Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows startup and programs very slow and unstable after BSOD

2 Weeks Ago   #1
Finn88

Windows 7 Ultimate x64
 
 
Windows startup and programs very slow and unstable after BSOD

Hi,
After having tried to fix a stability issue by doing changes in the bios my computer crashed. After some hours I finally maaged to start windows but the startup has become much slower. Before the changes it took the system about 1 minute to start now itīs rather 5 minutes. Also many programs run very slowly now and scans that would normally take half an hour now take 3-4 hours. The sound doesnīt work properly either and the CPU value is much higher than usual. Iīve done some quick scans for possible viruses but nothing was detected. Maybe I need to run a full scan but that would take a lot of time. I ran some fast scans with Iobit Malware Fighter and Malwarebytes Anti-Malware. Iīm not totally sure what caused these problems if it now was a change to default in the bios settings or anything else.

Code:
System specs: System Information Report
Operating System: Microsoft Windows 7 Ultimate
System Type: 64 bit
Central Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz x8
Video Adapter: NVIDIA GeForce GTX 680
Video Memory: N/A
Screen Resolution: 1920 x 1080
Video Adapter: Intel(R) HD Graphics 3000
Video Memory: N/A
Screen Resolution: NULL x NULL
Total Memory: 31.92 GB
Free Memory: 29.55 GB
Total Hard disk: 1863.02 GB
Free Hard disk: 1445.89 GB
Mouse: Razer Naga Hex
 
Keyboard: USB-enhet
Operating System
Organization: N/A
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601
Service Pack: 1.0
Product ID: 00426-293-8170014-85813
System Up Time: 2016-11-21 20:39:06
Internet Explorer Version: 9.11.9600.18524
Microsoft DirectX Version: 4.09.00.0904
OpenGL Version: 6.1.7600.16385 (win7_rtm.090713-1255)
Maximum Size: 2048 MB
Current Size: 148 MB
Status: OK
Memory Device
Total Memory: 31.92 GB
Used Memory: 2.38 GB
Free Memory: 29.54 GB
Memory Usage: 7%
Memory Bank: Bank0/1
Description: Physical Memory 0
Device Locator: A0
Capacity: 8.00 GB
Speed: 1333 Mhz
Manufacturer:
Data Width: 2304 bit
Memory Type: Unknown
Form Factor: DIMM
Memory Bank: Bank2/3
Description: Physical Memory 1
Device Locator: A1
Capacity: 8.00 GB
Speed: 1333 Mhz
Manufacturer:
Data Width: 2304 bit
Memory Type: Unknown
Form Factor: DIMM
Memory Bank: Bank4/5
Description: Physical Memory 2
Device Locator: A2
Capacity: 8.00 GB
Speed: 1333 Mhz
Manufacturer:
Data Width: 2304 bit
Memory Type: Unknown
Form Factor: DIMM
Memory Bank: Bank6/7
Description: Physical Memory 3
Device Locator: A3
Capacity: 8.00 GB
Speed: 1333 Mhz
Manufacturer:
Data Width: 2304 bit
Memory Type: Unknown
Form Factor: DIMM
 
