Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows always but to startup repair

25 Mar 2015   #1
cjik

windows 7 32 bit
 
 
Windows always but to startup repair

HI, last night I experience sudden power loss(before that my computar was on sleep mode) .And after that i left computar switch to the power and decide to turn it on after a few hours.My laptop is Toshiba Satelaite L650-10D.When I boot the laptop i select launch startup repair option but the startup repair didn't fix the problem.And when i try to selct view advanced opitions it only shows startup repair.I shut down the computar again and select start windows normally but again leads to startup repair.Then i press F8 and try to select safe mode and this leads me again to startup repair .After that i try to choose boot frrom last known good config but then computar shuts down.My windows is 7 32-bit version.
P.S. SOrry if there are mistakes but my first language is not englsh i hope you understands and hopes you can help me




Attached Thumbnails
Windows always but to startup repair-win_20150326_053827.jpg   Windows always but to startup repair-win_20150326_053838.jpg  
My System SpecsSystem Spec
.
25 Mar 2015   #2
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Do you have a Windows 7 32 bit install dvd, if you did you could run system restore by booting from the dvd.
My System SpecsSystem Spec
25 Mar 2015   #3
gregrocker

 

Unplug A/C/ power and battery, hold power button down 30 seconds to drain residual power.

Replace battey and A/C power, try powering up.

If it still wont boot, tap the F8 key to access System Recovery Options to try to System Restore working backward as far as necessary.

If this fails, everything possible is here for Troubleshooting Windows 7 Failure to Start leading up to if necessary rescuiing your files to run Toshiba factory recovery (google how it is done for your model) or doing the superior Clean Reinstall Windows 7

Quote:
To access the recovery partition do the following:
Power off the laptop.
Hold down the 0 (zero) key and turn the laptop on. Keep holding down the zero key until the TOSHIBA logo appears.
Start tapping the zero key repeatedly at this point.
Stop if the unit beeps or when the TOSHIBA logo disappears.
The screen should flash HDD RECOVERY MODE for a second and then it will load the Toshiba recovery program right from the hard drive.
Note that this erases all data, and reloads all factory default software.
My System SpecsSystem Spec
.

Reply

 Windows always but to startup repair




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 crashes on startup. Can't restore, repair or repair install
All of a sudden, my computer crashes every time when starting up the computer. When it gets to the "Windows" screen with the small moving dots that form the windows logo, it crashes just as they start their animation. I've tried using Startup Repair, as well as command line repair (possibly the...
General Discussion
BSOD during windows startup; can't safe mode; startup repair can't fix
Consistent BSOD during Windows startup for both normal mode and safe mode. BSOD problem started shortly after buggy installations of Microsoft Visual C++ 2005 x64, Microsoft .Net Framework 1.1, and AMD Catalyst Drivers 13.9; and turning off Microsoft .Net Framework 3.5.1. Startup Repair is...
BSOD Help and Support
Windows logo hangs, startup repair cannot repair windows
I have the weirdest problem with this computer I built over a year ago. Sometimes on boot up the windows logo will appear and then just hang there. The hard drive activity light stops blinking too. If I reset then it will come up say windows did not shutdown normally and wants to run startup...
General Discussion
Windows 7 won't startup properly - Stuck in startup repair loop
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to...
BSOD Help and Support
Startup Repair - windows cannot repair this computer automatically
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it...
Performance & Maintenance
Startup repair loop - Can't repair with system restore/repair/commands
Hello, I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App