SFC.
If yes, please try to manually redownload KB2833946 and install it via the on screen instructions. Afterwards, reboot and preform another SFC scan.

If that doesn't solve it I am out of suggestions and we can best wait for Noel to check (Noel is the WU expert).


Good luck and keep us posted,
Nommy
My System SpecsSystem Spec
07 Jan 2014   #25
RunOrDie

Windows 7 Ultimate x64
 
 

Hi Nommy,

With regards to my System Image, it has always worked flawlessly before all of this.
I have already ran CHKDSK yesterday and it replaced many bad sectors. Do I need to run it again?

I will update with regards to the SFC /SCANNOW issue.
Update: I have Repaired my Microsoft .NET again and was wondering why it allowed me to repair it again..It had already repaired it the last time (1 hour ago).

I will download the file and report back.
My System SpecsSystem Spec
07 Jan 2014   #26
nommy the first

Microsoft Windows 8.1 64-bit Professional
 
 

Hello RunOrDie,

No need to run CHKDSK again. Have you also tried the clean boot procedure to rule out interfering programs? And has the device where you are backing the images up to have enough free space?

Also, are you backing your system images up to an external device, on a different partition of the machine you are creating the image on or on the same drive you are creating the image from? If the latter, do note that it's best to create the image on external media, so that if Windows becomes corrupted or messed up in any other way you can still access the image.


Good luck and keep us posted,
Nommy
My System SpecsSystem Spec
07 Jan 2014   #27
RunOrDie

Windows 7 Ultimate x64
 
 

Yep, I have ruled out the interfering programs. And I am backing onto an external hard drive, with enough free space.
So with those options rued out, do you now think both of these issues are related?

With regards to the SFC /SCANNOW, I ran the repair again via Control Panel and from the Windows NET repair, all without luck. Now I will download KB2833946 and try.
My System SpecsSystem Spec
07 Jan 2014   #28
RunOrDie

Windows 7 Ultimate x64
 
 

Now, after downloading KB2833946, it says I already have that installed...so now I guess both of us are stumped.
My System SpecsSystem Spec
07 Jan 2014   #29
nommy the first

Microsoft Windows 8.1 64-bit Professional
 
 

Quote:
Yep, I have ruled out the interfering programs. And I am backing onto an external hard drive, with enough free space.
So with those options rued out, do you now think both of these issues are related?
Third party programs (programs not created by Microsoft) can interfere with the backup process yes.
And if your external hard drive doesn't have enough free space for the image then obviously it wouldn't work either.

I assume that you are using Windows' native system image tool?
Many of us here on the Forums prefer Macrium Reflect over the native tool, as it's much faster and more efficient, you can check the tutorial here if you want.

Oops, that's a flaw on my side
You should first uninstall KB2833649 by following this tutorial. Forgot to mention that, sorry.


Good luck and keep us posted,
Nommy
My System SpecsSystem Spec
07 Jan 2014   #30
RunOrDie

Windows 7 Ultimate x64
 
 

I don't have KD2833649 installed..
I just searched.

Guess we should wait for Noel?
My System SpecsSystem Spec
Reply

 SFC /SCANNOW Error and System Image Error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bad Image Error after System Restore.
While doing maintenance on my computer last night I started a system restore to the latest point I had. Immediately on its reboot I began getting Bad Image Errors. I ran and updated malwarebytes and avast, as well as Cleaner too handle registry errors. I attempted another restore, and that...
Performance & Maintenance
Trying To Create System Image, Getting Error Message
I just re-installed Windows 7 Ultimate 64-bit onto my PC. I've also added a bunch of programs, files, etc. Also, there's a file called Windows.old on my C drive. Total size of my C drive is 115GB. I'm now trying to create a System Image to a brand new 2TB external hard drive. I keep getting this...
Backup and Restore
Creating System Image, 0x80780119 error
Hi, I've recently reformatted my computer and I would like to make a backup drive this time around. However when I try and use the windows backup and restore it's always saying I don't have enough space. My understanding is that the problem is from my D: SYSTEM_DRV (120mb free, 1.17gb) not being...
Backup and Restore
System Image File error
Ok, this is really gonna sound very very complicated. But I will explain to you one by one. I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because...
Backup and Restore
Backing up system image, error 0x81000037
I've just bought a new laptop with Windows 7 home premium installed and I tried to backup a system image to a brand new portable hard drive. However, whenever I try to backup, the backup fails and says error 0x81000037. I looked online and some people mentioned performing a full scan on the...
Backup and Restore
System Image Recovery Error.
Hey guys, just wondered if someone could help me with this? I moved around some of my partitions after creating a system image. When I tried to do the restore to my old layout I got this error message: I have to say I never used to get this error before when I moved my partitions...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App