Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cannot register Isdone.dll using regsvr32

15 May 2015   #1
JustinGab

Windows 7 Ultimate 32 bit
 
 
Cannot register Isdone.dll using regsvr32

Hello guys, first of all, i would like to mention that windows 7 forums has played a big role in solving all the problems that have arised in my computer. I registered and joined the forums to bring a problem to the techies personally. The problem is when i try to install a blackbox repack game, the installation goes well until a part where a error pops up titled ISDone.dll. It says that the archive is corrupt. I've googled the problem and found out that my system was missing ISDone.dll file and so i downloaded the file from the websites that offer the dll files. The main problem is that i cannot register the dll file. I use the steps as mentioned, Run 'cmd' as administrator and type C:\windows\system32\ regsvr32 Isdone.dll. A pop up arrives saying "the module ISdone.dll was loaded but the entry-point dllregisterserver was not found. Make sure that it is a valid dll or ocx file and try again". Now i have disabled antivirus and tried again but the problem still persists. Two of my blackbox games end up in the Isdone.dll error. Helpful answers would be much appreciated .
Thanks,
Justin


My System SpecsSystem Spec
.
15 May 2015   #2
Alejandro85

Windows 7 Ultimate x64
 
 

Regsvr32 is only useful for ActiveX libraries, not for every dll in the system (most times it's not needed at all). The error message clearly indicates that the library is NOT ActiveX (by the fact that it doesn't exports DllRegisterServer), so regsvr32 is not needed.

Copying the file to where the program can find it should suffice. The best place is in the same folder as the main executable, or alternatively, in system32/syswow64 (depending on the bitness of the program).
That would fix the problem with that file at least.
My System SpecsSystem Spec
16 May 2015   #3
JustinGab

Windows 7 Ultimate 32 bit
 
 

Hello Alejandro. I tried copying and pasting the isdone.dll file in the folder where setup files were existed. But isdone.dll error seems to come again. I went through some of the youtube videos on how to register isdone.dll and i can clearly see that regsvr32 registers the dll file successfully. I guess the problem is with the isdone.dll not being registered.

Also i wanna know if the dll file's language has got to do anything with this because my downloaded isdone.dll is in russian language. If someone can come up with a solution, it would be greatly appreciated!!!
My System SpecsSystem Spec
.

16 May 2015   #4
Alejandro85

Windows 7 Ultimate x64
 
 

You should drop it in the folder where the installed program's final executable lies, not with the installer. The error you posted initially clearly indicates that regsvr32 is not needed, so I would have to suspect your download. If it's from a random site off the web, there is a chance that it's indeed a virus trying to disguises as a legit program, or just another unrelated file with the same name. What happens with the original file that comes with the installer?
My System SpecsSystem Spec
22 May 2015   #5
JustinGab

Windows 7 Ultimate 32 bit
 
 

No the installation does not even complete. It gets stuck at 12.5% exactly in one game and 57% in the other. The isdone.dll error pops up when the installation reaches these percentage of completion.

And about the setup files, i downloaded from the blackboxrepacks.com website. Completely free of virus, i guess.
My System SpecsSystem Spec
22 May 2015   #6
JustinGab

Windows 7 Ultimate 32 bit
 
 
How to export an entry point to a dll module

So i ve been having some problems with registering isdone.dll using regsvr32. I get an error "the module " isdone.dll" was loaded but the entry point DllregistryServer was not found. Make sure that "isdone.dll" is a valid DLL or OCX file and then try again". After doing some googling, i've led to a new fact that the error what regsvr32 showed explains that the entry point of the module was not exported. So i need help on how to export the entry point of the module. Thanks in advance
My System SpecsSystem Spec
23 May 2015   #7
Alejandro85

Windows 7 Ultimate x64
 
 

The error is crystal clear, "the entry point DllRegisterServer" always means that the DLL is NOT ActiveX and as such doesn't needs regsvr32 at all. You cannot export the function (you need to recompile it).

I'm suspecting that the DLL you downloaded is either fake or unrelated (by chance having the same name). Since you got it though a third party site, you cannot warrant that it's original.

Are you sure that the game is compatible with Win7? Older programs and games specially sometimes have installation/runtime problems due to the many incompatibilities Microsoft has introduced in newer Windows versions, as well as poor programming practices on software development. What about running the installer in compatibility mode?
My System SpecsSystem Spec
16 May 2016   #8
Roiemen

Windows 7 Home Basic 64bit
 
 

i have the same problem too in battlefield 2142 i hope somebody finds a fix
My System SpecsSystem Spec
Reply

 Cannot register Isdone.dll using regsvr32




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
regsvr32 error
I am trying to register bthserv.dll in my registry as the bluetooth support service is missing from my services.msc; Dont ask how that happened! when running the command regsvr32 bthserv.dll im getting the error message; "the module bthserv.dll was loaded but the entry-point dllregisterserver...
BSOD Help and Support
Regsvr32 Error - PLEASE HELP
Hi All, I keep getting this error message every time I log on to my laptop. It's windows 7 64 bit. "The Module "C:\ProgramData\xklyoryq.dat" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files" ...
General Discussion
RegSvr32 Issue
The module was loaded but its entry for dll register server was not found. I suspect due to the file was downloaded from unreliable source. So what i do is try to compare from other file system that already installed in the same directory but different folder. And here's the result...
General Discussion
Regsvr32 Problems
Hi, Im running windows 7 ultimate x64 and trying to register a dll file using regsvr32, but everytime i try to in command prompt i get this error. I also tried: Running CMD as admin. Putting the dll file in the directory with the programme im trying to run. i also tried to put the dll both in...
General Discussion
Regsvr32 error when tryng to register ChilkatCrypt2.dll
I get this kinda error: http://www.upload.ee/image/2044274/regscr.png When tryng to register it in my asus k533t. But when registrering with my other computer, which is Dell, it registres normaly. Both files are the same. Both computers are 32bit.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App