Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Please help anyone!! Urgent!!

12 Mar 2014   #11
Bradley74

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by gregrocker View Post
What happens if you run only the 2 Kingston sticks?

This tutorial will show you how to test all of your sticks, together and then individually, to determine if any are bad. It will also show you how to eliminate slots as the cause of the problem. RAM - Test with Memtest86+

Keep in mind Kingston has the best tech support in the business and will replace any stick that they help you test which proves bad, even if you didn't buy it from them. I always get a problem solved when I involve them.
The thing that I can't figure out is, before removing and changing them into different slots everything were smooth. But right after changing them into different slots, you can feel and tell the difference, it lags more and slows down.

I mean I can't see how this could possibly occurred? Why would it be slowing down and lag? That what I wana know? Nothing else is bad, everything is the same except system lags and slowing down.

By the way, I already done the Memtests, no errors found.

What might be other causes?


My System SpecsSystem Spec
.
12 Mar 2014   #12
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Did you confirm they are running in dual channel ?
My System SpecsSystem Spec
12 Mar 2014   #13
Bradley74

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by Bernardus View Post
Why not try with just a single memorystrip?
You may select who causes de delay.

The best thing to do is tot run a memorytest from DOS.
There are even from Aida or Everest small routines which you can load from a CD.
This eliminates Windows doubts.

Why would there be any causes of delays if we only took them out and replace them into different slots??

Does yours work like that? have you actually try to replace yours into different slots and see if theres any difference it makes?

If yours doesn't happen to lag or slows down, then I think mine has got a problem. I can only guess but again I could be wrong. Correct me if I am wrong!!
My System SpecsSystem Spec
.

12 Mar 2014   #14
Bradley74

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by AddRAM View Post
Did you confirm they are running in dual channel ?
Well, when the pc starts it says dual channel, but I've only used three slots and left one empty, cuz I've only got 6GB (2GB,2GB,2GB) in total. if I got 8GB I will have them all in four slots.

Hope this answered your question.
My System SpecsSystem Spec
12 Mar 2014   #15
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

No it doesn`t, did you open CPU-Z and see ?
My System SpecsSystem Spec
12 Mar 2014   #16
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

When I make hardware changes I always go into BIOS and check settings.
Sometimes a BIOS setting gets changed and needs to be reset.
Home-build/Custom-build PCs usually have more BIOS settings options than "OEM Pre-build" PCs.
My System SpecsSystem Spec
12 Mar 2014   #17
Bernardus

Microsoft Windows 7 Ultimate 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Bradley74 View Post
Quote   Quote: Originally Posted by AddRAM View Post
Did you confirm they are running in dual channel ?
Well, when the pc starts it says dual channel, but I've only used three slots and left one empty, cuz I've only got 6GB (2GB,2GB,2GB) in total. if I got 8GB I will have them all in four slots.

Hope this answered your question.
Well I'm not shure but some PC's only accept mem. running in pairs.
On the mem card is the ID of the type of Mem.

I cam across Pc's who slows down with more memory running in half speed mode.
My System SpecsSystem Spec
12 Mar 2014   #18
Bradley74

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by AddRAM View Post
No it doesn`t, did you open CPU-Z and see ?
Yes I did, and what am I supposed to do then after viewing CPU-Z??

I am still wondering why would changing slots making the system lags and slowing down?
I am thinking might be something wrong with the regedit!! Not sure.

That just totally weird. If it doesn't happen to yours that shouldn't happen to anyone elses or else it might.

Would re-install the whole entire OS help this do you think? or restore to an earlier point?
My System SpecsSystem Spec
12 Mar 2014   #19
Bradley74

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by Bernardus View Post
Quote   Quote: Originally Posted by Bradley74 View Post
Quote   Quote: Originally Posted by AddRAM View Post
Did you confirm they are running in dual channel ?
Well, when the pc starts it says dual channel, but I've only used three slots and left one empty, cuz I've only got 6GB (2GB,2GB,2GB) in total. if I got 8GB I will have them all in four slots.

Hope this answered your question.
Well I'm not shure but some PC's only accept mem. running in pairs.
On the mem card is the ID of the type of Mem.

I cam across Pc's who slows down with more memory running in half speed mode.
So what after all, do I consider restore to an earlier point or reinstalling the whole OS again??

This problem doesn't seem to go away or any further, and now makes me wonder if the HDD is playing the tricks rather than memories. But I still strongly assume its the memory not the HDD.

I am doing defragment now see if this works.

Any other ideas might help to get through this matter? So far the system still lags and slowing as it is!!
My System SpecsSystem Spec
12 Mar 2014   #20
Bradley74

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by DavidW7ncus View Post
When I make hardware changes I always go into BIOS and check settings.
Sometimes a BIOS setting gets changed and needs to be reset.
Home-build/Custom-build PCs usually have more BIOS settings options than "OEM Pre-build" PCs.

I do go into the BIOS checked all the settings right after I replace the memories, I do just like you did there always good to check before carry on etc.

Does yours happen like that lags and slowing down, if you change your memories into different slots or swap them around from one and another?

The problem still remains!! Even I replace them back into their original place, it still lags and slows down the system.
My System SpecsSystem Spec
Reply

 Please help anyone!! Urgent!!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
[URGENT] BOOT LOADER ERROR [URGENT]
Hi Guys, This is quite a long story, So let me get straight to the point. :) On my Dell Optiplex 360 Computer (Windows 7-Ultimate) I partitioned the hard drive to make space for another windows installation. I then installed Windows Vista Ultimate on it. All of that went successfully but...
Installation & Setup
PLEASE HELP RATHER URGENT :)
i have windows xp currently on one pc it is xp service pack 3 i have got a piad copy of win 7 upgrade for vista , what i am wondering is would this copy of win 7 work on my xp computer if i blew it away and inserted this cd ?? also would i have to upgrade drivers if this would work ...
Installation & Setup
Help please urgent!
Hello I'm new to this forum and I need help please :) My computer specs are: OS: Windows 7 x64 CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz RAM: 4GB DDR2 800MHz GRAPHICS CARD: Asus Geforce GTX260 MOTHERBORAD: Gigabyte EP45-DS3L Everything works perfectly new computer and newly...
BSOD Help and Support
Urgent help plz
Hey guys...plz help me out as soon as possible...i thought of changing the windows startup sound using the tutorial on this site...i renamed imageres.dll to imageresold.dll....it automatically made a file called imageresoriginal.dll also...within the system32 folder...i was continuing with the...
BSOD Help and Support
[URGENT] All System Restore Point Gone!![/URGENT]
The problem occurred when I made a standard user account and through that i redirected to the admin profile under c:/Users/xxxx and i right clicked the profile>properties>security> and i removed the standard account access to that admin folder and got some "Access denied error". After i logged off...
Backup and Restore
I need Urgent Help!
I encrypted in my LG laptop with omnipass some very important word office documents. I broke my LG laptot in 4 pieces. I have this files in my external hard disk,i copy paste them in my desktop i setup omnipass and i try to Decrypt them . But i can't,what im doing wrong? Please help,those files...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App