"BOOTMGR is missing, Press Ctrl+Alt+Del to restart"

Page 1 of 2 12 LastLast

  1. Posts : 18
    Windows 7 Ultimate 64-bit SP1
       #1

    "BOOTMGR is missing, Press Ctrl+Alt+Del to restart"


    I've been getting this problem lately when I turn on my computer. When I press the Ctrl+Alt+Del combination, the computer does restart but sometimes it still gives me the same screen again, so I need some luck to get past it. Sometimes it works, sometimes it doesn't. It's extremely bothersome.

    This is how the screen looks like:



    Why am I getting this problem now and how can I fix it?
      My Computer


  2. Posts : 72,050
    64-bit Windows 11 Pro for Workstations
       #2

    Hello Synnchan,

    This may be able to help. :)

    Bootmgr is missing - Fix
      My Computer


  3. Posts : 18
    Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #3

    I'm with a problem here. I have no blank CD/DVD to put my System Repair Disk into. So I created a virtual drive (G: ), and put the System Repair Disk there.

    But my computer has my physical drive (D: ) set as the first boot order. I need to access my computer's BIOS to change the first boot order to my virtual drive (G: )

    But I don't know how to access my computer's BIOS. I need to know what key to press.

    This is my computer's information:
    http://speccy.piriform.com/results/U...srlp8LgwolOwPu
      My Computer


  4. Posts : 1,519
    Windows 7 Ultimate 64-bit, Windows 8.1 64-bit, Mac OS X 10.10, Linux Mint 17, Windows 10 Pro TP
       #4

    What is the G: drive? Don't think a virtual drive can be made bootable but one of the USB drives could be used and the BIOS set to boot it first.

    Using a CD or DVD for the Repair disc is the cheapest way to go but one could also use a USB Thumb/Flash drive. I'd use the smallest size necessary for holding the files and since it has to be bootable it'd be best to nothing else on the drive or disc. During the writing of the data it most likely will delete anything on it.

    My Repair disc is on a DVD-R but you should be able to use either a DVD+R or DVD-R disc in your Optiarc DVD RW AD-7280S ATA Device. It probably is a Multi-Format model but don't use the RW discs.
      My Computer


  5. Posts : 6,330
    Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64 +Linux_VMs +Chromium_VM
       #5

    Try the DELete key to enter BIOS.
      My Computer


  6. Posts : 18
    Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #6

    I just went to the local store and bought a DVD-R, then wrote the System Repair Disk on it.

    But now I have a really weird problem. When I turn on my computer, this screen doesn't show up:



    What should I do now?
      My Computer


  7. Posts : 72,050
    64-bit Windows 11 Pro for Workstations
       #7

    How did you create it?

    System Repair Disc - Create
      My Computer


  8. Posts : 18
    Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #8

    Through here:

      My Computer


  9. Posts : 72,050
    64-bit Windows 11 Pro for Workstations
       #9

    In that case, you may need to boot to your BIOS, and check to see if you have your "boot priority" set to have the CD/DVD listed 1st and you Windows drive 2nd.

    Afterwards, see if you are able to boot from the DVD.
      My Computer


  10. Posts : 18
    Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #10

    I kept pressing the Delete key to enter BIOS mode and that sent me to a completely blue screen with a black square in the center. That scared the hell out of me.

    Why can't I just get things done.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Š Designer Media Ltd
All times are GMT -5. The time now is 03:17.
Find Us