Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: cant boot pc in ANYWAY!

19 Nov 2014   #1
trewajg

Windows 7 Ultimate x64
 
 
cant boot pc in ANYWAY!

My pc couldnt boot in any way so I reeinstalled windows ( after a lot of tries ) and now I cant boot it as well, but I was able to do It twice and on both times a boot device ( from when you press esc when the pc starts ) disapeared and I was left with two boot devices, when it came back I couldnt boot again, what should I do?

Note: I cant use system repair ( our whatever its called) since it freezes , I cant use the windows disk since it freezes either I press setup or repair, I cant use safe mode since it stops at CLASSPNP.sys, I cant start it normally since it freezes at the windows logo and there is a boot device that if I select it shows "BOOTMGR is missing press Ctrl+Alt+Del to restart"


My System SpecsSystem Spec
.
19 Nov 2014   #2
Shimshom

Windows 7 Ultimate x64
 
 

Hi and welcome to 7F. Would be very helpful if you completed your System Specs please. When reinstalling Windows did you disconnect all other hard drives and had only the drive you're installing Windows on connected. Go into your BIOS and set your CD/DVD drive to be the 1st boot device or if installing from a USB stick set that to be the 1st boot device. Try to reinstall Windows using this guide and see if that helps
Clean Install Windows 7
My System SpecsSystem Spec
19 Nov 2014   #3
oscer1

win 7 64 bit
 
 

Hi,

you also might want to check the hard drive. use the manufatures diagnostic tools to do that. Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp. if you do not know the brand of hard drive can try seatools for dos. SeaTools for DOS | Seagate works on most drives
My System SpecsSystem Spec
.

19 Nov 2014   #4
matts6887

Windows 7 ultimate 64-bit
 
 

Quote   Quote: Originally Posted by trewajg View Post
My pc couldnt boot in any way so I reeinstalled windows ( after a lot of tries ) and now I cant boot it as well, but I was able to do It twice and on both times a boot device ( from when you press esc when the pc starts ) disapeared and I was left with two boot devices, when it came back I couldnt boot again, what should I do?

Note: I cant use system repair ( our whatever its called) since it freezes , I cant use the windows disk since it freezes either I press setup or repair, I cant use safe mode since it stops at CLASSPNP.sys, I cant start it normally since it freezes at the windows logo and there is a boot device that if I select it shows "BOOTMGR is missing press Ctrl+Alt+Del to restart"
Also; here is another link in addition to shin's that may help ya out:

Troubleshooting Windows 7 Failure to Boot

Even though it involved some steps used in system repair; still; you could try the steps and see if anything works for ya.
My System SpecsSystem Spec
20 Nov 2014   #5
trewajg

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by matts6887 View Post

Also; here is another link in addition to shin's that may help ya out:

Troubleshooting Windows 7 Failure to Boot

Even though it involved some steps used in system repair; still; you could try the steps and see if anything works for ya.
Would the antivirus ( step 2 ) work on my second hard drive? Because on the 2 times I was able to boot sucessfully my second hard drive was gone, maybe there are virus in it
My System SpecsSystem Spec
21 Nov 2014   #6
gregrocker

 

Unplug the other hard drive to do the repairs as it may be interfering. Only after you get Win7 repaired or reinstalled would I plug back in the other HD, makings sure the WIn7 HD remains set first to boot in BIOS.
My System SpecsSystem Spec
24 Nov 2014   #7
trewajg

Windows 7 Ultimate x64
 
 

Thanks, its solved, I unpluged one of the hard drives and then (finally) it did the system repair. Thanks
My System SpecsSystem Spec
Reply

 cant boot pc in ANYWAY!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Dual Boot: Win7: Boot Manager Status: 0xc000000f boot selection failed
Hello, I have dual boot in my laptop with Ubuntnu 14.04 LTS and Windows 7 Home Premium 64 bit. Today after working on Ubuntu I restarted and switched to Windows and as soon as it logged in I noticed the battery was 0%. I thought maybe it was some kind of glitch or something (silly me!) so I just...
General Discussion
Boot Freezes - Can only boot using Hirens Boot CD
I can only boot my machine using Hirens Boot off the hard drive. I have included 2 videos showing the issues. It loads to a Windows 7 screen but the ms colored flies / windows animation never loads. It freezes there. I've run the Windows 7 "upgrade" to resinstall install Windows 7. I didn't...
Installation & Setup
'Reboot and select proper boot device or insert boot media' error
I just put windows 7 on my computer not to long ago and all of the sudden I get this error message when i turn on my pavilion p6142p desktop computer "Reboot and select proper boot device or insert boot media in selected boot device and press any key" I have tried tightening my cords and checking...
General Discussion
Boot Priority & Boot Device Control for New SSD as boot drive
After reading through lots and lots of posts and tutorials, I'm still a little confused. I worked for a carpenter one summer when I was a kid and he stressed the philosophy of measuring twice and cutting once as a rule to live by. So, before I fire up my saw, I thought I would seek a little...
Installation & Setup
Can't boot, boot into safe mode or boot from dvd
So I have been trying to get my computer running for a few days now. At first it wasn't booting at all, it would be a black screen with a blinking cursor. I have cleared cmos a few times, turned psu off, drained charge from psu, turned psu back on and got it working that way for about 10 minutes,...
General Discussion
Won't boot unless I use "EDIT BOOT OPTIONS (F10)" at boot screen
In order to get my laptop running I have to press F10 at the boot, which brings me to a screen that says: EDIT BOOT OPTIONS edit windows boot options for: windows 7 path: \windows\system32\winload.exe partition: 3 hard disk: 350f350f ]
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App