Processor MainBoard
CPU Name: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz x8
Code Name: N/A
Manufacturer: GenuineIntel
Current Clock Speed: 3410 Mhz
Max Clock Speed: 3410 Mhz
Voltage: 1V
External Clock: 100 Mhz
Serial Number: BFEBFBFF000206A7
CPU ID: Intel64 Family 6 Model 42 Stepping 7
Socket Designation: Socket 1155
Internal Cache: 64 KB
External Cache: 8192 KB
Model: G1.Sniper 2
Manufacturer: Gigabyte Technology Co., Ltd.
Serial Number:
BIOS Name: Award Modular BIOS v6.00PG
BIOS Vendor: Award Software International, Inc.
SMBIOS Version: F5
BIOS Date: 2012-02-21
PCI is supported: Yes
Plug and Play is supported: Yes
BIOS is Upgradable (Flash): Yes
BIOS shadowing is allowed: Yes
Boot from CD is supported: Yes
Selectable Boot is supported: Yes
EDD (Enhanced Disk Drive) Specification is supported: Yes
Int 13h - 5.25 / 360 KB Floppy Services are supported: Yes
Int 13h - 5.25 /1.2MB Floppy Services are supported: Yes
Int 13h - 3.5 / 720 KB Floppy Services are supported: Yes
Int 13h - 3.5 / 2.88 MB Floppy Services are supported: Yes
Int 5h, Print Screen Service is supported: Yes
Int 9h, 8042 Keyboard services are supported: Yes
Int 14h, Serial Services are supported: Yes
Int 17h, printer services are supported: Yes
Int 10h, CGA/Mono Video Services are supported: Yes
ACPI supported: Yes
USB Legacy is supported: Yes
Drives
Name: WDC WD1000DHTZ-04N21V0 ATA Device
Media Type: Fixed hard disk media
Capability: 931.51 GB
Interface Type: IDE
Partitions: 1
Total Cylinders: 129201
Total Heads: 240
Total Sectors: 1953519120
Total Tracks: 31008240
Tracks Per Cylinder: 240
Bytes Per Sector: 512
Sectors Per Track: 63
S.M.A.R.T Support: Yes
Current Temperature: 0C (32F)
Name: WDC WD1000DHTZ-04N21V0 ATA Device
Media Type: Fixed hard disk media
Capability: 931.51 GB
Interface Type: IDE
Partitions: 1
Total Cylinders: 121601
Total Heads: 255
Total Sectors: 1953520065
Total Tracks: 31008255
Tracks Per Cylinder: 255
Bytes Per Sector: 512
Sectors Per Track: 63
S.M.A.R.T Support: Yes
Current Temperature: 0C (32F)
Name: ASUS BW-14D1XT ATA Device
Drive: E:
Transfer Rate: 10212.7659574468
Status: OK
Name: ASUS DRW-24B5ST ATA Device
Drive: F:
Transfer Rate: -1
Status: OK
Name: ATA Channel 1
Manufacturer: (Standard-IDE ATA/ATAPI-styrenheter)
Status: OK
Name: Intel(R) 6 Series/C200 Series Chipset Family 4 port Serial ATA Storage Controller - 1C00
Manufacturer: Intel
Status: OK
Name: ATA Channel 0
Manufacturer: (Standard-IDE ATA/ATAPI-styrenheter)
Status: OK
Name: ATA Channel 1
Manufacturer: (Standard-IDE ATA/ATAPI-styrenheter)
Status: OK
Name: Intel(R) 6 Series/C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1C08
Manufacturer: Intel
Status: OK
Name: ATA Channel 0
Manufacturer: (Standard-IDE ATA/ATAPI-styrenheter)
Status: OK
 
Display
Name: NVIDIA GeForce GTX 680
Video Processor: GeForce GTX 680
Manufacturer: NVIDIA
Video Architecture: VGA
DAC Type: Integrated RAMDAC
Memory Size: N/A
Memory Type: Unknown
Video Mode: 1920 x 1080 x 4294967296 colors
Current Refresh Rate: 60 Hz
Driver Version: 21.21.13.7595
Driver Date: 2016-11-16
Name: BENQ XL2411T (Analog)
Screen Height: 1080
Screen Width: 1920
Status: OK
Display
Name: NVIDIA GeForce GTX 680
Video Processor: GeForce GTX 680
Manufacturer: NVIDIA
Video Architecture: VGA
DAC Type: Integrated RAMDAC
Memory Size: N/A
Memory Type: Unknown
Video Mode: 1920 x 1080 x 4294967296 colors
Current Refresh Rate: 60 Hz
Driver Version: 21.21.13.7595
Driver Date: 2016-11-16
Name: BENQ XL2411T (Analog)
Screen Height: 1080
Screen Width: 1920
Status: OK
Name: Default Monitor
Video Processor: GeForce GTX 680
Manufacturer: NVIDIA
Video Architecture: VGA
DAC Type: Integrated RAMDAC
Memory Size: N/A
Memory Type: Unknown
Video Mode: 1920 x 1080 x 4294967296 colors
Current Refresh Rate: 60 Hz
Driver Version: 21.21.13.7595
Driver Date: 2016-11-16
Name: Default Monitor
Screen Height: NULL
Screen Width: NULL
Status: OK
Network
Product Name: Bigfoot Networks Killer Ethernet Controller
Service Name: BfEdge7x64
Manufacturer: Bigfoot Networks, Inc.
MAC Address: 00:19:03:05:84:A7
 
