Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple drives, One Desktop, all drives recognized in network

08 Jan 2015   #1
colarguns

Windows 7 Professional 64 bit
 
 
Multiple drives, One Desktop, all drives recognized in network

Hi All,

I have (4) hard drives that already have Windows 7 installed on each. My rig is a custom build, so as for Motherboard, I have:

Motherboard: Gigabyte G1.Assassin (has two 6GB/s SATA ports, and four 3 GB/s SATA ports) if not mistaken. I would put eligible drives on the 6 GB/s ports, and the others on the 3 GB/s ports. I know, my MB is ancient now!

The "new" drives are already connected via SATA ports, and both are functional, but one is extremely slow, and I believe it is because I didn't install them correctly. Missing drivers or something, not sure.

Here are my issues, broken down:

1. I have two choices to make, first is to use the "fastest HDD" as my primary, and the other 3 HDD's will be used as storage. Second choice is to induce RAID 10 or whichever is recommended. If I go with RAID, please point me to a site where I can use as a guide on how to do that correctly, as I have never done that before. Unless of course it is a simple process, and can be explained here. I just didn't want to have to go back and forth on this board, while becoming a nuisance.

2. Going with the best recommendation based on #1 above, I need to resolve network recognition issues. I use the WD Mycloud 3TB as my backup. I like it because I travel a lot and I can easily use the app to pull up any document, picture, video, etc., while knowing that I don't need to pay a monthly fee to someone else. However, 50% of the time when I boot up, I see (Could not reconnect network drives, etc.) appear in service tray. I need all drives and WD MyCloud to talk to one another on the network, as apparently they are not half the time. From research, it seems that Microsoft acknowledges this as their own design flaw. There are some with different variations of bypassing MSFT's design flaw, by using scripts, changing the registry, or Group policies, etc. This is where I get lost and need help.

Reminder: Currently, all drives have Windows 7 installed. I will be conducting a clean install on all drives this weekend, just to ensure My computer is getting a fresh start. If not needed, or I need to format them first, please advise.

3. My memory is out playing somewhere else right now, as I cannot recall "what" I need to install BEFORE I actually install the first hard drive/s. For starters, I realize that I need to ensure the BIOS is up to date. But aren't there "Drivers" that I need to install for SATA purposes before the HDD talks to it? Or drivers other than this? Otherwise, the needed functionality will be lost if you don't install that first. I am just reiterating what a MSFT support site mentioned, but now can't remember all! Sorry.

4. One last concern, is that my drive letters change when I boot into my second new drive (shown in attachment). When I am on the primary, the drive letter is C. When I boot into the slave, (as I have configured in BIOS to be as such), the drive letter for the slave is now C. Also the Reserve partitions change their letters as well. This has to be confusing just about every piece of software I have installed. Do I need to partition these differently in order to make their drive letters stay consistent? I guess if I went with a RAID configuration, this wouldn't be happening?

Disk Management Screen Shot and Network are attached.

My task this weekend is to backup all data from all drives, and afterwards was intending to do a clean install of Windows 7 Professional on all drives, just so I know things are starting off new and clean. But the above issues or concerns need to be addressed if there is someone out there that knows what I need. Thanks!




Attached Thumbnails
Multiple drives, One Desktop, all drives recognized in network-disk-mgmt.jpg   Multiple drives, One Desktop, all drives recognized in network-network.jpg  
My System SpecsSystem Spec
.
08 Jan 2015   #2
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

I'll bite:

Why 4 Windows installations?
My System SpecsSystem Spec
09 Jan 2015   #3
colarguns

Windows 7 Professional 64 bit
 
 

Want my honesty? Because I am computer illiterate. Perhaps you could explain to me how this should go? Thanks!
My System SpecsSystem Spec
.

09 Jan 2015   #4
colarguns

Windows 7 Professional 64 bit
 
 

Quote   Quote: Originally Posted by ignatzatsonic View Post
I'll bite:

Why 4 Windows installations?
Realistically I know the fundamentals on most things computer. However, when it comes to the Motherboard, RAM, and all the other gizmos that light up in there, well, I tend to get color blind. My first computer was a Tandy that I bought from Radio Shack I think in 89, and I the cpu speed was 33mhz, and a year later they came out with 66mhz, and everyone was WOWED! Not being a smarty with you, but I honestly don't know, which is why I came to this board with high hopes. Thanks!
My System SpecsSystem Spec
09 Jan 2015   #5
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Whichever windows you`re booted into will be C, totally normal.

Only 2 drives in your disk mgnt shot, so I`m cornfused

Perfect scenario: Install Windows 7 on the fastest drive, use the rest for storage.

If you`re using 1 of those drives shown above for windows, then create a 250 GB install partition.

No need for raid, you want speed, just buy a solid state drive to install windows on.

SAMSUNG 850 EVO-Series MZ-75E120B/AM 2.5" 120GB SATA III 3-D Vertical Internal Solid State Drive (SSD) - Newegg.com

SAMSUNG 850 EVO-Series MZ-75E250B/AM 2.5" 250GB SATA III 3-D Vertical Internal Solid State Drive (SSD) - Newegg.com
My System SpecsSystem Spec
Reply

 Multiple drives, One Desktop, all drives recognized in network




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
All USB ports don't recognized usb drives but do see other devices
I can't remember exactly how this happened because it's been a cascading disaster. It started with my efforts to uninstall Crashplan. In the course of this I unplugged one usb drive (I have 6) from a hub while it was on. At the time everything seemed ok, but it was not the case once I shut down...
Hardware & Devices
Usb external drives not recognized
This problem just popped up on both my win 7 machines. Powered usb external drives (the ones that are based on standard hard drives and plug into the wall) are recognized, but the smaller usb powered ones are not. The drives work on the same computers when booted xp so it's not the usb itself. ...
Hardware & Devices
USB Storage Drives Not Recognized, Code 39
Yesterday my external hard drive, flash drives, iPod, and memory card reader, which are all USB mass storage devices were working fine. However, today none of them show up in explorer, and when they're viewed in device manager all of them have an error message that says, "Windows cannot load the...
Hardware & Devices
Dvd and cd rom drives not recognized
after I installed the windows 7 x64 beta my internal dvd-rom drive has failed to be recognized. I tried to use my external usb 2.0 cdrw drive and that isn't being recognized either. What is up and how can i fix it? p.s. i am using a Satellite A215 - S4747 laptop
Drivers
Network Attached Storage or extra drives on/in the desktop?
My story begins in the late 90's when I discovered 'the router'. I took my Dell P75, put it in the basement, ran an Ethernet cord upstairs (through a hole in the floor) into the router. Now with my fancy new Dell P266 I could read 'the server' downstairs :geek: I'll leave my discovery of VNC for...
Network & Sharing
USB Drives not recognized
Greetings, I have this problem that began just after one of the young ones yanked two USB hard drives from their sockets. The drives when plugged in don't dance anymore, in fact they don't even show up for the dance. Device manager doesn't see them, there's no little "da doo" when they're...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App