Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Pc stops bit by bit until it needs a restart

13 Oct 2014   #11
gregrocker

 

Edit visual effects as suggested in Bloatware tutorial below.

Try another Display driver from manufacturer for your model.

Try another video card.

Compare the reinstall you did to Reinstall tutorial below, particularly how drivers are handled.

Consider doing it over but testing performance first after install, then after each group of Updates restart, after eachi driver installed after Updates provides its drivers , after each program install. This pinpoints what's causing problems.

You can also boot and run with a boot disk with HD unplugged which will elininate HE and software as cause. http://www.sevenforums.com/tutorials...cy-backup.html


My System SpecsSystem Spec
.
14 Oct 2014   #12
dannyk90

Windows 10 Pro
 
 

If it happens again, I shall then try those next steps.

I have just ran a PassMark performance test to upload benchmarks, it was kind of a stress test for all components, the pc was fine, did not hang.

PassMark Software - Display Baseline ID# 302397
My System SpecsSystem Spec
15 Oct 2014   #13
dannyk90

Windows 10 Pro
 
 

LOTS MORE CLUES AQUIRED

It tried to crash again as I was restarting for windows updates - it almost crashed but I managed to get the ctrl+alt+del menu, that is where I found an error message strangely enough..

The error message: Screenshot by Lightshot

After it shut down, it stopped on the black screen before the motherboard logo post. I checked the code my motherboard displays on crashes and it has a code of (53).

(50-53) in the handbook means: Memory initializing error. Invalid memory type or incompatible memory speed.

My ram is ddr4 2133mhz, motherboard is asus rampage extreme V rog.


So I rebooted my pc and the thing I saw was a message saying that the overclocking failed press f1 to go into the settings (bios).
So I went into bios and chose "EZ Tuning (overclocking)" I let the board overclock my motherboard automatically.

Before this I have not attempted any overclocking.
My System SpecsSystem Spec
.

15 Oct 2014   #14
gregrocker

 

I would not overclock.

Earlier you said you tested RAM - Test with Memtest86+
for one pass which took 55 minutes? This does not sound right.

Follow the steps in tutorial exactly for testing for at least 6 passes.

Work through the other Troubleshooting Steps for Windows 7
My System SpecsSystem Spec
15 Oct 2014   #15
dannyk90

Windows 10 Pro
 
 

The thing is it over clocks by it's self even without doing anything its just standard.

I shall run a mem test over night then

Already been through the troubleshooting steps thanks
My System SpecsSystem Spec
18 Oct 2014   #16
dannyk90

Windows 10 Pro
 
 

I was out the whole day so I let memtest run. It ran for 6h40m and had told me it was finished. No errors found.

Screenshot by Lightshot


Also my dns server keeps stopping - rarely though. I have tried different servers and the one I was on before was Google and now its the free open thing that is default for everyone, my friends with these DNSs had no problems like me.

I'm not sure what could be messing with my dns ? - Programs were working fine with internet, just the web browser wouldnt work.
My System SpecsSystem Spec
18 Oct 2014   #17
gregrocker

 

You'll actually save time doing a diagnostic reinstall - testing performance after install, then after each round of Updates, then after each program install to pinpoint fail.

Use Clean Reinstall - Factory OEM Windows 7. Wipe the HD first with Diskpart Clean CMD with all others unplugged.
My System SpecsSystem Spec
23 Oct 2014   #18
dannyk90

Windows 10 Pro
 
 

It can take about 5 days until it will do it again, that would be just too much of a pain to do.

It did it again just before Rust (game) launched, keyboard and mouse lights turned off but screen and pc lights still on.

I have a feeling it could be to do with Samsung SSD magician configuring my system settings, I changed it to best reliability now instead of best performance. I also reseated my graphics card.
My System SpecsSystem Spec
01 Nov 2014   #19
dannyk90

Windows 10 Pro
 
 

Well its been a week or longer and pc is fine. Looks like I found the culprit !

SAMSUNG SSD MAGICIAN
My System SpecsSystem Spec
Reply

 Pc stops bit by bit until it needs a restart




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win 7 Ultimate install Stops after First Restart in Custom On New HD
New HD in Dell Studio laptop, partitioned. Have tried valid/new DVD installing Windows 7 ultimate, custom, for clean install on clean drive. Gets through first 4 steps in install to first restart/reboot while in "completing installation" mode, and quits to black screen, no blinking cursor. Have...
Installation & Setup
windows update stops, and PC cant restart
I was installing an update when right in the middle it stops. If I try to restart windows it fails on the windows loading screen, forcing me to restore windows which I hate to do because it messes up my Flight Simulator program. Please advice needed. I didn't get any error message it just...
Windows Updates & Activation
Aero stops working, won't work again until restart
Can't quite nail down when this happens but from time to time the Aero effects will stop working. So far it does seem to happen if the screen has been blank for awhile (screen saver) but something else has to happen as well because that by itself doesn't cause the issue. This last time it...
BSOD Help and Support
printer spooling stops even after a restart
I have been using windows 7 without a problem on my laptop for about 3 months now. I have all the updates installed. I have a series of printers that have worked without an issue for the past 3 months. Just yesturday, I was in adobe and tryed to print a PDF when the program said I have no...
Hardware & Devices
Explorer Stops responding restart loop
I have been searching for a fix to my problem. As soon as windows starts I get explorer has stopped responding and is restarting, have tried starting in Safe mode and it does the same. Have tried sfc /scannow and has not fixed the problem. I read somewhere that it may be a file that did not...
BSOD Help and Support
My ATI radeon 200 stops working when I restart
:mad: Im running windows 7 (obviously) 64 bit. and my ATI driver was working fine, and the aero themes were working until one day when I restarted, and my aero themes stopped working! when I right clicked on my desktop and click >Personalize. and click the troubleshoot link at the bottom, that...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App