computer not starting?


  1. Posts : 14
    Windows 7 7100
       #1

    computer not starting?


    hey, well i opened up my computer and put the GeForce 6200a AGP card in and closed it shut, then my computer wasnt turning on when i tried to turn it on. so i took the card out and tried starting it again but it still wouldnt turn on. On the back of the computer (where you plug in the power cable) theres a green light thats blinking. Not sure if that has something to do with it?
      My Computer


  2. Posts : 6,305
    Windows 7 Ultimate x64
       #2

    You could try unplugging the main power cable, installing the card then plugging back in & turning on. I kno in the past some cards couldn't be installed even with the power cable in.

    Hope this helps :)




    Jeff
      My Computer


  3. Posts : 31,242
    Windows 11 Pro x64 [Latest Release and Release Preview]
       #3

    Hi swordmaster,

    What I would suggest is that you re-open the case and carefully check all the cables going to the motherboard, Even to the stage of carefully dis-connecting and re-connecting at both ends if needed. do this one cable at a time and be sure you know where a cable plugs in before removing it.

    Quite often when working to fit a new component it's possible to knock another totally un-related lead, and thus cause a failure to boot
      My Computers


  4. Posts : 14
    Windows 7 7100
    Thread Starter
       #4

    Orbital Shark said:
    You could try unplugging the main power cable, installing the card then plugging back in & turning on. I kno in the past some cards couldn't be installed even with the power cable in.

    Hope this helps :)




    Jeff

    well i originally did install it with the power cable unplugged, but i just tried installing it while it was unplugged again, that didnt work so i tried installing it while it was plugged in, that didnt work either.


    Barman58 said:
    Hi swordmaster,

    What I would suggest is that you re-open the case and carefully check all the cables going to the motherboard, Even to the stage of carefully dis-connecting and re-connecting at both ends if needed. do this one cable at a time and be sure you know where a cable plugs in before removing it.

    Quite often when working to fit a new component it's possible to knock another totally un-related lead, and thus cause a failure to boot

    ive checked, and it seems like everything is connected


    with the green blinking light, right when i plug in the cord it starts blinking, and im positive it use to just stay lit
      My Computer


  5. Posts : 31,242
    Windows 11 Pro x64 [Latest Release and Release Preview]
       #5

    Ok Not sure if you have tried the steps in the following link.

    The link is to the PSU testing process for your PC model and should allow you to diagnose and hopefully solve your issue ...


    Troubleshooting Power Supply Issues
      My Computers


  6. Posts : 14
    Windows 7 7100
    Thread Starter
       #6

    hmm well i just tried those steps and it still keeps blinking, could it be my power supply blew or something while i tried to run my computer with the new graphics card?
    inside the computer it says the power supply is: 250W Max

    also.. the green blinking light makes a "ticking noise" if you listen to it
      My Computer


  7. Posts : 31,242
    Windows 11 Pro x64 [Latest Release and Release Preview]
       #7

    Hi,

    It does sound as if you may have blown something when you fitted the card and powered up

    The only real way to confirm this would be to get the PSU onto a test rig, or to check the outputs with a multimeter ( this is not straightforward as the test has to be done with the unit under load to give an accurate reading).

    The other way would be to replace the unit with one known to be working, not often an option for the home user, but in these days of multiple PC's in families is sometimes possible.

    If you do borrow a unit to check make sure you test it without the new card fitted just in case there is a fault with that card which caused the unit to fail .

    I would suggest that you get the unit checked out by a local professional if you want to be sure before looking to replace it.
      My Computers


  8. Posts : 14
    Windows 7 7100
    Thread Starter
       #8

    thanks, i guess ill try and go to geek squad at best buy and see if they can tell if its the power supply
      My Computer


  9. Posts : 31,242
    Windows 11 Pro x64 [Latest Release and Release Preview]
       #9

    Have no personal experience of Geek squad, (wrong Country), but would always try to find someone to check this type of thing that does not have an interest in selling you a replacement, or a link to someone who does.

    It's always useful if you can find an independent technician in your local area that others can vouch for.

    Just my opinion, of course
      My Computers


  10. Posts : 14
    Windows 7 7100
    Thread Starter
       #10

    just upgraded from a 250W to a 500W PSU and installed my new GeForce 6200a graphics card, everything works fine =)
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:59.
Find Us