Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: disable "hardware, Advanced, System Protection, Remote" tabs in system

04 Aug 2015   #1
flaxor

windows 7
 
 
disable "hardware, Advanced, System Protection, Remote" tabs in system

Hi all
I want to disable "hardware, Advanced, System Protection, Remote" tabs from system properties dialog box( screen shot attached).
The user should only able to access change computer name feature. Other feature should be disabled/removed.
I there any way to achieve it?
thanks in advance.


IMG]https://social.technet.microsoft.com/Forums/getfile/703346[/IMG]


My System SpecsSystem Spec
.
04 Aug 2015   #2
Alejandro85

Windows 7 Ultimate x64
 
 

I'm inclined to say no, for a very simple reason.
Changing the computer name requires administrator access. Given that, the user already has full control over the entire computer, therefore he can change whatever he wants.
What's the purpose of such "limitation"?
My System SpecsSystem Spec
04 Aug 2015   #3
flaxor

windows 7
 
 

Thanks for your input Alejandro85.

i want my secondary administrator to change the computer name only.
i don't want it to change or run any other diagnostic tool(ex: defrag.., or enable DEP).
so the complete purpose of it is to just reduce surface area for secondary administrator.
My System SpecsSystem Spec
.

05 Aug 2015   #4
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

As far as I know their is no half way administrator privileges.
Either they have administrator privileges or they don't.
If they have administrator privileges they can change everything or anything.

Is this computer in a domain/network or is it a stand alone computer?
My System SpecsSystem Spec
05 Aug 2015   #5
flaxor

windows 7
 
 

it is a stand alone computer.
and to the phrase you said administrators can access anything, we have already taken care of it.

apart from this window, secondary user cannot access anything which is related to this thread.
But this dialog-box give it access to other modalities also.
My System SpecsSystem Spec
Reply

 disable "hardware, Advanced, System Protection, Remote" tabs in system




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
"Found New Hardware" Balloons - Enable or Disable
How to Enable or Disable "Found New Hardware" Balloons During Device Installation When a PnP device is first connected to a run-time image, the run-time image typically displays a Found New Hardware balloon pop-up that reports detection of the device and, when applicable, begins the driver...
Tutorials
Create "Restore Point" -- system protection is OFF ?
I am trying to create my first ever "restore point". Start > Settings > Control Panel > System (icon) > System (window) > System protection (item) > System-Properties (dlg) ----- System Properties (dialog) > System Protection (tab) There are two Available drives in the "Protection Settings"...
Backup and Restore
How to disable Systray icon "Safely remove hardware and eject media"?
In my Systray there is an icon "Safely remove hardware and eject media" which did not exist in WinXP. I guest this is for possible removing USB sticks from USB slots. However I should be able to remove USB sticks by just plugging them out. Per definition WinOS and hardware should be able...
General Discussion
System will rarely post. "Unknown" Hardware problem
-This is a repost, as last time i only had a single response, and no replies after that- Hello once again Sevenforums. For the last few days, i have had a rather frustrating problem with my system. It doesnt want to POST. Let me explain this; Turning the computer on is a mystery. The...
Hardware & Devices
I only get "system protection is turned off etc."
I only get "system protection is turned off etc." than in the section where it tells you how to turn it on, it says: "Click to open System. In the left pane, click System protection. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. "...
Backup and Restore
disable system tray balloon "cannot connect to drive"
Hello and good day! I have a Network Access Server (NAS) which I use solely to store files. I don't necessarily use this drive each time I boot Windows 7 (Ultimate), but I have several folders mapped ( \Lan_Drive\<user name>; \Lan_Drive\Music; \Lan_Drive\Pictures) as drives. In order to...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App