Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't get correct resolution when connecting PC to HDTV

21 Sep 2010   #1

Windows 7
 
 
Can't get correct resolution when connecting PC to HDTV

I connected a Windows 7 machine to my 1080p HDTV via VGA (temporary solution until I can get a digital cable).

However, I can't get a resolution better than 1400x1050. Anything more causes the screen to flicker and the screen is still vertically letterboxed.

It's likely not my GPU, but for argument's sake it's an onboard Intel 3150.

What can I do? Help appreciated.

My System SpecsSystem Spec
.

21 Sep 2010   #2

W7 Ulti/64, XP Pro/32
 
 

You said your using the VGA connect. Do you know what the TV's native res is?

I use a Sony Bravia, pc input, native res is 1360 X 768.
You might find that you will have to go into the TV's menu and make some choices.
I recently hooked up to new 52" Sony Bravias to this little itty bitty Zotac puter. One was VGA connect, one was HDMI connect. I first did the VGA, at first I could not get it to work, then I went into safe mode and got the proper Hertz and boom. Now, only 1/3 of screen was used.???? It was a res selected by the system as compatible?????? Went into TV's setting CHOSE the proper wide screen format and boom, 52"'s of 16:9 VGA. Now I cloned the TV with the HDMI TV. Same thing, had to go into TV's settings, select right thing and boom, 2 sony 52" being driven by same low end puter.

You will find that you need a VGA connect to get into bios as well. For some reason, HD signal does not allow you to see boot.
At one time I had 2 puters connected to my one Sony thru the various inputs. One puter was PC input, one was HDTV input with a crt connected to the VGA puter out.
I have trouble with HDTV inputs. Cloning can be problematical because system trys to match res's, vga and hdmi is pixels vs progressive scan. They do not playwell togather.

I realize that I'm not giving you an exact answer, but I'm just trying to relay my specific practical experience with my multiple monitor attemps.

Listing system specs would be helpful. Whats TV, whats vid card?

ps 1080p is not vga. Can your vid card do 1080p?
My System SpecsSystem Spec
Reply

 Can't get correct resolution when connecting PC to HDTV




Thread Tools



Similar help and support threads for2: Can't get correct resolution when connecting PC to HDTV
Thread Forum
PNY 8800GT - Connecting to HDTV (DVI --> HDMI) Hardware & Devices
Connecting a laptop to a HDTV Hardware & Devices
Dual Monitor (Monitor+HDTV) Setup, HDTV Resolution Problem Media Center
Connecting to HDTV via HDMI Graphic Cards
How Do I Get The Correct Resolution For Videos in WMP? Music, Pictures & Video
Connecting my Computer to my HDTV Graphic Cards
SONY LCD TV correct resolution Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:33 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33