Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Power settings don't really change anything?

21 May 2010   #1
Drud

Windows 7
 
 
Power settings don't really change anything?

Hi. I had previously set my system to "Do nothing" when I physically press the power button, to avoid accidental manual shutdown. Well I was doing something and accidentaly pressed the button. The computer shutdown. I checked again under power settings, and the "Do nothing" option was indeed selected.

Any ideas?


My System SpecsSystem Spec
.

21 May 2010   #2
Bill2

Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
 
 

I think the Power settings option applies only to the Start menu power button, not to the keyboard/ Tower physical button. Try remapping the power key to something non-functional with Sharpkeys.

Map Any Key to Any Key on Windows 7 / XP / Vista - How-To Geek
My System SpecsSystem Spec
21 May 2010   #3
Dwarf

Windows 8.1 Pro RTM x64
 
 

Is this the keyboard button, or the one on the tower? If it is the one on the tower, then its function is usually set in the BIOS, and is typically either Instant Off or Power Off when held for 4 secs. I have mine set for the latter.
My System SpecsSystem Spec
.


21 May 2010   #4
Drud

Windows 7
 
 

Ahh... so it doesn't apply to the button on the tower... fair enough. how would I change the function through the BIOS?
-thanks
My System SpecsSystem Spec
21 May 2010   #5
HighTechGeek

 
 

To get to the BIOS, you usually have to press a function key (F1, F2, F10, etc.) or the Delete key within a few seconds after turning your system on. Sometimes the startup screen (before Windows even starts loading) will tell you which key to hit, but sometimes not. You just have to keep restarting and try different keys. You know you've missed your chance if you see the Windows loading animation. Just reboot and try a different key.

For example, it might state: "Press the DEL key to enter setup" or "Hit F1 to enter BIOS"...

Once in the BIOS, use the up & down arrow keys to move around the different choices. Sometimes the left and right arrows are used to view different tabs or pages. Look for something related to POWER. You usually hit the Enter key, the Space Bar, or the right arrow key to edit or toggle the values. And then you have to Exit and Save changes. The computer will restart. Make sure you don't change anything you don't know about, as it can render your computer un-bootable.

As Dwarf said, you can usually choose between Instant and 4 second Delay. If you set it to 4 seconds, then you would have to hold the power button in for 4 seconds before the PC would turn off.
My System SpecsSystem Spec
22 May 2010   #6
Drud

Windows 7
 
 

Great. Thank you very much!
My System SpecsSystem Spec
22 May 2010   #7
Dwarf

Windows 8.1 Pro RTM x64
 
 

In addition, the keyboard button might be able to be disabled, if this is supported by the keyboard driver. Note that this needs to be the specific driver for the keyboard, not the generic Microsoft one that is built in to Windows 7.
My System SpecsSystem Spec
Reply

 Power settings don't really change anything?




Thread Tools





Similar help and support threads
Thread Forum
Power Plan Settings - Change
How to Change Power Plan Settings in Windows 7 This will show you how to change the settings for the power plan that you have selected to reflect how you want your Windows 7 computer to manage power usage. Here's How: 1. Open the Start Menu, and type powercfg.cpl in the search...
Tutorials
Cannot see Multimedia Settings under "Change advanced power settings"
I have already clicked "Change settings that are currently available" but it still does not show it, restarted the PC and still same result. MSE disabled Windows 7 Starter 32-bit Power Plan: High Performance System Model: HP Mini 110-3500
General Discussion
change power settings based on location
Hi is there anyway to automatically switch power setting based on my location. Say if I'm connected to my home network be in high performance mode. Or perhaps a program that does this? If not does anyone know how I might go about creating one ( I'm a computer science student) thanks, Laurie
Performance & Maintenance
Unable to change Power settings
Hi, I have been having some issues changing the power settings on my Dell desktop running Windows 7 Ultimate. When i go into Control Panel and then into Power settings all i get is a little red circle with a x in it. Any ideas? Untitled | Flickr - Photo Sharing!
Performance & Maintenance
Script to change power settings
Greetings, I am attempting to temporarily disable hibernate and make sure the monitor doesn't go off while I am running a script to complete system configuration. control powercfg.cpl -monitor-timeout-ac 30 control powercfg.cpl -monitor-timeout-dc 30 control powercfg.cpl /hibernate off
Performance & Maintenance
Change power settings based on a schedule?
Say you want the computer automatically to go into Power Saver mode at night, High Performance during 9-5pm hours, and then Balanced at other times. Is there a way to do this? It might be doable using task scheduler and the powercfg command, but the main issue with that is if you computer is...
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App