Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Updates cannot run!

08 May 2009   #11
Luke14789

Windows 7 RTM (Build 7600)
 
 

I SOLVED IT.
All that needed to be done was execute this command
regsvr32 wuaueng.dll

My updates are back and running.
Whoever said there is no way to fix this, GG


My System SpecsSystem Spec
.

08 May 2009   #12
bobiii

Win 7 RC1
 
 

Make sure you activate your copy of windows before doing an update. Microsoft checks for valid copy of windows before doing some updates and this happened to me. After I validated my copy over the internet, the update started working the way it should.
My System SpecsSystem Spec
08 May 2009   #13
torrentg

7600.20510 x86
 
 

Well, seems like you've successfully found a way to install it back on your system. That's what I said need to be done OR there's no way to fix it. Maybe just a misunderstanding, but cool, glad you fixed it up.

Having it missing from the service list, it was obvious it needed to be put back there somehow heh.
My System SpecsSystem Spec
.


08 May 2009   #14
Luke14789

Windows 7 RTM (Build 7600)
 
 

oh yea, sorry if I came off kinda mean. The thought of reisntalling everything scared me and in reality all that needed to be done was execute that command.
5 second fix hehe
My System SpecsSystem Spec
08 May 2009   #15
Jacee
Microsoft MVP

Windows 7 Ultimate 32bit SP1
 
 

I'm just curious ... was this a clean install or did you do an upgrade from either XP or Vista?
My System SpecsSystem Spec
09 May 2009   #16
Luke14789

Windows 7 RTM (Build 7600)
 
 

Clean install
My System SpecsSystem Spec
09 Nov 2010   #17
kwfoo

Windows 7 Pro x64
 
 

Just like to share with others, I actually having the same problem in the first post, but my Windows Update & BITS services is running without any problem.

Also did a lot of search in the net and tested with a lot of ways (eg. clean up the Windows\SoftwareDistributor folder, re-register windows update services, manual install patch, windows trobleshooting, etc) with no help.

In Windowsupdate log, it show error as follow:
DtaStor FATAL: Failed to initialize datastore, error = 0xC8000247
Agent * WARNING: Online service registration/service ID resolution failed, hr=0xC8000247
DtaStor FATAL: Failed to initialize datastore, error = 0xC8000247
Agent * WARNING: Exit code = 0xC8000247


This problem can be simulated with a clean installation of Windows 7 Pro 64 bit with the hardware drivers.

After few days searching and testing, finally found the problem - it was cause by "Intel Rapid Storage Technology (RST)" where it enhancement SATA disk performance. After I downloaded and install the latest version of this driver, the problem solved.

I also read somewhere that some third party driver which can cause the Windows Update problem.

Hope this can bring some hints to other people who encounter the same problem. First try to make sure all drivers are the latest.
My System SpecsSystem Spec
13 Jun 2011   #18
mitchflorida

windows 7
 
 

"Intel Rapid Storage Technology (RST)" update fixed my problem thank you!
My System SpecsSystem Spec
Reply

 Windows Updates cannot run!




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 restore to updates, no boot, loop back to updates
Dell Latitude 2120. Windows 7 trying to restore at boot up, loads 18000+ updates then restores again in loop. Safe mode attemp restore lists OS C: as only selectable drive, operating drive is D: <DIR> lookup shows an apple update and delete april of 2013 appears to be when problem started.
Backup and Restore
Windows Updates Fails configuring updates and reverts back
EDIT: Please see my updated information a few posts down. Hello, I'm having issues on a Windows 7 64 bit system. If the updates install, then upon restart it fails configuration and reverts back. Otherwise the the updates will fail and I get the following when using the windows fix it for...
Windows Updates & Activation
Windows Check for updates keeps running-all installation/updates fail
I have never posted on a forum before so apologies if I am doing this wrong. The problem started when I tried to plug in my (new) iphone to my Dell pc. The device was not detected so I tried to update my itunes software - update failed and I received a Windows 7 error. After searching through...
Windows Updates & Activation
Windows wont complete updates, Security Updates KB2604121
Its been doing most of these updates forever, when I go to shut it down it updates but when I wake up in the morning these updates are still not done... It's like they never finish. This happens every night for the past 6 months or so i'm getting tired of it now so i need some help. I've tried...
Windows Updates & Activation
Windows 7 updates same for updates every time it checks for updates
For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install. I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of...
Windows Updates & Activation

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App