Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Event log errors on startup

14 Mar 2014   #1
cgoldman

Windows 7 Home Premium SP1 x64
 
 
Event log errors on startup

I have recently taken over a Win7 machine. Through numerous AV tools at it and it is all clean and working. I do however have some errors in the log which arise on each reboot and try as I may I cannot find the cause. system.msc, autoruns, Microsoft help etc have not enabled me to eliminate these. Any advice appreciated. I have seen some similar posts here but their solutions did not work for me.

I have warnings and errors.

error 1. The following boot-start or system-start driver(s) failed to load: luafv


error 2 from Bonjour service 536: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)

I think this may arise because I have network cable to router and wireless, and I have manually disabled the wireless connection.

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&1&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC-&PROD_COMPACT_FLASH&REV_1.00#8&35CCDA1&0&20060413092100000&0#.

there are no stopped services and the device manager shows no issue.


My System SpecsSystem Spec
.
14 Mar 2014   #2
matts6887

Windows 7 ultimate 64-bit
 
 

Try re-enabling the wireless and see what happens. If that does not get rid of the error; i would uninstall and then reinstall the bonjour service.
My System SpecsSystem Spec
15 Mar 2014   #3
cgoldman

Windows 7 Home Premium SP1 x64
 
 
update

I tried that but it does not get better. In any event there are more than one error as reported.



after I re-enable wireless adaptor but still connect only with network I have the following



I just want to get rid of errors.
The 1st DHCP says
"
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x70F1A17DA4CE. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server."

Maybe this is because the wireless connection although enabled is not connected...because I am using cable.

The 2nd Kernal syas
"
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&1&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC-&PROD_COMPACT_FLASH&REV_1.00#8&35CCDA1&0&20060413092100000&0#."

The 3rd is the luafv as reported before
t
he 4th is "
Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."

the 5th is "
WLAN AutoConfig service has successfully stopped."

the 6th is
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
7 user registry handles leaked from \Registry\User\S-1-5-21-2573429720-122581382-2703279237-1005:
Process 156 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2573429720-122581382-2703279237-1005\Software\Policies
Process 156 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2573429720-122581382-2703279237-1005\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 156 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2573429720-122581382-2703279237-1005\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 156 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2573429720-122581382-2703279237-1005\Software
Process 156 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2573429720-122581382-2703279237-1005\Software\Microsoft\Internet Explorer\Main
Process 156 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2573429720-122581382-2703279237-1005\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
Process 156 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2573429720-122581382-2703279237-1005\Software\Microsoft\Internet Explorer\Main\FeatureControl"

the next is dcom "
The server {60A90A2F-858D-42AF-8929-82BE9D99E8A1} did not register with DCOM within the required timeout."




My System SpecsSystem Spec
.

Reply

 Event log errors on startup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Three event errors on bootup: Event ID 7006, 7000 and 7009
Out of the blue I get 3 event errors when I boot up my Home Premium 64 bit. First time in two years. Event ID 7006: The ScRegSetValueExW call failed for FailureActions with the following error: Access is denied. I don't have AVG. I have Agnitum Firewall, Panda Antivirus (Free). Event ID...
General Discussion
Errors in Event Viewer
I usually never bothered with fixing the errors that popup so I'm not super sure how to handle ones I can't find answers to on google. I solved one of the problems but theres 2 more that pop up every boot Log Name: Application Source: Microsoft-Windows-WMI Date: 11/26/2014...
Performance & Maintenance
Event id 35 errors
I've had the CPU (Intel Core 2 Quad Q9550) moved from my previous pc to a new, identical machine. Ever since then, I found the pc in "sleep" mode even though I had disabled it, and I'm getting lots of event id 35 errors. It would seem "energy saving features" for the four processors "are...
Drivers
Event log 3 errors after startup
Hello. I have attached a file of Event log which has 3 errors that happens every time when I start my pc and shows my desktop. Please help. Please do not give option of formating pc. Thank you.
General Discussion
WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)
Hi, I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating" Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words)...
Hardware & Devices
VSS event log errors
Hi A few months back I started to find that my backups using Mirror Folder were not working using the ntfs change journals. Don't know if this is related to problem this morning though. I have just tried to back up some files/folders with another application, Macrium Reflect which is now...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App