Cannot see Windows 7 at boot now


  1. new
    Posts : 101
    windows 7 64 bit
       #1

    Cannot see Windows 7 at boot now


    I had XP on main drive and installed Windows 7 on partition. All was fine and at boot I had a choice of systems. However I had to run 'repair' on XP and now only XP is showing at boot, Is there a way of getting Windows 7 back as a boot choice without having to re-install. I am still able to see the Windows 7 Folders and Docs when I boot into XP. I tried Acronis OS selector but it didn't find Windows 7.
      My Computer


  2. Posts : 1,009
    Windows 7 RC 7100 32bit/64bit
       #2

    Hello New.

    You need to boot using your Windows 7 DVD and do a "Repair Computer -> Startup repair" when prompted.

    This will fix your problem. (You will have both options at startup)

    Hope it helps.
      My Computer


  3. new
    Posts : 101
    windows 7 64 bit
    Thread Starter
       #3

    Thanks, I read about this, but I cannot see a repair option in any of the folders that I have on the downloaded Windows 7 Beta that I turned into a DVD and used to install the system in the first place.
      My Computer


  4. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #4

    new said:
    Thanks, I read about this, but I cannot see a repair option in any of the folders that I have on the downloaded Windows 7 Beta that I turned into a DVD and used to install the system in the first place.
    hello new you have to boot from it and follow this System Recovery Options

    the after you get to that screen follow what limneos said...
      My Computer


  5. new
    Posts : 101
    windows 7 64 bit
    Thread Starter
       #5

    Sorry limness and darkassasin I did find the option to repair when I booted to the DVD, I had just been running the DVD in XP before and there was no repair option that way. I needed to run repair 4 times before it picked up Windows 7, however I have yet to see if I get the XP option at startup now as well as Windows 7. Thanks again to you both.
      My Computer


  6. new
    Posts : 101
    windows 7 64 bit
    Thread Starter
       #6

    Hi again, just tried a re-boot and I found that I boot straight into Windows 7 now with no option to boot to XP.
      My Computer


  7. Posts : 1,009
    Windows 7 RC 7100 32bit/64bit
       #7

    To restore the option for XP:

    1. Check My Computer to see if your XP partition is visible. If you can't see your XP partition, you need to assign a drive letter to your hidden XP partition. To do that, open Control Panel - Administrative Tools - Computer Management - Disk Management. Right click on the partition without a drive letter and select "Change drive letters and ...." and assign a drive letter , e.g. D:. If you already can see the XP partition , skip this step, just note its drive letter.

    2. Open an elevated command prompt (run as administrator) and type:


    Code:
     
    bcdedit /create {ntldr} /d "Windows XP"
     
    bcdedit /set {ntldr} device partition=D:
     
    bcdedit /set {ntldr} path \ntldr
     
    bcdedit /displayorder {ntldr} /addlast

    Note: Change D: above with the letter of your XP partition

    Reboot, and you should see Windows 7 and Windows XP as startup options.
      My Computer


  8. new
    Posts : 101
    windows 7 64 bit
    Thread Starter
       #8

    Thanks Limneos, however, what I did and what might work for others in this situation, was to download and install Easybcd, it put the problem right instantly.

    One thing though, could you explain 'elevated command prompt', I am the only user on my computer. I tried using the script you showed in a Command Point, but got access denied.
      My Computer


  9. Posts : 1,009
    Windows 7 RC 7100 32bit/64bit
       #9

    new said:
    Thanks Limneos, however, what I did and what might work for others in this situation, was to download and install Easybcd, it put the problem right instantly.

    One thing though, could you explain 'elevated command prompt', I am the only user on my computer. I tried using the script you showed in a Command Point, but got access denied.
    EasyBCD is a tool that easily does what I described above. You can do this either the manual way, or the EasyBCD way, no difference.

    Elevated command prompt is a command prompt that you have chosen to "Run as administrator". Unless you have turned off UAC, you still need to do that even if you are the only user and admin.

    See this Tutorial for more:
    Elevated Command Prompt
      My Computer


  10. new
    Posts : 101
    windows 7 64 bit
    Thread Starter
       #10

    Thanks again for your help. I will make notes of what you have told me for future use.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:18.
Find Us