Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: W7 Reverts back to Cloned display mode

20 Sep 2010   #1
duckboy81

W7
 
 
W7 Reverts back to Cloned display mode

Hey all,

I dont know how to describe this too well, so bare with me. Everytime a windows popup takes over my screen (like the UAC takeover, or the CTRL+ALT+DEL screen) my displays always revert to Cloned mode after the popup is finished.

I've tried the registry edit with changing the TMM value, but that has returned unsuccessful.

I'm using the windows 7 enterprise on a Fujitsu laptop with an internal Intel graphics card.

Thanks!


My System SpecsSystem Spec
.

21 Sep 2010   #2
JSCheung

Windows 7 Enterprise
 
 

I am having the exact same problems. Colorado Springs? I've searched for a patch, but to no avail.
My System SpecsSystem Spec
21 Sep 2010   #3
duckboy81

W7
 
 

Like a machine?
My System SpecsSystem Spec
.


21 Sep 2010   #4
JSCheung

Windows 7 Enterprise
 
 

2014!!
My System SpecsSystem Spec
21 Sep 2010   #5
JSCheung

Windows 7 Enterprise
 
 

I believe that it is a Windows 7 specific error. I've looked into the registry to see if there is a fix, but I'm not finding anything. However, there are specific programs which might fix the issue. I'm still looking into it.
My System SpecsSystem Spec
25 Sep 2010   #6
duckboy81

W7
 
 

Email I sent out:

If you have a second monitor connected to your dock (with a VGA connection) and it continually changes orientation (from extended desktop to clone or etc) whenever you login, type in your administrative password, ctrl alt del, or things of the like, I believe I found a solution:

1. Go to your Fujitsu Tablet Controls (Start -> Type: “Fujitsu Tablet Controls” OR press the BLUE Fn key, ON your laptop monitor, twice -> Select “Fujitsu Tablet Controls”)
2. Boom. Uncheck all four “Enable Un/Docked Notebook/Tablet Profile” buttons
3. Click Apply
4. Celebrate.
5. Now two step.
6. Then get jiggy with it.

If it doesn’t work…..well……it worked for me so I don’t know what to tell ya. Later.
My System SpecsSystem Spec
26 Sep 2010   #7
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Not entirely sure that this thread makes complete sense, however...

Update drivers?

~Lordbob
My System SpecsSystem Spec
Reply

 W7 Reverts back to Cloned display mode




Thread Tools





Similar help and support threads
Thread Forum
Windows reverts back to default setting
It seems that Windows has a mind of its own. There are two things I change on Windows but in a few days it goes back to the default settings. I do not like any system sound on my computer. It annoys me whenever I click on something I get the "beep". So I go into settings and change it to "NO...
Customization
Theme reverts back on it's own!
Ok this one is driving me nuts. In my themes window under 'my themes' I have my own theme that I use most of the time and somehow a split image of that theme titled 'unsaved theme' but with the screensaver turned OFF. I am not sure how this one got there but no matter how many times I switch...
Themes and Styles
Pagefile reverts back
Im trying to get the best virtual ram usage for my video editing system (WIN7 32BIT 4gB RAM) so I've taken the advice of some and switched the virtual ram over to another drive from that of C (boot) drive. The system recommends 5361mb and 3574mb is currently allocated. I've reset these values twice...
Performance & Maintenance
External monitor resolution reverts back to 800 x 600
How do I stop the screen resolution from reverting back to 800 x 600 when switching to external monitor? Intel(R) Graphics Media Accelerator Driver for Mobile thinks the optimal resolution is 800 x 600 when it's actually 1024 x 768. How do I make it see 1024 x 768 as the optimal resolution and make...
Graphic Cards
Screen resolution problem always reverts back to 1280X1024
Screen resolution problem always reverts back to 1280X1024 I am trying to set my desktop resolution to 1252x864 I found that if I restart my PC no problem happens. But if it was awaked from sleep or hibernation the resolution would revert back to 1280X1024. I tried other resolution such as...
Graphic Cards
power option reverts back to balanced on startup
I have tried to update my video driver, but that didn't do much. Also changed all my plans to default state. Any idea guys? This is for 64-bits Win7
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App