Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cut Signal After BIOS when Using OCTuner

03 Oct 2014   #1
james rumbles

windows 7 Ultimate 64 bit
 
 
Cut Signal After BIOS when Using OCTuner

Problem:
---------------

4 months ago i had experienced BSOD where playing call of duty ghosts while also moving a large 700Gb of data from SSD to HDD. The screen goes blank and then green then cuts power to the pc and then rebooted into BSOD

Sometimes my mouse & keyboard played up and i couldnt establish a connection via display either vga dvi or hdmi, on board , with graphics card.
resulting in a clean flash of the BIOS to recover a stock BIOS .

I have learned that soon after i would go into OC Tuner and over clock my cpu from 36.0Ghz to 4.1 or 4.40Ghz again and within hours the same shit happens again ultimately making me flash my bios and fustrate me. And ultimately destroying a core in the process, i only have 3 cores showing .

I had my computer for a month on stock default 36.0 Ghz it runned smooth as on highest and algood .i notice transfer speeds were slower than normal for ssd @45mb/sec so i went back into BIOS once more and set it to 38.0 and after just 5 hours yesterday it crashed.cant get it to give me a signal.

Tried searching for the answer via internet but i couldnt find relating stories i dont think. id better leave this one for you professionals.

Do you have any idea what i could do or what more information you need? This is my first Post on a Forum.

Facts:
----------

- Psu switch is on with power and fans, lights, cpu, graphics Card all working.

-only dvi to vga and an hdmi cord/wireless mouse and keyboard/ and power are connected. all usb devices taken out.

- The keyboard&mouse arent detected like last times this happened they showed up with caps light and flashing.
The Adapter is the only usb connected.

-no signal on both my screens; tried with both cords on both Graphics Card and OnBoard...Nothing.

- Seems like i cant see or communicate with the BIOS screen at all with my screen .

-i dont have a beep thingy .well ... not that i know of.

-there is a power button, a restart button and a light button.
When pressing the restart button... wont restart pc as i dont hear fans resetting..
When holding down power button for more than 20seconds ... no power off.
You can only turn off by psu switch.

Specs:
-----------

OS. Windows 7 Ultimate 64Bit
CPU. AMD A85X FM2 A-Series
GPU. AMD RADEON HD7770 1GB GDDR5
MB. ASUS F2 A85-MLE
RAM. KINGSTON 2x 4GB (8GB Total)
PSU. COOLER MASTER EX2TREME 525 WATT

Display 1: viewsonic HDMI LED 1080P .MDL NO : VX2253
Display 2: HP .MDL NO : HP L1706
*Both through GPU

Storage:
--------------

OS. 240GB Crucial M500
Old OS. 2TB WD Black 64MB Cache
1TB WD Blue 64MB Cache
1TB WD Green 32MB Cache

Hope this helps thanks. Need to know ASAP


My System SpecsSystem Spec
.
03 Oct 2014   #2
james rumbles

windows 7 Ultimate 64 bit
 
 

If there is a conponent that needs replacing please select which from my own here: AMD FX-9590, Gigabyte GeForce GTX 770 - System Build - PCPartPicker New Zealand
My System SpecsSystem Spec
03 Oct 2014   #3
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Your Motherboard is just not making at it...Is not a horse power with 3 phases + 2 phases, an ATX 4pin header for powering... and Oc Tuner on such card raise the BCLK/PEG Frequency, and you will turn frying your hardware components.

To make short!
My System SpecsSystem Spec
.

