New
#11
One straight on please.
P.S. If it is warping, it isn't the fan that is warping but the card itself.
One straight on please.
P.S. If it is warping, it isn't the fan that is warping but the card itself.
Could it be a slight misalignment of your motherboard relative to the case? Try loosening the motherboard mounting screws and then insert the card. When installed, retighten the screws.
I dont think so, the machining on this case is really high end and very precise. Its an Origen and is all aluminum, model is X11 Home Theater PC.
Perhaps when I'm tightening down the mounting screw for the graphics card to the PCI slot on the back it does seem to move/tilt the card if tightened all the way
Looking at the image of your system, I would say that a bit of cable management would be beneficial. Your main ATX power cable is running straight across the board, and I see that you have a 20-24 pin extension fitted. Unfortunately, the connector is right next to the graphics slot. Could this be interfering with the fan on the graphics card?
The cables arent long enough to do any good cable management, trust me I tried. theres a lot going on in there... 3 HDD's, 2 video cards, 8g of ram, dvd, 27 card slot etc
Nothing is disconnected, everything is good.
The fan will face left towards the other graphics card, so no, the cables are on the other side of it.