Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Stuck at black screen after "Windows is loading files"

27 Jun 2016   #21
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote:
I see, because 2 passes took like 5 hours, but anywayd ill do that, i wonder tho, what is memtest exactly?
Yes mate like I said it is very tedious and is best run overnight.

Now just supposing you have say three sticks and four slots and you get errors with all sticks in the slots. You then need to test each stick separately in number 1 slot again to find out which if the three sticks is bad. If the three sticks test out ok then you need to test a good stick in each of the slots you have been using because it can be that a slot on the board is bad.

The way it works is in that link I sent -

Quote:
Memtest86 and Memtest86+ are memory test software programs designed to test and stress test an x86 architecture computer's random access memory (RAM) for errors. Each tries to verify that the RAM will accept and correctly retain ARBITARY patterns of data written to it, that there are no errors where different bits of memory interact, and that there are no conflicts between memory addresses.



My System SpecsSystem Spec
.
27 Jun 2016   #22
Majd900

Windows 7 x64
 
 

Quote   Quote: Originally Posted by ICIT2LOL View Post
Quote:
I see, because 2 passes took like 5 hours, but anywayd ill do that, i wonder tho, what is memtest exactly?
Yes mate like I said it is very tedious and is best run overnight.

Now just supposing you have say three sticks and four slots and you get errors with all sticks in the slots. You then need to test each stick separately in number 1 slot again to find out which if the three sticks is bad. If the three sticks test out ok then you need to test a good stick in each of the slots you have been using because it can be that a slot on the board is bad.

The way it works is in that link I sent -

Quote:
Memtest86 and Memtest86+ are memory test software programs designed to test and stress test an x86 architecture computer's random access memory (RAM) for errors. Each tries to verify that the RAM will accept and correctly retain ARBITARY patterns of data written to it, that there are no errors where different bits of memory interact, and that there are no conflicts between memory addresses.
Okay if there was 0 errors with 8 passes whats the deal? So i can look forward of what i have to do.
Anyways, ill maybe get it to a repair shop.
Oh and one more thing; i ran hard drive test, and the remaning time was like 4 hours, after like 3 minutes; it said that the test cannot check the hard drive and that i need to replace it.
I then ran a memory test, memory diagnostic test too. 0 errors.
Ill run the memtest now.
Cheers m8=
My System SpecsSystem Spec
28 Jun 2016   #23
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate if there is no errors then it is then just tracking down the other components that just might be bad.

The hard drive well if you are getting a message to say it is bad then it will have to be replaced. Just out of curiosity what hard drive test did you use and how did you hook it up to another machine to test??

Now if the original hard drive is bad then whatever HP put on it will be probably unusable especially the factory restore partition which could have been used to take the machine back as when it came out of the factory.

If it were me I would be doing this before I start anything on that hard drive if you have data ie pics and docs that you need to save.
Emergency Kit - save your files from a dead OS or you can use my ditty
BOOTABLE UBUNTU
Make a bootable Ubuntu disk Get Ubuntu | Download | Ubuntu
Set the BIOS to boot from the optical when the machine boots it will show you a screen with TRY or INSTALL > select TRY not INSTALL
When it is finished - it takes very little time you will get a screen like in the pic .
Open the drive you want > User and dig down until you get to the data / settings you may be able to copy / paste the material you want to an external source or other installed drive doing this.
I am not sure if it will but I have recovered tons of data etc using this method both on "dead" or just plain drives that you cannot get data from using Windows.

Edit: I should have mentioned this fix does not involve running Windows


Attached Thumbnails
Stuck at black screen after "Windows is loading files"-ubuntu-screen-x2.png  
My System SpecsSystem Spec
.

09 Jul 2016   #24
Majd900

Windows 7 x64
 
 

Quote   Quote: Originally Posted by ICIT2LOL View Post
Ok mate if there is no errors then it is then just tracking down the other components that just might be bad.

The hard drive well if you are getting a message to say it is bad then it will have to be replaced. Just out of curiosity what hard drive test did you use and how did you hook it up to another machine to test??

Now if the original hard drive is bad then whatever HP put on it will be probably unusable especially the factory restore partition which could have been used to take the machine back as when it came out of the factory.

If it were me I would be doing this before I start anything on that hard drive if you have data ie pics and docs that you need to save.
Emergency Kit - save your files from a dead OS or you can use my ditty
BOOTABLE UBUNTU
Make a bootable Ubuntu disk Get Ubuntu | Download | Ubuntu
Set the BIOS to boot from the optical when the machine boots it will show you a screen with TRY or INSTALL > select TRY not INSTALL
When it is finished - it takes very little time you will get a screen like in the pic .
Open the drive you want > User and dig down until you get to the data / settings you may be able to copy / paste the material you want to an external source or other installed drive doing this.
I am not sure if it will but I have recovered tons of data etc using this method both on "dead" or just plain drives that you cannot get data from using Windows.

Edit: I should have mentioned this fix does not involve running Windows
I just bought a new hard disk with a capacity of 500 GB
And i installed Windows 7 Enterprise
But maybe i wondered if i could get the info from the old drive?
And i really hope that maybe if i can put on the old hard drive, i dont know
My System SpecsSystem Spec
09 Jul 2016   #25
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok now why Enterprise - is this a work machine?? The best option for me was that Ubuntu boot on the machine and hook the drive to the machine via a dock or SATA to USB adaptor to access that drive.
My System SpecsSystem Spec
Reply

 Stuck at black screen after "Windows is loading files"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Installation stuck at "Windows is loading files..."
Hi all! Wanted to do a nice clean installation on a HP Compaq dc7800 Convertible Minitower. Using known good Windows 7 volume USB which I have used a dozen+ times with no issues. I get stuck at "Windows is loading files..." as I don't think that screen is ever supposed to be there over an...
Installation & Setup
"Windows Loading Files" infinite loop, Can't Boot USB "disk error"
hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping pc's on - booting - then "Windows Loading Files" - restart it's infinite :cry: i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time...
General Discussion
Stuck at "windows is loading files" when doing a system recovery
I'm using laptop lenovo T430U, when doing system recovery process until half ways my laptop no battery then shut down. After that Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your...
Installation & Setup
Stuck at black screen that says "loading operating system"
I just installed a new motherboard into my compaq preserio and when the computer starts up I am greeted with a black screen that says "loading operating system...". When I plug the original motherboard in I am greeted with a black screen, nothing happens after that. I have already installed the new...
Hardware & Devices
Solved black screen after "loading windows" screen
I was having trouble starting my computer like many other people it seems - it would hang just after the "starting windows" screen appeared. I had a completely black/blank screen, no mouse pointer , nothing. The only way to overcome the issue was by powering down and restarting windows which...
BSOD Help and Support
Stuck at "Setup is loading" screen.. :-(
Hello all.. :-) Trying to install windows 7 on a different partition to multi-boot with windows xp sp3. Downloaded the "7600.16385.090713-1255_x86fre_client_en-us_Retail_Ultimate-GRMCULFRER_EN_DVD.iso" file and burned a DVD. Booted from the disc and all went well with the "press any key to boot...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App