Computer randomly freezing, no BSOD

Page 1 of 3 123 LastLast

  1. Posts : 35
    Windows 7 home premium x64
       #1

    Computer randomly freezing, no BSOD


    For the last 6 months or so my computer has been randomly freezing/locking up, no sound, mouse wont work, all screens freeze, only option is to hold down the power button. This has been happening before and after a fresh install which i did around 2 weeks ago. I have not found any pattern besides that it happens once a day or so. It will happen while playing a game, or idle, nothing i have done can repeat it. Ive ran memtest for 13 hours, no errors. ran diagnostics on my cpu, no errors. the fresh install 2 weeks ago. 64 bit windows 7, i5 3570k no oc, 8gb patriot g2 ram, asus p8z77-v lk mobo, radeon r9 270 gpu, ocz vertex 4 boot drive and 1tb wd caviar(blue i believe) storage drive if that helps
      My Computer


  2. Posts : 4,751
    Windows 7 Home Premium 32-Bit - Build 7600 SP1
       #2

    Can you post a Snip of your Disk Management. Disk Management - Post a Screen Capture Image Make sure the columns are expanded so we can read the print.
      My Computer


  3. Posts : 35
    Windows 7 home premium x64
    Thread Starter
       #3

    there you go
    Attached Thumbnails Attached Thumbnails Computer randomly freezing, no BSOD-20140920025932864.png  
      My Computer


  4. Posts : 3
    Windows 7 Ultimate X64
       #4

    i would suggest you to test you RAM sticks for errors or video card, this is my personal oppinion, i had this problem 2 times and my computer were freezing withour any reason.
    My ram memory from 4x1024 sticks 2 had errors, and one i had same problem but my video card was partialy broken.
    Test them both and see where it's from.
      My Computer


  5. Posts : 35
    Windows 7 home premium x64
    Thread Starter
       #5

    well i just got the gpu a little over a week ago, it happened before and after the gpu so its not that. and ive ran a memory test for 13 hours straight and got nothing
      My Computer


  6. Posts : 4,751
    Windows 7 Home Premium 32-Bit - Build 7600 SP1
       #6

    When you did the Fresh Install, you most likely did not unplug the D:. This is why the System, Active is on it instead of the System Reserved on C:. You will need to do a Startup Repair to get you System file on the System Reserved partition. Also your System Reserve should not have a letter. First unplug the D: drive. Then remove the letter F: from the drive like this
    Drive Letter - Add, Change, or Remove in Windows Next you will have to do a Startup Repair like this Startup Repair The Startup Repair will put the System file on the System Reserved partition. When you have done this, with the D: drive still unplugged, boot and it should boot OK. You can then plug back in the D: drive. You will then need to remove the Active from D: Partition - Mark as Inactive Let us know if any problems along the way.
      My Computer


  7. Posts : 35
    Windows 7 home premium x64
    Thread Starter
       #7

    you're correct in that i didnt unplug the d drive, although it did this before i even fresh installed? also should i unplug the d drive before i even remove the letter F: from the drive and leave it unplugged for the whole thing?
      My Computer


  8. Posts : 4,751
    Windows 7 Home Premium 32-Bit - Build 7600 SP1
       #8

    Methods said:
    you're correct in that i didnt unplug the d drive, although it did this before i even fresh installed? also should i unplug the d drive before i even remove the letter F: from the drive and leave it unplugged for the whole thing?
    Yes,unplug the D: drive as the first thing you do. == Check in the Bios just to make sure that the DVD is your first boot and the C: is the second boot. It probably is, but lets make sure. I will stay online a while and maybe we can get your PC corrected sooner
      My Computer


  9. Posts : 35
    Windows 7 home premium x64
    Thread Starter
       #9

    startup repair didnt find/do anything so im not sure if i should move on to making the d partition inactive or w/e
      My Computer


  10. Posts : 4,751
    Windows 7 Home Premium 32-Bit - Build 7600 SP1
       #10

    You can wait to the end to make D: inactive. You are going to need D: plugged in for this. You are going to copy the System file from D: to C: As I said earlier, check to make sure your DVD is the first boot and the C: drive is the second boot in your BIOS. Following this tutorial will copy the System file from D: to C: as it should be. Bootmgr - Move to C:\ with EasyBCD Tells us how things went. == When you get through, the System Reserved should have a System and Active file. == If you haven't looked in Disk Management since you tried the Startup Repair, just look and see if System Reserved has a System file in it now. It just seems like the Startup Repair should have worked.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:36.
Find Us