Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Resuming system - I have a different problem

03 Sep 2014   #1
qusha

Windows 7 64 bit
 
 
Resuming system - I have a different problem

My Toshiba satellite windows 7 laptop can't resume the system (black screen white text) after it had failed to resume the previous time. Now it has two options, to resume the system and the other one I forgot. The problem is my ENTER key doesn't work..... the enter key didn't function since a year ago, and I did the key mapping which is replacing the enter function to the shift key. but in this black screen it doesn't work, the shift key(enter function) only works after the windows started. normally to resume the system it has countdown until it chooses the option highlighted. But this is when it had failed(no countdown), and I've been asked to resume because it had failed before. It doesn't fixed even after I took out the battery and putting it back again. I can't go to the shop because I'm at college far away from home and shops. I really need my laptop. I'm not knowledgeable about computers and laptops stuff, and the people here can't solve my problem either. Is there any other way to solve my problem?? Please help. Thanks


My System SpecsSystem Spec
.
03 Sep 2014   #2
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Welcome qusha

Can you borrow or buy a full size desktop keyboard to connect to the laptop ? Is there a PS2 keyboard connection or only a USB connection on the side of your laptop ?


Attached Images
Resuming system - I have a different problem-ps2_keyboard-mouse-ports.jpg 
My System SpecsSystem Spec
04 Sep 2014   #3
gregrocker

 

Try tapping the key given on first screen (F1 or F2?) to enter BIOS setup to Reset to Defaults. First take note of the SATA controller setting (should be AHCI) and see that the HD also remains first device to boot.

If this fails try F8 to access System Recovery Options or burn a Win7 disk from Troubleshooting Windows 7 Failure to Boot, boot into System Recovery Options to System Restore to before the issue arose.
My System SpecsSystem Spec
.

08 Sep 2014   #4
qusha

Windows 7 64 bit
 
 

Thanks all i borrowed a keyboard from the faculty
My System SpecsSystem Spec
Reply

 Resuming system - I have a different problem




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Problem resuming from sleep
I just built a new computer recently and everything seems to work fine except for the sleep mode. After it is in sleep mode I will try to resume and the computer will attempt to start up. You can hear the computer starting to work but after 2-3 seconds, everything shuts off. A few seconds later...
Software
BSOD while resuming from sleep, or not resuming from sleep at all
My system was never able to resume from sleep. Tried several things, BIOS settings, settings for power management etc. Thought it could be related to recovery software or other installed drivers etc. But now: I replaced my harddisk with a SSD, did a fresh install of W7 Ultimate 64. Removed all...
BSOD Help and Support
Advanced System Optimizer, System Protector, Start up problem
Hello guys, I have this program in my computer called "Advanced System Optimizer" and it has a program called "System Protector" and I just want to disable it forever or at least not to show at my system start up, every time I turn on my computer it comes up and it is really annoying. There is...
Software
Problem Solved with Windows 7 Crash When Resuming from Sleep
After 9 months of trying to run this down, installing and reinstalling Win7, updating drivers etc. I finally solved a problem I have been having with Windows 7 crashing when resuming from sleep mode. Hopefully this will help others. The problem I had showed in the Event Viewer as a Kernel Power...
BSOD Help and Support
Problem with Word 2003 after system repair and system restore ?
Office Version:Office 2003 Operating System:Windows 7 http://i4.social.answers.microsoft.com/Forums/resources/images/trans.gif?cver=2.13.0068.4 After a number of issues regarding my HP OfficeJet 7410 All-In-One problems (absolutely no help from HP by the way)...I decided to try a "System...
Backup and Restore
Problem With Resuming From Screen Saver
Alright so, in the past few days I have been returning to the computer and turn on the monitor, and I have set the screen saver to nothing but just pure black. And when it comes up, the screen is still completely black except for the taskbar. And the black is in boxes, if I open an application for...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App