Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Extended desktop problem, monitor won't boot!

08 Oct 2010   #1
Quintox

Windows7 Professional x64
 
 
Extended desktop problem, monitor won't boot!

Hello,
First of all, I highly appreciate any help I can get through these forums. My problem is so stressful that anything would be good atm.

Ok, so my problem:

I can't get extended desktop to work since I have Windows7. It allways worked flawlessly on windowsXP pro and I used it on windows7 aswell for a little while.
But all of the sudden my second monitor won't boot from hibernation correctly anymore.
When I turn on extended desktop, my second monitor will boot and everything seems to be working perfectly, but unfortunately this only lasts for a couple of seconds before the monitor goes to black again. Windows still sees it as a working monitor and I can drag stuff on that screen.

There's a huge list what i've tried allready:

- Changing monitors and cables ( tried 3 ).
- Dual-link and single-link DVI connectors.
- Updating ATI drivers from 9.7 up till 10.9 ( current )
- Format windows 7
- Checking resolution and hertz
- Replacing the PSU ( old one died, new psu has 200Watt more and runs on 700 and should be enough )

From this point on I contacted a Club3D tech:
- Bios flash to latest version
- Motherboard chipset drivers updated
- Clear CMOS

The Club3D tech analysed the problem and thought it was a timing issue in the graphics card and told me to send it in for repairs.

The card has been tested on:

Benchmarks: 3dmark06 2560x1600, 3dmark vantage 2560x1600.
Monitors: native DVI Dual link monitor 2560x1600, Native D-sub monitor 1280x1024, Native Single link monitor 1920x1080.

OS: Windows XP SP3, Windows 7 Ultimate.

Drivers: ATI Catalyst 10.5, ATI Catalyst 10.8.

Result:
Card was working properly, no defects found by Club3D.

Bad decission:
So then I thought, well.. it has to be my motherboard. And I was so certain about that, that I bought a new motherboard and a second graphics card aswell ( for crossfire purposes ) but I installed the new hardware today and when I booted windows I got disappointed with the same boring old extended desktop problems. I realy hoped buying the new motherboard would solve the problem

Conclusion:
So I now know it aint my graphics card, it aint my motherboard, the screens work fine, the dvi connections work fine.. i've tested and tried everything I know that can be tested. Only items that haven't been tested or replaced are the memory banks and the CPU.. I mean.. what else can cause these problems?

I realy have no idea what to do anymore, i'm stuck and I need help desperately! I've allready spend 200 bucks on hardware that didn't even solve the problem!

Movie made with phone to show what the screen does:

MEGAUPLOAD - The leading online storage and file delivery service


What did I miss? What can cause dual-screen boot issues? Everything else works perfectly fine, except for multi-screening.


Many many thanks in advance for anyone who can assist me!


My System SpecsSystem Spec
.
08 Oct 2010   #2
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Wow, nice write up.

Did you try the monitor with another computer?

~Lordbob
My System SpecsSystem Spec
08 Oct 2010   #3
Quintox

Windows7 Professional x64
 
 

Thanks for the super fast reply!

Well, all screens work perfectly when they run as the main monitor. All 3 fail as soon as you try to run them as the second extended monitor. So the most logical thing to think would be bad drivers or a broken videocard.. but this has all been tested and it seems that it's not the problem.

Also something that used to help was, turning the second monitor on/off untill it stayed on. This could take up to 40min, but eventually the screen would stay on and work.. nowadays ( 2 months after ) even this doesn't work anymore. Again, makes you think it's graphic card related but this is 100% impossible and it has to be caused by something else.

Do you think this can be caused by the CPU or RAM? That is the only thing untested, tho I wouldn't know why the CPU or RAM would have anything to do with display issues.
My System SpecsSystem Spec
.

08 Oct 2010   #4
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

It might be that the new drivers (for W7) do not support 3 monitors...

