Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: My Kingston memory and Windows 7 compatibility

06 Jul 2010   #21

Windows 7 Home Premium 64 bit

Quote   Quote: Originally Posted by DeaconFrost View Post
Thank you for updating the specs. My advice from above still stands. You are well above the minimum and even the recommended specs. Windows 7 will run perfectly fine on your system.
How can you be sure that my motherboard is compatible with Windows 7?

And also my hard drives? I don't want to lost any data because of incompatibility issues.

My System SpecsSystem Spec
06 Jul 2010   #22

Windows 7 Ultimate x64 SP1

Quote   Quote: Originally Posted by rfe777 View Post
How can you be sure that my motherboard is compatible with Windows 7?
This is the part that has me confused. Have you ever heard of a motherboard that wasn't compatible with Windows 7? When you are finding out the compatibility of hardware with an OS, you simply make sure your core components are fast enough to handle it, based of the OS's minimum requirements. Then you worry about non-core devices, like printers, scanners, etc...and the software on the system.

Like I said several times have a fairly recent system. I'm honestly not sure why you are so worried about this. If you had an old P4 system...maybe, I could see wondering if it would run Windows 7 fast enough.

Did someone tell you that you might have an issue, and that has you spooked? I'm just guessing, but I'm wondering if that's why you keep question the parts that shouldn't need worrying about.
My System SpecsSystem Spec

 My Kingston memory and Windows 7 compatibility

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Memory Compatibility
I have two DIMMS of Corsair Vengeance 4GB RAM (2 x 2GB) at 1600MHz, although whenever I try to turn it up to this speed Windows BSODs during boot so I left it at 1333MHz, however I would like to add a DIMM of KomputerBay 8GB 1600MHz to my system but I'm sure the timings are different; the Corsair...
Hardware & Devices
Kingston USB Drive/memory stick - "No driver found"
Hi I just bought a USB drive (i.e. "memory stick") from Kingston. It works fine on my Windows XP computer, but on my Windows 7 Pro (x64) computer it is failing to work. It is showing up under Control Panel > System > Device Manager, where it appears under "other devices" with the name of...
Memory compatibility question
I just recently built a new computer, installed 16GB ram (two 8GB strips).... Crucial Ballistix 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model BLT8G3D1608DT1TX0 Newegg also sent me two memory strips.... Crucial Ballistix Sport 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3...
Hardware & Devices
Memory issue GA-790XT USB3 kingston Hyper x KHX1600C9D3K4 /16GX
Just purchased an upgrade memory pack for my Gigagyte GA-790XT USB3 Board. 16Gig (4X4) of KINGSTON HYPER X GENESIS KHX1600C9D3K4 /16GX. The previous memory was the same but (2x4 Gigs) Can't understand this but when fitted, i get no boot and a single beep code (Memory Error) Anybody got...
Hardware & Devices
Intermittent Fault With Kingston 100 G2 USB Memory Stick
Hello all, I have a Kingston 100 G2 USB memory stick (8GB - formatted with FAT32). I use this stick a lot, and is it a work USB. Just recently my home PC has not been wanting to play ball with it. This is what happens: - I plug my stick into ANY USB port on the PC - No automatic...
Hardware & Devices
Kingston HyperX T1 3GB & 6GB 2000MHz DDR3 Memory Review
Ten page review at source: Legit Reviews
Chillout Room

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:17.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App