Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Power question.

03 Dec 2009   #1
FuturDreamz

Windows 8 Pro (32-bit)
 
 
Power question.

So from what i can tell when your computer sleeps it uses less energy to get in and out of sleep mode but uses more power in sleep mode, while when you hibernate it takes more power to get in and out of hibernation mode but uses less power in hibernation mode.
Following that, at which point does the power used to get into and out of hibernation mode is more than just having the computer in sleep mode?
Or how would one calculate that?


My System SpecsSystem Spec
.
03 Dec 2009   #2
gregrocker

 

It uses enough power in sleep to keep your saved desktop in RAM.

At hibernation it writes the RAM to HD and shuts down cleanly, but for some reason can then startup faster. Plus all of your work is right where you left it on desktop.

The defaults are set perfectly, letting it sleep while you still may be working on it, then hibernating when you have likely left and now don't have to even think about turning it off or saving your work.

The power used to get into or out of hibernation is negligible when measured against no power use until next startup.
My System SpecsSystem Spec
03 Dec 2009   #3
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Buy a Kill-a-Watt device and do some real-life testing.
My System SpecsSystem Spec
.

03 Dec 2009   #4
Brink
Microsoft MVP

64-bit Windows 10 Pro
 
 

Hello IceFire,

I would say that if you frequently are on and off the computer during the day, then Sleep mode would be better for you. It uses only a tiniest bit more power than hibernate, but it will resume Windows 7 for you almost instantly.

If you are not off and on the computer often, then hibernate would save you more energy. Hibernate just does not resumes as fast as Sleep.

Without a power meter plugged inbetween your computer and the outlet measuring how much power is being used, I'm not sure how you would calculate it.

Hope this helps,
Shawn
My System SpecsSystem Spec
03 Dec 2009   #5
FuturDreamz

Windows 8 Pro (32-bit)
 
 

k thx
My System SpecsSystem Spec
03 Dec 2009   #6
Brink
Microsoft MVP

64-bit Windows 10 Pro
 
 

You're welcome.
My System SpecsSystem Spec
Reply

 Power question.




Thread Tools




Similar help and support threads
Thread Forum
Power supply question.
I'm building a Gaming rig for as cheap as possible. 150$ cpu - video card - 50$ mobo . I checked the Newegg power supply chart and it says I should get 450w. I can get a 80 certified 500w PSU for 40$ or a 600w non 80-cert psu for 30$. Newegg.com - Diablotek DA Series PSDA600 600W ATX12V...
General Discussion
Power cord question
Not sure if this is the right place to ask this. I just received my new HP computer today. The only problem with it is the wrong power cord. The adapter (brick like thing) plugs into the computer correctly, however the power cord from the adapter to the wall outlet is the wrong one (adapter has...
Hardware & Devices
Power Management Question
Hi There Should i be using APC"s battery backup software, or stick with Windows 7 built in battery management software? just curious and wondering on that
Performance & Maintenance
Power Question
I just had a quick question to ask everyone. What is the best way to take care of your laptop, but have it not running when not needed. In other words. Would it harm my computer if I were to turn it on for like half hour, hour, run somewhere, maybe half hour, hour, and turn it off...
General Discussion
USB power question
I have two PCs in my office: self-built mATX tower & HP TouchSmart IQ506. I also recently bought a WD My Passport Essential SE 1TB portable hd. Yesterday I plugged the new drive into the self-built pc. It didn't work. Tried the ports in the front of the case and those on the back. Then,...
Hardware & Devices
Power Supply Question
I just got a new 500 watt power supply. The old one was overheating. The new one has a switch for a normal fan or turbo fan. The temperature runs around 48 C most of the time but has spikes up to 70 C (I have a temperature monitor software). When I put it on Turbo the system stays nice and cool all...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App