Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Widescreen on 1024x768 resolution

26 Sep 2010   #1
Moomo

Windows 7 Professional x32
 
 
Widescreen on 1024x768 resolution

Some time ago, I purchased a Sharp XR-32X DLP with nativ resolution 1024x768.
I also built my own screen but decided to make it in 16:9 format, since most movies are in this standard.

Now to the problem:
Is there a way to limit the desktop to 16:9?

I don't want to change the resolution to 1024x576 since this is not supported by the projector, i only would like to limit the desktop to this resolution.
I also don't want the projector to streach the image, since this distorts the image maging circles oval etc.

This would mean having black stripes both over and under the picture which is fine!

Thankful for tips...


My System SpecsSystem Spec
.

26 Sep 2010   #2
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Are you running in cloned? If so, then no.

If you run extended, then just set the monitors individually.

~Lordbob
My System SpecsSystem Spec
Reply

 Widescreen on 1024x768 resolution




Thread Tools





Similar help and support threads
Thread Forum
Can't get higher resolution than 1024x768
I just bought a laptop from a friend and I'm stupid so I don't know shit, but I know that the resolution should definitely get bigger than 1024x768. What is wrong, do I need new drivers or something? Windows 7 Ultimate 32bit.
Graphic Cards
Screen resolution problem (1024x768)
Well i recently installed windows 7 proffesional and had 1 problem with my screen resolution. After the instalation, my desketop resolution (1024x768) was looking like this :cry: ..... And when i lower the resolution (640x480), the entire computer desktop ,icons were huge without the bad...
Graphic Cards
1024x768 max resolution with Intel GMA driver
I've had this driver running on all 6 of the Dell laptops I've had over the years, and never seen this. I just had the screen die on this laptop, so I've plugged in a monitor. But the only two resolution options are 800x600 and 1024x768. I've reinstalled the Intel driver a few times, and while...
Graphic Cards
Screen Resolution for Widescreen
I bought this new laptop, it's a 15.2" widescreen, but the highest resolution I can choose is 1024x768... I thought it was the graphics card drivers issue, but at Device Manager it says "Windows determined your driver is up to date". I've installed all windows update and now I'm stuck. Everything...
Graphic Cards
2nd monitor max resolution at 1024x768
So I recently just hooked up a 2nd monitor to my computer just to play with it. Unfortunately, it will not go above 1024x768. I would like to set it to 1280x1024. The monitor is a Digimate DGL20, it's an LCD that was made back in 2005. The screen's max resolution might be set to 1024x768, but if...
Graphic Cards
1024X768 resolution leave a gap!
For reasons due to health and sight I like to use 1024x768 and not 1280x1024 on my 19"lcd monitor. If I set it to 1024x768 then there is a gap top and bottom of the screen that cannot be moved. In Windows XP I can set it to 1024x768 and there is no gap. I reckon it must be driver issues in...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App