03 Oct 2014   #4
james rumbles

windows 7 Ultimate 64 bit
 
 

Nice pc build bro
What about the motherboard? I know 4.4ghz is to high .settle maybe with intel .
i just wanted to test the shit out of it for gaming on battlefield until i get my gtx 770 oc 4gb windforce.
My System SpecsSystem Spec
03 Oct 2014   #5
james rumbles

windows 7 Ultimate 64 bit
 
 

Is there a way i can reset my computer? Or do i need to take hdds out and start testing parts seprately to find out what isnt functioning and what is .i dont have a spare pc to test them on .
My System SpecsSystem Spec
03 Oct 2014   #6
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by james rumbles View Post
Is there a way i can reset my computer? Or do i need to take hdds out and start testing parts seprately to find out what isnt functioning and what is .i dont have a spare pc to test them on .
Yes, you should reset to default the Bios settings first with all your hardwares connected, restart/stop then unplug the Data HDDs to keep your Operating Sytem only. Test parts .

to enter Bios on Asus Motheboard, it should be DEL key or F2
My System SpecsSystem Spec
03 Oct 2014   #7
james rumbles

windows 7 Ultimate 64 bit
 
 

Keyboard isnt being detected by pc
My System SpecsSystem Spec
03 Oct 2014   #8
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Try another USB2.0 port...Is the keyboard not detected in Bios too?
My System SpecsSystem Spec
03 Oct 2014   #9
james rumbles

windows 7 Ultimate 64 bit
 
 

.[/QUOTE]

Yes, you should reset to default the Bios settings first with all your hardwares connected, restart/stop then unplug the Data HDDs to keep your Operating Sytem only. Test parts .

to enter Bios on Asus Motheboard, it should be DEL key or F2[/QUOTE]

Im just waiting for the keyboard its back at mums . I have wireless keyboard be back in 3-4 hours to let you know what happened.
My System SpecsSystem Spec
03 Oct 2014   #10
james rumbles

windows 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by NoN View Post
Try another USB2.0 port...Is the keyboard not detected in Bios too?
keyboard isnt being detected by bios too. No usb ports recongnise my usb 2.0
keyboard..?
My System SpecsSystem Spec
Reply

 Cut Signal After BIOS when Using OCTuner




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
I can't access BIOS settings because BIOS assumes Windows is resuming
Good evening! A week ago I reinstalled Windows 7 in EFI mode on my laptop, and now I've got this problem: whenever I turn on my computer after a shutdown, the BIOS says "System Resuming" instead of "Press F2 to enter settings". This makes impossible for me to access BIOS settings. Previously, my...
General Discussion
Windows 7 Stuck At BIOS Cannot Enter BIOS or Change Boot Media
My laptop has no problem before. Recently I try to install Windows XP. First attempt fail, so I change SATA at BIOS from AHCI to Compatible, success. However the partition that I want to install*Windows XP to is not available.* So just to test I choose my Windows 7 partition. Since it want to...
General Discussion
Problems with Nvidia gpu post BIOS system BIOS update.
Hello all, this is my first time posting here so please forgive any mistakes/oversights. I've just updated my Samsung laptop's system BIOS via their software update program, and my Nvidia GPU (GT 650m DDR3) no longer seems to work. The Nvidia control panel is still there, and it still gives me...
Graphic Cards
BIOS beep, PC posts, but red LED light on GPU and no monitor signal
A couple of weeks ago the fan on my graphics card stopped working, it was buzzing a lot and periodically slowing down. I bought a new heatsink for the card, an Arctic Cooling Accelero L2. I installed everything on the card correctly and carefully. Now when I put the graphics card back on the mobo,...
Hardware & Devices
GPU Bios showing up before Mobo BIOS (slowing boot up time)
So recently I purchased a Galaxy GTX 460 768MB video card. I was previously using a BFG Tech GTX 275. When I first installed the GPU I was on an ASUS P5B Deluxe WiFI Edition motherboard. I am now on an ASRock P64 Extreme4 motherboard. I mention the old mobo because the problem has been the same...
Graphic Cards
WMC and TV Tuner - No Signal / Too Weak a Signal
I have owned several TV Tuners in the past and this is the first OS that has given me problems. I have a Hauppauge WinTV-HVR-1950 (USB 2.0hs) and cannot get a picture from my Cox Cable Service in Orange County, Southern CA. Installed the 64bit driver from Hauppauge. According to Device...
Media Center


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App