Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: can't access User Accounts or log into Safe Mode or change anything

13 Jul 2014   #1
davicolb

Windows 7 x64 home
 
 
can't access User Accounts or log into Safe Mode or change anything

I received a message that I had logged into a temporary account and in order to save my work I had to change users.

The problem is: I cannot do ANYTHING. If I log off and try to log on as a different user, the only active icon is my regular account (david) and the ADMIN icon is grayed out. I cannot access User Accounts; I cannot log into Safe Mode; I cannot access msconfig.exe; I cannot do a system restore, I cannot change anything in REGEDIT; I cannot install a program.

For almost anything I try to do, I get a window that says, “Do you want to allow XXXX to make changes to your computer?” and the “YES” button is grayed out.

There are six temporary user accounts. Five are empty, the sixth one appears to be the one I’m logging into. When I log off and try to switch users, the sixth one does not have an icon.

I have a SATA USB drive attached that has some of my programs. Now, when I boot, Windows usually does not recognize it. Sometimes, it does. When it does not, I can access many of the programs on it by going to \users\david\desktop\startup. David is my user name

I downloaded and burned a "Windows 7 Rescue Disk 64 Bit" CD, but it appears to be the same thing as the Windows installation CD. I have not doene anything with it. -- I don’t want to re-install all of the applications (like Office, Firefox, and Thunderbird) on the C:\ drive.

I've downloaded, burned CDs, and looked at 11 "rescue" CDs, but haven't found anything that helped. What else can I do?

Windows 7 x64 Home, 100 gig SSHD with 30 gig free, Intel i-5 2 core 3.3 GHz, 8 gig memory, MalwareBytes AntiMalware shows no problem.


My System SpecsSystem Spec
.
15 Jul 2014   #2
Vuxy

 

Hello Davicolb,

I'm sorry to hear you're experiencing this and let's try to resolve it as soon as possible.

For troubleshooting steps, please follow the instructions listed on this following link:
A temporary profile is loaded after you log on to a Windows Vista-based system

Does the issue then still occur?

Thank you,
Vinny Buxton
My System SpecsSystem Spec
15 Jul 2014   #3
davicolb

Windows 7 x64 home
 
 

Thanks for your reply, Vinny. Re Step 1: In Windows Explorer under C:\ users, there are three accounts: david, public, and temporary. Actually, there are six temporary accounts, but five are empty directories. I muist be booting into the non-empty C:\users\temp.david-DesktopPC.005 account. If I try to switch users by logging off , the log on screen shows “david” and “Administrator”, but the Admin account is grayed out. I cannot do anything by going to Control Panel\User Accounts. Re Step 2: I backed up the C:\users\david directory, just in case, but I don’t think that it will be useful. Re: Step 3. I can access the registry without a password, but I cannot change anything. (But see below) Re: Steps 4 and 5: Just for the record, there are 5 keys under in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList. The first three are “s-a-5-18”, “s-a-5-19”, and “s-a-5-20”. Under “s-5-21…etc...…”, the profile image path is “C:\Users\TEMP.David-DesktopPC.005” where David-DesktopPC is the name of the computer. Under “s-5-21….etc.…bak”, the profile image path is “C:\Users\David”. Should not the two should be the reverse? Perhaps I should change “C:\Users\TEMP.David-DesktopPC.005” to “C:\Users\David” and then delete the bak key? It looks like I CAN delete the bak key, but I have not yet tried to do so it since I am logged on as David, the instruction is to change user before proceeding, and I don’t want to cause a bigger problem. And remember, I cannot change users. Just for the record, the entries in the two keys are the same, except for the profile image paths given above and: 1. The “reference count” in bak is 000 000 000 (0), the original is 000 000 000 (1); 2. The “Run Log On Script” [ 000 000 000 (0) ] is in the bak key but not in the original; 3. The two SIDs are different, of course; and 4. The “State” of the bak is 000 000 000 (32769) and the original is 000 000 000 (18948) The extra zeroes in the keys is my doing so I could count the zeroes. :>) Comment: Hiren’s Boot CD has something called “MiniXP” that can load a stripped down version of XP [ what else would it be? :>) ]. If worse came to worse, I probably could boot with it and modify the registry with it. I haven’t tried it. I don't want to cause more problems.. So -- Should I go ahead and delete the .bak key although I cannot change users? And change the profile image path as mentioned above? Thank you for helping me.
My System SpecsSystem Spec
.

16 Jul 2014   #4
Vuxy

 

Hello Davicolb,

Is your account 'David' an administrator on the system? If not, are you able to make it an administrator.
Change a user's account type - Windows Help

It will be safe to follow the Registry steps listed on the webpage I gave you, as it was written by Microsoft. A good idea would be to back-up your registry though. How to back up and restore the registry in Windows

Thank you,
VinnyBuxton
My System SpecsSystem Spec
Reply

 can't access User Accounts or log into Safe Mode or change anything




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
User profile service failed the log on. Can't access safe mode
Hiya all. Common problem user profile service failed the log on but I can't access safe mode to fix. Wireless and USB cabled keyboards won't go into safe mode by clicking f8. Have tried pressing the shift key during restart. Have tried loading 7 installation disk during start up and will not load...
General Discussion
Can't add, delete or change user accounts
I have been working on a friends computer, trying to clean it up a little. I am logged onto the administrator account that he had set up, but it also shows it as a guest account and I can't do anything with the other accounts. I am trying to delete some of the standard user accounts that he...
General Discussion
Cannot access Safe Mode but can boot in Safe Mode with Networking
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt. Safe Mode with Networking loads normally. Any ideas or advice? The...
BSOD Help and Support
How do i change user accounts outside their domain?
I received my computer recently from someone who registered it on a domain server out of my access. Every time I try to change a setting where I need to give my password, the computer says "there are currently no logon servers available to service the logon request" i also cannot change user...
Network & Sharing
User accounts Administrator change
Okay so this is my problem; About two weeks ago my mother got to keep a laptop from work because she was moving schools and it was "outdated". It was on a school domain so it had her login from the schools. At the login page all i had to do was type "name.name" and the password and that was...
General Discussion
Virtual PC XP Mode - Add Limited User Accounts
How to Add Limited User Accounts to Windows Virtual PC XP Mode This will show how to add a user account with limited rights to Windows Virtual PC XP Mode.Default user account in XP Mode is XPMUser. When adding other user accounts, if you choose account type as Computer Administrator you can use...
Tutorials


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App