Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows boot issue after installing additional Memory

03 May 2015   #1
Pavi1984

Windows 7 Ultimate 64 bit
 
 
Windows boot issue after installing additional Memory

Hi Team,
I have a custom built desktop system currently running on i3 Processor with Intel® Desktop Board DH55TC and 2 X 2GB DDR 1333 RAMs. I was earlier using Windows 7 Ultimate 32 bit OS but planned to upgrade the same to 64 bit OS. Along with this i also upgraded the Memory and purchased an additional 4GB DDR 1333 RAM module. I installed the new memory and the system detected it in BIOS and in the OS also till it was 32 bit OS. I then tried installing 64 OS and it would not let me do it and kept restarting. Then i just used the old memory cards and installed 64 bit OS, then installed the new Memory and it would again have the same issue. Motherboard has 4 mem slots and currently i have only populated 3 of them, is that the issue ?? Or is some kind of known issue with OS ?? Or somthing to do with Memory Voltage ??


My System SpecsSystem Spec
.
03 May 2015   #2
Ztruker

Windows 10 Pro X64
 
 

Sounds like one or both of the new memory modules is defective. Return for a replacement.

Have you tried running with just the two new modules?
My System SpecsSystem Spec
03 May 2015   #3
Pavi1984

Windows 7 Ultimate 64 bit
 
 

Thankx for the reply, but i only purchased 1 new 4GB card. I already got it replaced once thinking that it might have been the card but that did not help :-(.
My System SpecsSystem Spec
.

03 May 2015   #4
Berton

Windows 7 Ultimate 64-bit, Windows 8.1 64-bit, Mac OS X 10.10, Linux Mint 17, Windows 10 Pro TP
 
 

Quote:
Along with this i also upgraded the Memory and purchased an additional 4GB DDR 1333 RAM module
According to Crucial Home Page | United States (USD) that motherboard takes DDR3 memory, not the older DDR. Their current offering is DDR3 PC3-12800. It uses 2 banks of 2 modules [or 4 modules] for a maximum of 16GB.
Computer memory and SSD upgrades for Intel Intel Motherboards DH55TC from Crucial
Just a note, there can be problems using non-matched modules and sometimes not using in matched pairs.
My System SpecsSystem Spec
04 May 2015   #5
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Try just using the new stick you bought to see if it works by itself.

That will rule out if it`s a bad stick, but I would think it`s fine.

If Berton`s findings are correct, then ideally you would want 2 x 4GB sticks of DDR3 PC3-12800. 8 GB total is plenty.

If you can afford more then get 4 x 4 GB sticks, or 2 x 8 GB sticks.

2 sticks are easier on the memory controller of the cpu then 4 sticks

And always buy your memory sticks in a 2 pack or 4 pack.

I recommend Corsair Vengeance or GSkill Trident X.

G.SKILL - World's best performance DDR3 memory for desktop PCs, laptops, Macs & high speed SD flash memory cards.

Corsair â

Please post the exact i3 model.
My System SpecsSystem Spec
05 May 2015   #6
Pavi1984

Windows 7 Ultimate 64 bit
 
 

Thankx AddRAM, but i did try with just the new card and the funny thing with that was that it does not get me to boot to OS. It is getting detected fine in BIOS and the system does complete POST but as soon as it tried to load to OS it fails and keeps restarting. So i also think that either it has something to do with pairing or memory modules or some issue with drivers. Not sure though. I can buy another stick and pair it along but my concern is that if that too does not work for some reason than i am left with 2 new 4GB sticks
My System SpecsSystem Spec
05 May 2015   #7
Ztruker

Windows 10 Pro X64
 
 

Does it work if you do not out have any of the new memory in. If yes then return the new memory for a replacement as some of it is defective.
My System SpecsSystem Spec
06 May 2015   #8
gregrocker

 

Did you run the Crucial System Scanner software to find out what type of memory is in your computer?

That's always the first step, and then confirm it via google by comparing your model PC or mobo + RAM Upgrade. I don't buy until I know beyond doubt it's the precise replacement.
My System SpecsSystem Spec
Reply

 Windows boot issue after installing additional Memory




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Boot stalls when adding additional Sata Drives
I've recently reinstalled Win7 64bit to my Mushkin enhanced Deluxe 240gb SSD. This drive had a missing MBR. I was finally able to reformat it and install Windows after changing the boot to Legacy Only in the Gigabyte BIOS. After installing all the updated drivers and video drivers in the new...
Hardware & Devices
Installing Additional SATA Hard Drive - Inquiry
Hello everyone, me again, thanking in advance for any comments or suggestions or opinions. My OS is windows 7 64bit and I am using H61M-P31G3 MSI mainboard. It has 4 SATA slots: SATA 1 for my 500GB HDD, SATA2 for my DVDRW Drive, and SATA3 & SATA 4 none connected I have an older PC with 200GB...
Hardware & Devices
Installing Windows 7 removes several GB of additional space each time
Windows 7 Ultimate x64 Intel 510 SSD Hello, I am having a problem where Windows 7 re-installations keep eating up large amounts of space on the drive. The first time I had to re-install the OS I did a "clean re-install" and found I was using 6 more GB than before. I shrugged it off as...
General Discussion
Additional memory installed not showing in system
I have a Gateway GM5442 with 2 1024 MB DIMMs memory originally installed and just upgraded it with two additional DDR2 PC2-4200 1 GB Samsung memory cards. The computer works as before, but the additional memory does not show in system. I use Windows 7 with 64-bit OS. I already checked that the...
Hardware & Devices
Installing additional RAM - need to know speed, type and size.
Hello, I have 2GB RAM on my Windows 7 Ultimate 32-bit. I would like to buy additional 2GB RAM making a total of 4GB. I know that 32bit Windows 7 will not detect 4GB of RAM so ill be installing 64Bit version. I have a AMD athlon x2 dual core 5000+ 64Bit processor at 2.60GHz. I just opened up my...
Hardware & Devices
Need help installing additional windows xp modes
I was hoping not to have to create my own post for this question but i'm kind of in a bind. Running windows 7 x64 ultimate, i already have xp mode and virtual pc downloaded, installed, and working. But, i did not backup the xp mode before i started installing programs on it. I would now like to...
Virtualization


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App