Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: CRC Error..HDD failure or Windows failure?

02 Mar 2015   #1
inwell

Windows 7 Pro x64 ,Windows 8 Ent x64 and Windows Xp SP2
 
 
CRC Error..HDD failure or Windows failure?

I have seagate hdd with windows 7 ultimate installed on partition C and the partition D for data.

Suddenly while booting, windows ask me for disk checking volume/partition D for consistency. If i let it check, the utility will run for endless time stucking at 6% mark . If i cancel the disk check, windows will take long time to load further to logon page and finally boots. But windows explorer wont show any properties for volume D (total space , used space etc). When clicked on D: icon, explorer will take a long time and finally will say DISK IS NOT FORMATTED..do you want to format it now ?



Disk management will show the volume as RAW


I checked the disk with minitools partition magic, and the volume shows NTFS and OK. I can also explore the volume and find all the files present on D drive. (not visible from windows)



CHKDSK with diff keys (/r / f etc) run from windows boot cd and the result is same..scanning wont go past 6-7% (File Record Segment xxxxxxxx Unreadable )


Any chance to make the volume accessible in windows again without loosing data ? !




Attached Thumbnails
CRC Error..HDD failure or Windows failure?-prob.jpg   CRC Error..HDD failure or Windows failure?-prob1.jpg   CRC Error..HDD failure or Windows failure?-prob2.jpg  
My System SpecsSystem Spec
.
04 Mar 2015   #2
paul1149

Linux Lite 2.8 x64 (full-featured, fast, rock-solid)
 
 

The first thing I would do is copy the data off the partition using linux, if you don't already have a backup. I would also take a system image. Then you can figure out if the drive is usable.
My System SpecsSystem Spec
05 Mar 2015   #3
inwell

Windows 7 Pro x64 ,Windows 8 Ent x64 and Windows Xp SP2
 
 

thank you paul....
I have already backed up my imp files . i have system image too.
now how can i make this volume visible in windows ? without formatting is it possible? (some partition tools)

latest info is seatools for dos shows failure in test result for both Short and Long test
My System SpecsSystem Spec
.

05 Mar 2015   #4
paul1149

Linux Lite 2.8 x64 (full-featured, fast, rock-solid)
 
 

If you have a backup you could delete and recreate the partition, run chkdsk /r and then retest. But if the data is important you probably will need a replacement drive. It's a good thing you are backed up.
My System SpecsSystem Spec
05 Mar 2015   #5
inwell

Windows 7 Pro x64 ,Windows 8 Ent x64 and Windows Xp SP2
 
 

paul...

As i said chkdsk command will not go past 6-7% for days....
After re partitioning and trying for fresh install, set is not completing at all... setup freezes randomly at any point...
My System SpecsSystem Spec
05 Mar 2015   #6
inwell

Windows 7 Pro x64 ,Windows 8 Ent x64 and Windows Xp SP2
 
 

btw , general question

if disk/partition is bad and windows wont detect it not windows show any files...how bootable tool disks / live cds can view and access data on these corrupted/bad partitions ?
My System SpecsSystem Spec
05 Mar 2015   #7
paul1149

Linux Lite 2.8 x64 (full-featured, fast, rock-solid)
 
 

Quote   Quote: Originally Posted by inwell View Post
paul...

As i said chkdsk command will not go past 6-7% for days....
After re partitioning and trying for fresh install, set is not completing at all... setup freezes randomly at any point...
Sometimes deleting the partition frees up chkdsk. But not this time. Time for a new drive.

Not sure why Windows doesn't see the data, but perhaps the basic partition info got corrupted. Windows only sees some partition types. For instance, it doesn't see Linux. Just one corrupted bit could do this.
My System SpecsSystem Spec
Reply

 CRC Error..HDD failure or Windows failure?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows update Failure error 80072EE2
I have been trying for long time to get windows update but always got error 80072EE2. I have try anything I come across but no result. Computer I am using is company computer and we work at sea. Satellite connection is good and no problem with downloads or file transfer. Try disable firewall...
Windows Updates & Activation
Windows Update Failure (error 80072EE2)
I have been trying to get Windows Update to work for the past few days, with no luck. It seems to have started to go wrong after a series of updates were installed on 21st May. I am attaching part of the WindowsUpdate.log file, which includes the last successful update and the first unsuccessful...
Windows Updates & Activation
Pre-failure and Old-age questions -Drive headed for failure?
Hi, My SMART data reports pre-failure and old age in each category. It says overall health as "Passed". What do these mean and will a simple overwrite help it repair bad parts/sectors, or is this drive headed for failure in the very near future? Is there anything I can do in the interim to...
Hardware & Devices
Error 80070490 Windows Update Failure
Hello every one, I have been pointed here by vista64x forum they said that you guys are the professional. Issue: Windows Update failure 80070490 (Windows encountered an unknown error) (as attached) Attached also is the CBS.zip of my PC. Thanks and much appreciated,
Windows Updates & Activation
Windows 7 SP1 install failure, error 80070002
Hi guys, I have had this problem ever since SP1 was available and never was able to install it. The idea of doing a clean install doesn't interest me so I have avoided SP1 till now. But now the new AMD catalyst drivers require SP1 and was wondering if this problem was ever solved. I remember...
Windows Updates & Activation
Bootup Failure/Repair Failure/Corrupted Files
Hi Guys, First post here. I'm very discouraged with my new pc. I just built my first rig from scratch and have been having lots of problems ever since a recent thunderstorm. I made the most idiotic mistake of all time and forgot to plug the PSU AC supply into the surge protector and had it...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App