Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Generic Non-Pnp Monitor problem please help

02 Sep 2010   #21
aronaxmann

 
 

no i cant the 25Hz is the only one


My System SpecsSystem Spec
.

02 Sep 2010   #22
aronaxmann

 
 

picture


Attached Thumbnails
-fullscreen-capture-922010-50042-pm.bmp.jpg  
My System SpecsSystem Spec
02 Sep 2010   #23
Lomai

Win7 HP (x64)/Win7 Ultimate (x64)
 
 

Are you connected via DVI or VGA?
Could you try changing the connector depending on what you are using at present?

Regards
My System SpecsSystem Spec
.


02 Sep 2010   #24
aronaxmann

 
 

well i have a jack to VGA plug A-DVI-Vga if this is wat u asked
My System SpecsSystem Spec
02 Sep 2010   #25
Lomai

Win7 HP (x64)/Win7 Ultimate (x64)
 
 

Based on the photos you posted, it appears that you are using VGA - could you try changing that to a DVI connector?
Don't forget to power down
My System SpecsSystem Spec
02 Sep 2010   #26
aronaxmann

 
 

umm...my monitor does not have a Dvi vonectro i think it has only a blue headed cable
My System SpecsSystem Spec
02 Sep 2010   #27
Lomai

Win7 HP (x64)/Win7 Ultimate (x64)
 
 

Sorry about that
Have you tried changing the resolution via the Catalyst Control Centre icon in your system tray.
  1. Right-click CCC
  2. Desktops and Display Tab
  3. Select the triangle>Properties
  4. Set the required resolution and refresh rate from there
Let us know how things turn out

Regards
My System SpecsSystem Spec
02 Sep 2010   #28
aronaxmann

 
 

it does not let me change the refresh rate at 1920x1080


Attached Images
 
My System SpecsSystem Spec
02 Sep 2010   #29
aronaxmann

 
 

i think uh i dunno i really nead that edid file for my 21.5" monitor
My System SpecsSystem Spec
02 Sep 2010   #30
Lomai

Win7 HP (x64)/Win7 Ultimate (x64)
 
 

Hi

Open CCC>Go to Desktops and Displays>In the lower section where the small display icons (may depict your monitor) are located, click on the black triangle to get a dropdown menu;
Select Configure>Under the Color toggle:
Uncheck the box: Use Extended Display Identification Data [EDID] or driver defaults.

Once you uncheck that box, you should be able to select whatever options you want for Refresh Rates. BUT....it is at your own risk to do this. If your monitor does officially support the higher refresh rates, you should have no problems.

Keep us posted on your results - I'm gonna turn in, it's 3am
Take care and regards
My System SpecsSystem Spec
Reply

 Generic Non-Pnp Monitor problem please help




Thread Tools





Similar help and support threads
Thread Forum
What's a Generic PnP Monitor?
Hello, I recently purchased a new PC which I'm positive can run two monitors simultaneously. I currently have a monitor connected via DVI and a monitor connected via HMDI, they both are working but it shows the same screen on both monitors. I've tried to change the resolution on my monitors to...
Graphic Cards
Generic Non pnp Monitor Fix
So...like many others, my Windows 7 32bit system was working "fine" yesterday. I turned it on today to see that my 4 monitor configuation was out of order and the resolutions were all wrong. This was devastating! I panicked! I started surfing the web for fixes, installing updated drivers, reading...
Graphic Cards
What is generic pnp monitor
I have a HPE-500f pc hooked up to my vizio V551XVT and all that comes up is generic pnp monitor, is that the correct setting and if not how do I change it
Hardware & Devices
generic non pnp monitor/extended display problem
I have read this post: http://www.sevenforums.com/graphic-cards/108589-generic-non-pnp-monitor-problem-please-help-4.html and it seems similar to my problem but not quite the same. Before I proceed, I wanted to ask if the above solution will likely work for my problem. I have an hp pavilion...
Hardware & Devices
ViewSonic VX2450wm-LED monitor is a Generic Non-PnP Monitor
Greetings all, My ViewSonic VX2450wm-LED monitor is recognized as Generic Non-PnP Monitor. I even downloaded and attempted to install Viewsonic's "Standard_Monitor_Driver_Signed_Win7_x64". It times out at the end of installation and requests I download "Standard_Monitor_Driver_Signed" from...
Drivers
Generic PnP monitor!?
Sorry for posting another thread, but I am going to pull my hair out.... I upgraded to windows 7 and now this thing says that i have a Generic Pnp Monitor? and there is no 3d card listed in the Device Manager besides the Intell Mobile Chipset thing.... I Tried all of the older drivers and they...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App