Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 1GB Installed memory, only 1gb usable.

13 Nov 2009   #1
mty

Win 7 32 bit
 
 
1GB Installed memory, only 1gb usable.

I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you


My System SpecsSystem Spec
.

13 Nov 2009   #2
Irunongames

Windows 7 Home Premium 64 bit
 
 

Errrr I think you mean you have 2gb but it will only use 1. Is the slot for the RAM card working? Also is the Ram chip still working, a pin might not be working
My System SpecsSystem Spec
13 Nov 2009   #3
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by mty View Post
I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you
Boot into BIOS and look for max memory. should be unchecked
My System SpecsSystem Spec
.


13 Nov 2009   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by mty View Post
I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you
Boot into BIOS and look for max memory. should be unchecked

Ken J
My System SpecsSystem Spec
13 Nov 2009   #5
aem

Windows 7 Ultimate 64Bit
 
 

How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?
My System SpecsSystem Spec
13 Nov 2009   #6
mty

Win 7 32 bit
 
 

Quote   Quote: Originally Posted by aem View Post
How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?
check this link . it shows 2gb, but only 1usable - Bildr.no
My System SpecsSystem Spec
13 Nov 2009   #7
Tews

64-bit Windows 8.1 Pro
 
 

Quote   Quote: Originally Posted by mty View Post
Quote   Quote: Originally Posted by aem View Post
How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?
check this link . it shows 2gb, but only 1usable
What link??
My System SpecsSystem Spec
13 Nov 2009   #8
mty

Win 7 32 bit
 
 

Quote   Quote: Originally Posted by Tews View Post
Quote   Quote: Originally Posted by mty View Post
Quote   Quote: Originally Posted by aem View Post
How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?
check this link . it shows 2gb, but only 1usable
What link??
Bildr.no
My System SpecsSystem Spec
13 Nov 2009   #9
mty

Win 7 32 bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by mty View Post
I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you
Boot into BIOS and look for max memory. should be unchecked

Ken J
where in the BIOS do i find that ? i dont know so much about the bios itself
My System SpecsSystem Spec
14 Nov 2009   #10
aem

Windows 7 Ultimate 64Bit
 
 

Are you sure your RAMs have sitted correctly and firmly? Have u tried switching RAM slots?
My System SpecsSystem Spec
Reply

 1GB Installed memory, only 1gb usable.




Thread Tools





Similar help and support threads
Thread Forum
Installed memory (RAM): 6.00 GB (2.96 GB usable) . Is this correct?
Hi, hope everyone had a great Holiday:) I have windows 7 home premium 64 bit, 6 GB and so does the os, but why is it only allowing me to use 2.96gb. How do I get the pc to read the full 6 GB ? In the task manager and the sytem properies it reads : Installed memory (RAM): 6.00 GB (2.96 GB...
Performance & Maintenance
Installed Memory 6GB but 2GB usable.
My computer's memory was 2GB and i added 4GB more, but only 2GB is usable. I have tried many time take the Ram out and put it back but i still have the same problem. Can anyone help me? Sorry my bad English. http://www.freeimagehosting.net/newuploads/3l5th.jpg
General Discussion
Installed memory (RAM): 2,00 GB (1,00 GB usable) Help? :(
Installed memory (RAM): 2,00 GB (1,00 GB usable) ^^ Anyone know how I can solve this? Task manager reports only 1 GB is in use, I think the second GB would really give me a boost to play League of Legends. Any help would be great.
Hardware & Devices
all the installed memory (RAM) not usable??
I have a Evga X58 MOBO w/ the i7 proc and 6 gb of ram and now that i have win 7 installed its saying Insatalled memory (RAM) 6.00 GB (2.49) usable. ???? now does that mean that its only registering 2.49 of RAM and if that is so how do i get it to read all my RAM??? when i had vista installed on...
Hardware & Devices
Installed memory (RAM): 4.00 GB (3.75 GB usable)
I have Windows 7 Ultimate 64 bit, and I was wondering why my computer tells me that 3.75 GB out of 4 GB of installed RAM is usable. I've tried unchecking "Maximum Memory" under boot using msconfig, but it didn't change anything. I know its a pretty small thing, but please help.
Hardware & Devices
Installed/usable RAM memory?
When I check System Properties, it says Installed memory (RAM): 4GB (2.75GB usable). When I check Task Manager, it also shows me 2814MB Total physical memory. I am using Windows 7 RTM x86. How can I get all of my installed RAM working? I googled a bit, found out something about memory remaping...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App