New
#11
Ok mate I was just used to seeing that small partition.
Well I did some more work on the machine by cloning what I think is a failing drive to a small laptop spinner I had lying around replaced the drive SATA cable and put new compound on the CPU and just as well because where the dust has virtually cut of the air flow the compound I originally put on looked a tad on the burnt side Plus anew fan on the stock cooler which brought down the temp to 31C from 50+. I also found more completely blocked air vents which thankfully I had originally put a small screens on so easy to clean so in hindsight I should have stripped the lot down and not just done the obvious only because he told me he regularly cleans it out.
So it is now at a 1 minute 20 second boot which just wasn't happening when he brought the machine to me at least it is usable until we can fix him up with anew machine.
So in anticipation of it being solved thanks to all those who chipped in I really do appreciate it.
The 30 second wait is not required just uncheck it, as for plug and play set it to enabled.
Have a look at System Config, see if theres anything there that isnt required on start-up.
Roy
Thanks Roy that 30 second wait I am taking that as the wait in Advanced settings in System I set that to 5 and the msconfig I had nothing ticked ( I follow the Optimise tutorial like some demented demon LOL!!). My mate has it back now with a damn good lecture on cleaning the important bits like the stock cooler fins and fan flyers
But at some stage I will drop in a SSD that I have spare at my partners place plus a spare PSU from my stock I have built up and tested.