~Lordbob
My System SpecsSystem Spec
08 Oct 2010   #5
Quintox

Windows7 Professional x64
 
 

Oh no sorry, you misunderstood. I tried 3 different monitors to work as the second monitor, I don't actually work with a 3 monitor setup. Just to show that it aint the monitor being faulty
My System SpecsSystem Spec
08 Oct 2010   #6
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Quote   Quote: Originally Posted by Quintox View Post
Oh no sorry, you misunderstood. I tried 3 different monitors to work as the second monitor, I don't actually work with a 3 monitor setup. Just to show that it aint the monitor being faulty
Ah, ok.

Does the second port work ok with just 1 monitor?

~Lordbob
My System SpecsSystem Spec
08 Oct 2010   #7
Quintox

Windows7 Professional x64
 
 

Card has been send back to Club3D, tested in several systems, on several monitors etc etc without any problems. Also, i'm running on Crossfire now and my main graphics card is the new XFX HD4870 and not my older Club3D HD4870 card. So unless the test results of Club3d are faulty and both graphic cards are broken I highly doubt that's the reason
My System SpecsSystem Spec
08 Oct 2010   #8
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Just checking.

Now, I am a little unclear. You are using the card with the problem right now, correct? And you are running it in crossfire?

~Lordbob
My System SpecsSystem Spec
08 Oct 2010   #9
Quintox

Windows7 Professional x64
 
 

The card doesn't have any problems, it has been tested by Club3D technicians in multiple test setups. Problem is caused by something unrelated to the graphics card.
My System SpecsSystem Spec
08 Oct 2010   #10
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Quote   Quote: Originally Posted by Quintox View Post
The card doesn't have any problems, it has been tested by Club3D technicians in multiple test setups. Problem is caused by something unrelated to the graphics card.
Ok, so this problem occurs regardless of the graphics card? Have you tested it with another card?

~Lordbob
My System SpecsSystem Spec
Reply

 Extended desktop problem, monitor won't boot!




Thread Tools




Similar help and support threads
Thread Forum
Extended desktop problem coming out of sleep
I have an Acer Aspire 5732Z as my main monitor with a Philips 19PFL3504D TV as the second monitor. My problem is when I wake the laptop from sleep the Philips says "Format Not Supported". The only way to get a display is to unplug the vga cable and replug it. Then my laptop auto arranges all...
Graphic Cards
Dual monitor extended desktop wallpaper display issue
I'm having problems with my wallpapers intended to span the length of both monitors.... My main display is on the right instead of the left and when i use a wallpaper that spans both screens it starts on the main display on the right and spans to the left screen instead of starting on the left...
Customization
2nd 2nd monitor broke but cant disabale extended desktop
I worked with 2 monitor displays attached to my PC extending the desktop view across both, but one of them has broke, now only using one display I have an annoying issue that my desktop workspace still appears to be extended, and as such certain pop ups from programs I use are still appearing in...
Graphic Cards
USB Tablet and Extended Desktop - Swap Monitor
I have a Genius GPen 4500 USB graphics tablet (using the built-in Windows 7 driver), and would like to use it on my secondary monitor (which is 4:3, unlike my primary which is 16:9) However, windows seems to have decided that the tablet is integrated into my primary monitor (according to "Tablet...
Hardware & Devices
generic non pnp monitor/extended display problem
I have read this post: http://www.sevenforums.com/graphic-cards/108589-generic-non-pnp-monitor-problem-please-help-4.html and it seems similar to my problem but not quite the same. Before I proceed, I wanted to ask if the above solution will likely work for my problem. I have an hp pavilion...
Hardware & Devices
Extended Desktop wth Dell 2001FP Monitor
I've just upgraded to W7 with few problems. However I use an extended desktop with 2 monitors (Viewsonic - digital and Dell 2001FP - analog). The Dell is the second monitor and the desktop extended on it ok with Vista. However with W7 only part of the desktop is visible, the rest is off the...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App