Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ''cursor is not valid'' after failed HP update

03 Sep 2015   #1
Dumbledore1

 
 
Windows update problem

asa


My System SpecsSystem Spec
.
05 Sep 2015   #2
Dumbledore1

 
 

eer
My System SpecsSystem Spec
05 Sep 2015   #3
Dumbledore1

 
 

mps
My System SpecsSystem Spec
.

05 Sep 2015   #4
strollin

W10 Pro desktop, W10 laptop, W10 laptop, W10 Pro tablet (all 64-bit)
 
 

You said you had created a 25GB partition that was too small, then used partition Wizard to extend that to 5GB. I assume that was a typo and you really meant you extended it to 50GB. 50GB should work but unless your disk is really tiny, I would probably go with a minimum of 60GB. How much free space do you have currently on your Windows partition?

Not sure why Windows update would be running so slow. Do you have a decent internet connection? Are you able to use a browser and access websites? Is the browser's performance good or is it slow to load websites?
My System SpecsSystem Spec
05 Sep 2015   #5
Dumbledore1

 
 

vaas
My System SpecsSystem Spec
07 Sep 2015   #6
Dumbledore1

 
 

gappa
My System SpecsSystem Spec
Reply

 ''cursor is not valid'' after failed HP update




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
nvidia driver update failed in windows update
Hiya, just a while I ago I tried to install the NVidia driver update in my windows update but it says it failed after trying to install. Was wondering could this corrupt my video card driver or registery or can anything be done to make this error like it never happened before? Currently I'm using a...
Windows Updates & Activation
Security Update (KB2709715) - Failed to Update, Code 8020000E
G'day, I'm having some trouble installing the above update. I've run the MrFixIt utility, but still get an error trying to install this update. Can someone recommend a solution to try? This is an Asus X54C netbook running a clean install of Windows 7 Professional x64 OEM. Regards, Golden...
Windows Updates & Activation
Windows 7 wierd Micosoft update valid
I have Windows 7 32bit. I have Windows Update set to notify only. I have great AV real protection software running but something wierd just happened. I was on Ebay using Firefox and suddenly the browser froze and message that a script was trying to run click yes or no. I click no as I have...
System Security
Many failed update on history windows failed to configure startup
I have been receiving many failed updates, and i have tried methods like using the troubleshooting method to fix it. I have also tried downloading the updates from Microsoft center which still doesn't work as it stated as "ungenuine update"... I have been getting windows failure to update during...
Windows Updates & Activation
Install 7 on new hard drive with valid key, windows saying not valid
I am a part-time computer technician when I am not at my actual job doing IT Help Desk for the bank, and I have an issue with this laptop i am working on. Laptop specs: Toshiba Satelite L455D Windows 7 32bit (sticker does not say which version) (per belarc and magic jelly bean software) it...
Installation & Setup
Windows 7 update failed and laptop won't boot. Startup repair failed
I installed the latest round of Windows updates for my Win7 x64 install and it never completed (ran for about 24 hours) so I powered off the machine. Upon restarting, it said: "Windows failed to start. A recent hardware or software change might be the cause" and has instructions for using system...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App