ssd boot time slow after adding hdd in optical drive

Page 1 of 2 12 LastLast

  1. Posts : 60
    Windows Ultimate x64
       #1

    ssd boot time slow after adding hdd in optical drive


    Hi



    I installed my SSD in the hdd bay (removed hdd and replaced ssd) and noticed fast boot time and then after adding a 2nd hdd using a caddy and replacing the optical dvd/cd drive ( I broke it ), I noticed a couple seconds slower on boot.


    Computer specs : intel core i5 3230M 6gb ram windows 7 ultimate sony vaio sve 14

    ssd sandisk ultra + 256gb paired with a 5200rpm 750gb in the optical drive
    I set boot order as

    internal Hard Drive
    External Device
    Network

    the last option was optical drive which I didn't set as a boot order.
    It doesn't let me set SSD as boot and HDD as secondary hdd on my BIOS. should I update my bios ?
    Attached Thumbnails Attached Thumbnails ssd boot time slow after adding hdd in optical drive-bootsetup.png  
      My Computer


  2. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
       #2

    Ok Windows OP mate does the BIOS let you set the SSD as first device with the other drives disconnected?
    If so then I would reckon you need to update the BIOS but it is something you must be sure of first as you know updating the BIOS has it's hazards namely it can wreck the BIOS chip.

    So whatever you do be careful in updating it. But first see what just having one drive in does (and in any case you should see in the BIOS all the drives that are hooked up anyway).

    Have a read about the BIOS in this link AMI | American Megatrends Inc. : Glossary

    PS Is this a different machine than the one in your system specs??
      My Computer


  3. Posts : 60
    Windows Ultimate x64
    Thread Starter
       #3

    ICit2lol said:
    Ok Windows OP mate does the BIOS let you set the SSD as first device with the other drives disconnected?
    If so then I would reckon you need to update the BIOS but it is something you must be sure of first as you know updating the BIOS has it's hazards namely it can wreck the BIOS chip.

    So whatever you do be careful in updating it. But first see what just having one drive in does (and in any case you should see in the BIOS all the drives that are hooked up anyway).

    Have a read about the BIOS in this link AMI | American Megatrends Inc. : Glossary

    PS Is this a different machine than the one in your system specs??
    Yes.

    This machine is different than the one in my system specs. No, the BIOS doesn't let me set the SSD as an first device. I removed the 2nd hdd caddy from the optical drive and boot it in bios mode, and no SSD. What you see in the picture is what I can only select. HDD, Optical, Network, external device. As for updating the BIOS, I don't know how to do that. Do I get the bios update directly from the manufacturer website or the bios manufacturer website?

    I checked the support page for my laptop and there is no update for my BIOS. It's a windows 8 pre installed laptop with Windows 7.
      My Computer


  4. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #4

    I assume you have just 2 hard drives: an SSD and an HDD mounted where your optical drive used to be.

    Correct?

    What's supposedly on the HDD?

    What makes you think that "internal hard disk drive" isn't the SSD? I'm just asking. I'm not sure the SSD would be shown as "SSD" on a boot menu.

    Does this machine boot OK if the HDD is disconnected?

    This isn't likely to be something that a BIOS update would fix, so I'd forget about that for the time being.
      My Computer


  5. Posts : 60
    Windows Ultimate x64
    Thread Starter
       #5

    ignatzatsonic said:
    I assume you have just 2 hard drives: an SSD and an HDD mounted where your optical drive used to be.

    Correct?

    What's supposedly on the HDD?

    What makes you think that "internal hard disk drive" isn't the SSD? I'm just asking. I'm not sure the SSD would be shown as "SSD" on a boot menu.

    Does this machine boot OK if the HDD is disconnected?

    This isn't likely to be something that a BIOS update would fix, so I'd forget about that for the time being.
    machine boot ok if hdd is connected ( slightly faster)

    nothing is on the hdd, my data (pics, downloads, documents, etc)

    hdd is the optical so if i were to put the ssd in the optical, and change the boot order to optical first, it would boot.


    theres just a slight delay with the hdd ( about 5 seconds delay ) upon boot
      My Computer

  6.    #6

    When Boot Order Priority chocies are that generic, it means the devices for that type are normally prioritized under another setting - for HD's usually under Advanced settings related to storage.

    But I don't think that would slow it down unless the HD is set first and its pausing to call on it and check if its bootable.

    The only Boot order priority device that really matters is the one that's first in order, unless you intend to have it skip it (like a DVD or flash drive) when not intending to boot that device. I like the HD set first to avoid any possible delay. There should be a way elsewhere to set which HD is being set first. .
      My Computer


  7. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
       #7

    I don't know what the others think but I cannot find any drivers for this laptop from Dell at least. It seems strange to me that the SSD is not recognised and was then thinking maybe it is a problem with the SATA ports?? hence looking for drivers.

    Now am I right in assuming the spinner is recognised only in the optical port or is it recognised in both it and the hard drive bay?

    If it is recognised in both spots then it points the finger at that SSD.
      My Computer


  8. Posts : 60
    Windows Ultimate x64
    Thread Starter
       #8

    ICit2lol said:
    I don't know what the others think but I cannot find any drivers for this laptop from Dell at least. It seems strange to me that the SSD is not recognised and was then thinking maybe it is a problem with the SATA ports?? hence looking for drivers.

    Now am I right in assuming the spinner is recognised only in the optical port or is it recognised in both it and the hard drive bay?

    If it is recognised in both spots then it points the finger at that SSD.
    It's not a Dell Laptop, its a Sony Vaio SVE14A35CXH.

    Honestly, I assumed that the "Internal Hard Drive Disk " is for any hard drive bay whether its a SSD or HDD.

    Maybe the SSD is only recognized in the optical drive and not the hard drive bay? o.o I know that most guides that involve ssd/hdd setups have you put the hdd in the hard drive bay and ssd in the optical. I did the opposite because it makes it easier to remove the hdd if I only use it for storage. I didn't know that the SSD is suppose to be recognized in the BIOS.

    Aptio Setup Utility is the BIOS for my laptop.


    Sony eSupport - SVE14A35CXH - Support
      My Computer

  9.    #9

    Did you read what I wrote ?

    When a boot choice is that generic, there will be another place to set which Hard drive you want Primary - normally under Advanced BIOS options. I've never seen this not be the case.

    Every connected drive is registered somewhere in the BIOS and near there should be the setting to choose which one is Primary. Look for where the SSD is registered.
      My Computer


  10. Posts : 60
    Windows Ultimate x64
    Thread Starter
       #10

    gregrocker said:
    Did you read what I wrote ?

    When a boot choice is that generic, there will be another place to set which Hard drive you want Primary - normally under Advanced BIOS options. I've never seen this not be the case.

    Every connected drive is registered somewhere in the BIOS and near there should be the setting to choose which one is Primary. Look for where the SSD is registered.
    Yes I read your post Gregrocker,

    Under the Advanced BIOS option, it says Intel (R) Visualization Technology Disabled.

    This BIOS doesn't have much options compared to the D620 laptop that I use.

    I'm not sure but what does it mean if you have the option to press F3:Optimized Defaults?

    Under my BIOS, I set the internal Hard Disk Drive as first boot priority since that's where my SSD is located. After adding the HDD, there is a slight delay in boot but not much, by 1-5 seconds.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:25.
Find Us