Welcome to Seven Forums I found this driver for your LCD on the LG site scanned with MSEW1941.zip
LG Product Support for W1941S-PF# Unzip this file> and try to install using the w1941 setup information file. It's a Vista driver, if unsccessful you may have to go through device manager> monitor> update drive software> browse my computer>and direct it to where the file is located.
Installing the driver for you monitor usually will allow you to use it's native resolution. Fabe
I've Downloaded it but I don't know how to install it .Downloaded the manuals but no guides for installing the driver.I've tried doing wut thefabe's said but it says
Hi
Could you try redoing what the Fabe suggested under safe mode?
Regards
Hi
Sorry for the multiple posts.
Could you also post your system specs? Have you updated your motherboard/chipset drivers?
Regards
Monitor may not show up in device manager until a GPU driver has been installed.
I would try booting in Safe Mode, and run DriverSweeper (Check the ATI Box)
Re-boot and Re-Install the Nvidia Drivers.
From the Device manager, Expand Monitors, and choose Update Driver Software.
Then Choose Browse My Computer, and direct it to the Folder of Driver you just downloaded.
I can't Install the monitor during safemode because the monitor doesn't come out on the device manager.Should I uninstall it and reinstall the driver?
You downloaded the driver, right? You should be able to launch it like you would a normal program, like Word, and run it. The advice to go through device manager was meant to be used if you could not run the installer normally. You probably have about a 5% chance of it not working correctly.
Save the Zip file to your desktop>extract files>right click the last one of the 3 files and you should see an option to open or install in the open window>click on it. It's a setup .inf file I just Verified it. Fabe
Quote
