Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Win7 x64 does not boot after changing SATA mode

18 Mar 2010   #21
Product FRED

Windows 7 Enterprise 64-bit

I've had some problems solved by themselves like that too before, it's weird stuff. Sometimes auto-recovery doesn't catch the problems the first time around, which is why someone suggested to run it 3 times. I'm surprised "fixboot" didn't fix it though.

My System SpecsSystem Spec
18 Mar 2010   #22

Windows 7 Ultimate 64Bit

Well , I`m glad you got it fixed.

Attached Thumbnails
Win7 x64 does not boot after changing SATA mode-rotate.jpg  
My System SpecsSystem Spec

 Win7 x64 does not boot after changing SATA mode

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
can't boot from cd/dvd sata drive/AHCI mode
Is it just plain not possible to boot from a CD/DVD drive that is set in BIOS as SATA/AHCI mode? I can acces the drive & read/write from it, it just won't boot to it. Yes I have CD/DVD drive set as 1st boot drive. I have "Googled" the earth & can't seem to find a straight answer to this. Can anyone...
Hardware & Devices
Changing from SATA RAID to SATA AHCI - Help needed!
I could really use some help with this. I have a HD that I'm moving from one Windows 7 machine to another. The new system is a Gateway DX4860. The old was was also a Gateway DX4820. When I put the old drive in the new computer, I get the Windows Splash screen, the stars begin to appear...
Hardware & Devices
Win7 SSD boot with ALL User,Data, & Programs on SATA HDD?
How do I set up a Win7 System with a SSD boot drive but with all USER,DATA,& PROGRAMS (INCL. GAMES) "AUTOMATICALLY" installing to, and run from, an internal SATA HARD DRIVE... that preferably is labeled "C" drive ------ or, get as close to that as possible?!
Hardware & Devices
AHCI mode no boot from sata optical drives
A strange problem, nothing critical, but I found it annoying that my optical sata drives will not boot from a bootable disk when in AHCI mode in Bios. If I switch the drive mode to native IDE then I can boot just fine from either of the Opitcal Sata drives. I have done some searching and found...
Hardware & Devices
Changing SATA from Compatibility mode to AHCI
Hi, back with another issue on a different computer. I'm installing Seven on a WinXP machine and completed the install, but forgot to change the SATA setting in the bios from "compatibility mode" to AHCI. Now when I change it, windows gives me bluescreen on boot. I'm dumbfounded that Windows...
Installation & Setup
win7 wont see sata even in ide mode
ok, do i need to install a sata driver if i'm tring to run my sata drive in native ide mode? right now i have the sata hdd in sata2_0 on the motherboard, the on chip sata controller enabled and set to native ide.( this is default) the bios sees the hdd, and its seen in post as ide device, but...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:35.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App