Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need help with BOOT\BCD 0xc000000e

21 Nov 2014   #1
asumasa

Windows 7 Home Premium 64-bit
 
 
Need help with BOOT\BCD 0xc000000e

A while back my computer started acting up would randomly lock up and eventually blue screen and crash. After rebooting id get this screen....

Screenshot by Lightshot

regardless of whatever option i chose it would see on a pure black screen and not do a thing. Now more recently iv been getting this screen... sorry for poor image had to take it with my phone.

Screenshot by Lightshot

so i burned a repair cd from a friends laptop same OS and bit (Windows 7 Home Premium 64-bit) only difference it my desktop was Lenovo and his laptop is Acer but i didn't think this would matter. Now after botting from DVD drive with the CD inside takes me to the System Recovery however in the box it does not show my OS nor any other OS (see pic) again sorry for poor quality took with my phone.

Screenshot by Lightshot

I looked into this and read a forum saying this might be caused by an inactive partition. opened up command prompt did DISKPART then LIST DISK, and these are my results....

Screenshot by Lightshot

Any ideas on how to fix this or what could be the cause?

Just a bit of extra info I personally dont care about saving any files that may be on the hard drive as long as i can just get it running again. I mostly play video games so since my desktop when under iv been using my laptop being rather low end and only used for school work thing is unbearably slow when running any game even on lowest settings so the sooner I can get my desktop up and running again the better.


My System SpecsSystem Spec
.
21 Nov 2014   #2
asumasa

Windows 7 Home Premium 64-bit
 
 

Also during boot up when the "Lenovo" logo shows and pressing F12 to show boot options. The hard drive doesn't always show. Dont know if this is common or not, just something I figured id add. Iv tried various SATA cables different Power supply units just to see it there might be a broken cable and what not. Doesn't seem to change anything.
My System SpecsSystem Spec
22 Nov 2014   #3
asumasa

Windows 7 Home Premium 64-bit
 
 

sorry to bump just really need help getting this fixed
My System SpecsSystem Spec
.

Reply

 Need help with BOOT\BCD 0xc000000e




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
windows 7 boot manager error 0xc000000e boot selection failed because
My daughter's laptop(acer aspire) has the above error message. we have no installation disc but do have the product key. I created an installation disc from my laptop but it have my product key. A tried to get it to use this cd as the install cd but it appears not to be working, What should I...
Installation & Setup
Windows Boot Manager error 0xc000000e
Hi all, I am almost too embarrassed to post this but now it has come to the point where I'd rather be embarrassed than smash my laptop on to my head repeatedly. I changed laptops and ended up using a 250gb hdd I had been using as an external hdd as the primary and sole hdd in my old MSI...
Installation & Setup
SSD Installation failed to boot (0xc000000e ). Plz Help!
Hello, I am a computer rookie, so please forgive my ignorance. I just bought a new Lenovo T430s and a Samsung 840 Pro SSD. Cloned the system by using Norton Ghost (First cloned the hidden disk, then Windows 7 disk) as the manual (Samsung 830 manual) said. Then put the HDD out and put the SSD ...
Hardware & Devices
Windows 7 Boot error 0xc000000e
Hi, this morning when I went to run on my windows 7 32-bit installed PC, I was greeted by an error message saying "The boot selection failed because a required device is inaccessible". This is odd because last night it was working perfectly, with no problems. I've tried several solutions, like...
General Discussion
The boot selection failed 0xc000000e
I have an Intel i5, Windows 7 Ultimate, and SSD main and 2 HDs SATA. One day, blue screen BSOD appeared and Pc is restarted. Then appears the following error: Window failed to start. A recent hardware or software change might be the cause. To fix the problem: 1.Insert .... 2....
BSOD Help and Support
Boot Error 0xc000000e
Hello im hoping someone can help me. I was cloning a Win 7 Ultimate 64 bit install HDD on my HP Laptop and when it was done i removed the usb without safley removing it in the system tray. Now when i boot up (with the original HDD) i get an error: Windows failed to start. A Recent hardware or...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App