Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 x64 installation stuck in Recovery mode

1 Week Ago   #1
XweAponX

Windows 7 (My Idea)
 
 
Windows 7 x64 installation stuck in Recovery mode

I've had this happen before where the system just keeps on wanting to go into recovery mode and check start up. With nothing wrong, it fails to find an issue or repair it. Then after a reboot it just wants to check itself again, over and over.

I can't remember how I got out of this boot loop before, but this time I just went into the boot folder and replaced the BCD file with The previous backup.

Which got me out of the recovery loop, but now the cursor just sits there on a black screen and it doesn't boot.

I even tried going into safe mode with command prompt and I wouldn't boot completely there either, it just hangs on the "black screen of death".

I have a further complication because I have an additional bootable system drive installed, (and that's where the boot folder is) with a 32-bit version of Windows 7, and I don't know if that is exacerbating the issue.


My System SpecsSystem Spec
.
1 Week Ago   #2
Megahertz07

Windows 7 HP
 
 

2G of memory in my opinion is the minimum for 32 bits.
4G of memory in my opinion is the minimum for 64 bits.

Is the Win 7 64 disk active?
Detach the Win 7 32 disk.
Boot with the win 7 64 installation disk an do a startup repair.
My System SpecsSystem Spec
1 Week Ago   #3
XweAponX

Windows 7 (My Idea)
 
 

I've got four gigs in there, needless to say it's been running great for the last six months

I've already done this, i've got the 64-bit system connected all by itself. I need to know the exact syntax for the DIS M command for running it through the recovery console. I already tried SFC, but it fails, I get a message that it is waiting to do some kind of repair operation but there are none scheduled.

I can get past the recovery boot up but I'm physically stuck at a black screen with the cursor.

OK I restored the original BCD file, then ran start up repair on it, it failed but I'm getting a message that I didn't see before:

e:\windows\system32\xntkrnl.exe is corrupt.

So I need to restore that file from the disc is there anyway to do it, or is there a previous version of that file stored somewhere?

OK crap this looks like that file is some kind of virus or something. I'll have to read to run BCDedit from the commandline and see what it says

OK I managed to delete the bad Kernel entry and the safeboot entry, no I need to replace the kernel entry with the right value. I'm trying boot recovery again maybe it will rewrite it properly. No it looks like it just a rewrote that bad Kernel entry into the system, so I think I'm going to try to replace in manually. I just don't know with the syntax would be, I don't want to delete the value I want to rewrite the value.

I'm going from here:

Safe Mode

I managed to restore the proper kernel, shut off safeboot, but it still boots to the black screen with cursor and it doesn't go anywhere after that. What else did I miss?

I found this:

Rajan : Computer Blog: How to Create a Clean BCD file to fix Windows 7 / 8 / 8.1 Boot problem

I followed each step and it was all successful, except that it is still stuck on the infuriating black screen of death! The GUI simply won't start.

This is driving me nuts!
My System SpecsSystem Spec
.

1 Week Ago   #4
XweAponX

Windows 7 (My Idea)
 
 

Any help with this? I got it out of recovery, but it is still stuck at a black scree with a cursor, and no GUI.

I have a 2nd partition on that drive with a bunch of storage, it's a 1TB drive, half of it is System the other half is storage, with a small System partition that has the boot entries in it. The system drive shows up as E:

Maybe I should change that to D, the assignments are C, Boot area, D, storage, and E, System partition.
My System SpecsSystem Spec
Reply

 Windows 7 x64 installation stuck in Recovery mode




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System stuck following recovery by NeoSoft Easy Recovery for Win7 Pro.
Hi, My system is multi-boot (XP,Win7, Win10) pc. I got stuck, unable to access my Win7 partition. I ran NeoSoft Easy Recovery for Win7 Pro, choose Repair, but ended up with a computer halted at the "Verify DMI Pool Data". Is there anything I can do to access, each and every OS om my drive?
Software
Dell Backup & Recovery stuck after failed Windows 7 re-installation
Hello everyone! Sadly my first post here is written under pretty bad circumstances. I am one of the many people whose systems (in my case a Precision 15 5510) were "automatically" upgraded to Windows 10 without warning, as Microsoft changed the status of Windows 10 from an 'optional update'...
Backup and Restore
Stuck at windows logon / recovery environment
Hi, I hope you guys can help... the other day I was reinstalling windows 7 when a power blackout happened ... the process was just starting, I mean really.. I literally clicked install windows and after like 5-10 seconds the power went out ... ok so after that I turn on the computer and I find out...
General Discussion
Stuck on Windows splash screen, safe mode stuck on classpnp.sys
After a power outage 3 weeks ago I was having issues with the system going down at around 5 minutes and then less and less time after that. I was told it was a display issue and to uninstall and reinstall my display drivers. I uninstalled my drivers and it was still the same. I felt like it was...
General Discussion
Asus CM1630 Stuck In Recovery Mode.
I've been trolling Google for about an hour now and haven't found anyone with this exact problem (which worries me a bit). My boyfriend got several viruses on his Asus desktop computer. After multiple attempts and anti-virus programs we decided that it was best to just go ahead and restore his...
Backup and Restore
OS installation gets stuck cant access safe mode either
Hi i have toshiba satellite A205 win 7 its been freezing a lot lately i dont know why so i tried to install win7 OS again (its not genuine) i usually do this successfully if i get virus but i dont think its virus this time but during the installation it got stuck it passes the copying windows...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App