Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC /SCANNOW Error and System Image Error

07 Jan 2014   #31
nommy the first

Microsoft Windows 8.1 64-bit Professional
 
 

Hmm, that's weird. It would be best to wait for Noel now yes. He knows a lot more about this than anyone else on the Forum and with his help your issue will be gone in no time
Do note that Noel lives in the UK where it is evening now, so he might not reply until tomorrow. Please be patient until he arrives.


Good luck and keep us posted,
Nommy


My System SpecsSystem Spec
.
07 Jan 2014   #32
RunOrDie

Windows 7 Ultimate x64
 
 

Thank you so much for everything thus far Nommy! Truly appreciate it! I will now wait for Neol and will continue to keep you updated even with Noel's help!
My System SpecsSystem Spec
07 Jan 2014   #33
nommy the first

Microsoft Windows 8.1 64-bit Professional
 
 

You're welcome, I'm glad I could be of assistance


Nommy
My System SpecsSystem Spec
.

08 Jan 2014   #34
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Yep - the affected file is part of the base windows install of .NET3.5 so any problems are likely to cause updates to throw a fit

Please run a CheckSUR scan so we can see if there's anything else that needs looking at.


Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.
My System SpecsSystem Spec
08 Jan 2014   #35
RunOrDie

Windows 7 Ultimate x64
 
 

Hi Noel! Thanks so much for helping!

From your link, I was directed to System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821).

It doesn't specify that this is the CheckSUR Tool. Furthermore, this download is 436MB. Is this correct?

UPDATE: I installed this and from reviewing the .log file, there are "no errors detected"
My System SpecsSystem Spec
08 Jan 2014   #36
RunOrDie

Windows 7 Ultimate x64
 
 

Attached is my CheckSUR log as requested. As you can see, no further errors are detected.

CheckSUR.log

But after running sfc /scannow, the corrupt files remain.


My System SpecsSystem Spec
09 Jan 2014   #37
RunOrDie

Windows 7 Ultimate x64
 
 

After running another CHKDSK scanner, I restarted my laptop and ran SFC /SCANNOW. This time, there was no errors found!

BUT, my issue regarding System Image and System Restore points still remain.

Whenever I back up my laptop via a System Image, or try to create a Restore Point, I get: "The restore point could not be created for the following reason: The specified object was not found. (0x80042308) Please try again."

There is no Restore Points even though I set it to create Restore Points with up to 10GB of HD space. Also, when I updated my Windows via Windows Update, there should be an automatic Restore Point, but again, none was created..

I get - "The module "swprv.dll" was loaded but the call to DllRegisterServer failed with error code 0x80070715."

- "The module "eventcls.dll" was loaded but the call to DllRegisterServer failed with error code 0x80070715."
- "The module "vssui.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files."

When I followed this thread: http://www.justanswer.com/computer/3...windows-7.html
My System SpecsSystem Spec
10 Jan 2014   #38
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please run another SFC /SCANNOW, and post the new CBS.log - then we'll get to work on the corrections necessary
My System SpecsSystem Spec
10 Jan 2014   #39
nommy the first

Microsoft Windows 8.1 64-bit Professional
 
 

Quote:
There is no Restore Points even though I set it to create Restore Points with up to 10GB of HD space. Also, when I updated my Windows via Windows Update, there should be an automatic Restore Point, but again, none was created..
Let's create one then
  1. Click on the .
  2. Right-Click on My Computer and then click on Properties. A new window will open.
  3. Click on System Protection. A new window will open.
  4. Click on the fourth tab, named System Protection.
    Under the Protection Settings there are listed several drives.
    Repeat the following steps separately for every drive listed there that has protection On.
    • Click on the first drive.
    • Click on Configure at the bottom of the page. A new window will open.
    • Click on Delete at the bottom of the page. A message will open to inform you that all restore points were deleted.
    • Click Ok to close this window.
    • Now click on Create with the same drive selected.
    • Name your restore point so you can recognize it (for example; January 10th ).
    • A new window will pop up to inform you that a new restore point was created. Click on OK.
    • Repeat these steps for every drive that has the word on next to it. If there is only one drive listed there, continue to step 5.
  5. Close all open windows and restart your computer.
This procedure will clear all old restore points and create a new one.

Quote:
BUT, my issue regarding System Image still remain.

Whenever I back up my laptop via a System Image, or try to create a Restore Point, I get: "The restore point could not be created for the following reason: The specified object was not found. (0x80042308) Please try again."
I have told you everything on this topic in my previous posts. If that did not fix it and if Noel can't fix it, I would advice you to create a new thread (After solving the SFC problem!) in the Backup and Restore subforum.


Good luck and keep us posted,
Nommy
My System SpecsSystem Spec
10 Jan 2014   #40
RunOrDie

Windows 7 Ultimate x64
 
 

Great! Very excited to get this issue solved. But, there are no errors any more with regards to the SFC scan.

The only problem I have is Backup and System Image issue I have been talking about.

And now, my FN keys do not work (volume, brightness etc.) and my Synaptics touchpad does not work anymore...I did go into msconfig..

sfcdetails.txt


My System SpecsSystem Spec
Reply

 SFC /SCANNOW Error and System Image Error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bad Image Error after System Restore.
While doing maintenance on my computer last night I started a system restore to the latest point I had. Immediately on its reboot I began getting Bad Image Errors. I ran and updated malwarebytes and avast, as well as Cleaner too handle registry errors. I attempted another restore, and that...
Performance & Maintenance
Trying To Create System Image, Getting Error Message
I just re-installed Windows 7 Ultimate 64-bit onto my PC. I've also added a bunch of programs, files, etc. Also, there's a file called Windows.old on my C drive. Total size of my C drive is 115GB. I'm now trying to create a System Image to a brand new 2TB external hard drive. I keep getting this...
Backup and Restore
Creating System Image, 0x80780119 error
Hi, I've recently reformatted my computer and I would like to make a backup drive this time around. However when I try and use the windows backup and restore it's always saying I don't have enough space. My understanding is that the problem is from my D: SYSTEM_DRV (120mb free, 1.17gb) not being...
Backup and Restore
System Image File error
Ok, this is really gonna sound very very complicated. But I will explain to you one by one. I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because...
Backup and Restore
Backing up system image, error 0x81000037
I've just bought a new laptop with Windows 7 home premium installed and I tried to backup a system image to a brand new portable hard drive. However, whenever I try to backup, the backup fails and says error 0x81000037. I looked online and some people mentioned performing a full scan on the...
Backup and Restore
System Image Recovery Error.
Hey guys, just wondered if someone could help me with this? I moved around some of my partitions after creating a system image. When I tried to do the restore to my old layout I got this error message: I have to say I never used to get this error before when I moved my partitions...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App