Other Device
Name: Corsair Gaming H1500 Headset
Manufacturer: Corsair
Status: OK
 
Name: Razer Naga Hex
Manufacturer: Razer Inc
Buttons: 0
Status: OK
Name: USB-enhet
Description: Enhanced (101- or 102-key)
Function Keys: 12
Status: OK
Product Name: Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
Manufacturer: INTEL
Protocol Supported: Universal Serial Bus
Status: OK
Product Name: Etron USB 3.0 Extensible Host Controller
Manufacturer: Etron Technology Inc.
Protocol Supported: Universal Serial Bus
Status: OK
Product Name: Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
Manufacturer: INTEL
Protocol Supported: Universal Serial Bus
Status: OK
Product Name: Etron USB 3.0 Extensible Host Controller
Manufacturer: Etron Technology Inc.
Protocol Supported: Universal Serial Bus
Status: OK
Hope that helps and looking forward to suggestions on how to solve this


My System SpecsSystem Spec
.
2 Weeks Ago   #2
Finn88

Windows 7 Ultimate x64
 
 

My problem was in the first place caused as far as I know by changin the Bios settings to default and to faultless. From what Iīve read by now it seems to be some kind of a HDD problem.
In discovered in my Bios settings IDE and I think that I read something about switching the value from IDE to AHCI.
I ran regedit and changed the data for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV to 0. nothing happened.

I also changed the data for msahci from 0 to 3 and for pciide from 3 to 0.
After that my pc crashed and I had to repair the startup.
When I looked into my bios settings again it was still IDE.
I believe that the error is in the BIOS settings but I really donīt have a clue of what to do in the BIOS settings. There are also two places where I discovered IDE one is the 3GSATA and the other one if I recollect correctly PCH SATA.
I have also run chkdsk as well as sfc/scannow, run an antivirus scan and defragmented the hard disc but none of this helped.
Anyway I attach the sfc document, maybe one of you is able to identify the problems that sfc couldnīt solve and how I can solve them. Iīve also made some pictures of my BIOS settings and hope that they may be of any help.

Looking forward to receiving suggestions on how to solve this problem.

Best

Finn


Attached Thumbnails
Windows startup and programs very slow and unstable after BSOD-img_0264-kopia.jpg   Windows startup and programs very slow and unstable after BSOD-img_0265-kopia.jpg   Windows startup and programs very slow and unstable after BSOD-img_0266-kopia.jpg   Windows startup and programs very slow and unstable after BSOD-img_0267.jpg   Windows startup and programs very slow and unstable after BSOD-img_0268.jpg  

Windows startup and programs very slow and unstable after BSOD-img_0269.jpg   Windows startup and programs very slow and unstable after BSOD-img_0270.jpg   Windows startup and programs very slow and unstable after BSOD-img_0271.jpg  
Attached Files
File Type: txt sfcdetails.txt (127.8 KB, 0 views)
My System SpecsSystem Spec
Reply

 Windows startup and programs very slow and unstable after BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
windows 7 slow, programs crash and slow startup
Hi, this is my first post and I am somewhat desperate if you could help it's highly appreciated also sorry about my english Well, the trouble began about 3 days ago, in the morning I turned on the PC, used it for a while to play and websurfing and then suspended it. Later that same day turned...
General Discussion
Laptop running very slow, too many startup programs?
Hello everyone, first of all I want to thank everyone very much for taking their time to help me and everyone else through these forums, I've received a lot of useful information and I truly appreciate it. I've recently been going on my computer more and noticed how slow it's been running. I've...
Performance & Maintenance
Extremely Slow Startup, Programs Not Responding
Hi, Everyone, Should be a relatively fast machine takes forever to start-up / load apps. For example, 9:10 from power on to loading Outlook. I've tried everything I could think of -- CCleaner, Malwarebytes, disk cleanup / optimization, sfc / scannow, pruning down any startup items, power set to...
Performance & Maintenance
My laptop starts off very slow despite having 4 programs at startup
Hi guys, ive been having this problem with my laptop for a long time now its an hp pavillion dv4-4068LA. I just restored my system because it was very slow despite having tuneup utilites 2013 working on disabling start up programs. Everything was great when i restored my system until i...
Performance & Maintenance
Extremley slow startup, multiple programs do not respond
So after the most recent update, the windows startup has been incredibly slow, and programs like malwarebytes and microsoft word constantly freeze up and stop responding. I've attached a CBS file, after running sfc /verifyonly I don't know what to do and could really use the help, thanks in...
General Discussion
Do Updater Programs Slow The Startup?
I have the following updaters on my startup Adobe Updater Startup Utility Google Update DivX Update If i disable them would it affect the startup speed at all? Also is ZoneAlarm Browser Security just a toolbar or is it something more useful?
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd

All times are GMT -5. The time now is 01:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App