Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: "There is not enough free memory to run this program" fix help

21 Dec 2014   #11
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

What Windows 7 do you have and where did you get it?
What operating did the laptop have from the factory?

Complete this tutorial by Brink and let use know the results.

SFC /SCANNOW Command - System File Checker

Please verify you did this correctly. If you do it wrong you will not get proper results.

Disk Management - Post a Screen Capture Image

"There is not enough free memory to run this program" fix help-today-only-aaaaaa.jpg





My System SpecsSystem Spec
.
21 Dec 2014   #12
Justhelpme

Windows 7 64 bit
 
 

It is Windows & professional, I got it from the Dell Website. If this information helps, what I got from F2 when I started my computer, it said that it was an Inspiron 5748

As for the repair, again it just didn't seem to work. Also, again I tried to use the disk management tool but Still nothing shows up even when I press the two tabs shown and the Snipping tool wont work, regardless if I restart my computer...


Attached Thumbnails
"There is not enough free memory to run this program" fix help-untitled.png  
Attached Images
"There is not enough free memory to run this program" fix help-untitled.png2.png 
My System SpecsSystem Spec
21 Dec 2014   #13
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

I don't understand. After posting all those pictures you are telling me the snippit tool isn't working. Well reboot and try it again.

I didn't know you could buy Windows 7 from a Dell Website.

If that doesn't work the only other thing I can think of is a Repair Install.

By Brink:

Repair Install
My System SpecsSystem Spec
.

21 Dec 2014   #14
Justhelpme

Windows 7 64 bit
 
 

oh, sorry I bought the computer from the dell website and it came with Windows 7 professional, as for the snipping tool, I already restarted and it just wont work, so the best I can come up with is print screens...

But I will check right now about the repair install

And thanks for sticking with me on this, not too many people would do that for pathetic people like me
My System SpecsSystem Spec
21 Dec 2014   #15
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

When many normal things in Windows 7 don't work it would take forever to tackle them one at a time. If you don't have a complete back up to go to and sfc /scannow doesn't help in my opinion a Repair Install is the next thing to do.

Read the Tutorial a couple of times. If possible when you do the Repair Install have the Tutorial on another computer so you can follow along step at a time.
In the last couple of months I have use that tutorial 2 times and both went well.

Just to help my curiosity; have you been using suggestion from the Black Viper site?
My System SpecsSystem Spec
21 Dec 2014   #16
Justhelpme

Windows 7 64 bit
 
 

No, I haven't used the black Viper Site, I just have been All over the net and decided that after 2 days of cycling through possible solutions that didn't work that I would ask a professional.
My System SpecsSystem Spec
22 Dec 2014   #17
Justhelpme

Windows 7 64 bit
 
 

This may seem a little annoying, but I used and followed the repair install link you gave me but right after I pushed the button for step 8 It gives me the issue in the picture below... Is that a normal occurrence and i simply misread a step or does it just mean that there is no way to do this?

Also I found a similar problem in the forums that seems to have solve the issue for the people that had it.
(Error: "There is not enough free memory to run this program")

They say in the forum posts that it has to do with the System and Users not having more or less unrestricted access to the registry hive "HKEY_CLASSES_ROOT\
Do you think that this could fix my problem as well? Because it would save alot of used data if it was possible...


Attached Images
"There is not enough free memory to run this program" fix help-untitled.png 
My System SpecsSystem Spec
22 Dec 2014   #18
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Ouch Mcafee live safe
Showing the services = Non Microsoft services and startup items might give us a better idea of what is loading,
I doubt clean boot would work with Mcafee around :/
How does safe mode with networking work ?
My System SpecsSystem Spec
22 Dec 2014   #19
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

To make sure I understand.

When you tick on the Install Now button in step #8 you don't get the picture shown in step #9?

You just might have something there ThrashZone.
McAfee just might be stopping access to the disk when in Windows 7.

I would suggest removing McAfee using their online tool and start the tutorial over.
I do not recommend using McAfee when your fixed. Install MSE.
My System SpecsSystem Spec
22 Dec 2014   #20
Justhelpme

Windows 7 64 bit
 
 

As for trying to clean boot it from safe networking mode it doesn't really do much, I checked to make sure if there was anything that wasn't working normally would work in that mode but it pretty much was the same
- The control panel is down
- folders wont open unless you do it manually
- The audio detects no audio devices
- and for some reason the internet is limited

I can say that I might of found something that was useful though, I was looking in the registry to see if their was a problem their and i noticed that all the default values available said under data that their value wasn't set... I'm not sure if this is normal or not but i'm trying to give you the best understanding of this situation as possible.


Attached Thumbnails
"There is not enough free memory to run this program" fix help-untitled.png  
My System SpecsSystem Spec
Reply

 "There is not enough free memory to run this program" fix help




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Diff.between "available" and "free" physical memory?
When I look into the "Performance" tab of my TaskManager then there are the following values: Total: 4014 Cached: 1299 Available: 2697 Free: 1532 Hmm, What is the difference between available and free space? Shouldn't this be the same?
Performance & Maintenance
Error: "There is not enough free memory to run this program"
Hey there... it all started out when i was trying to install VisualStudio 2008 C# Express Edition... the first time i tried that it told me it couldn't access the specified registry key, so i used subinacl to gain ownership and access on keys under CLASSES_ROOT\VisualStudio* ...only the wildcard...
BSOD Help and Support
Program to "interpret" key strokes, and "convert" them to another?
I'm looking for a program capable of interpreting one key and changing it to another, like a middle man. So, in a simple example, output the letter "b" when I push "a". Or in a more complex example, convert things like movements of a joystick into movements of a mouse, or triggers on the joystick...
Software
"Program too big to fit in memory".
Hey, everyone. I have a laptop here, which keeps giving me an error when I try to run applications. The error, as stated in the title, is "Program too big to fit in memory", which flashes up for a second in a cmd window. I have tried reinstalling XP on FAT32 and NTFS, and I have also tried...
General Discussion
the task bar "folder" pinned "program"
I usually use it by pinning my frequently use folder, so when I right click, the list of "pinned program (folder)" will be listed out, easy for me to access them in a click. and one day, all the pinned programs gone. so I attempted to "repin" all vanish folders, but even if I click to pin...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App