Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: My 10" touchscreen wount work with 7

27 Nov 2010   #11
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

NVIDIA DRIVERS 260.99 WHQL


My System SpecsSystem Spec
.
27 Nov 2010   #12
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

Q. Monitor Out of Range What is this?
A. It means your system display card settings are too high for your monitor. Boot your system into safe mode and set the display settings lower

http://support.microsoft.com/kb/315614
My System SpecsSystem Spec
27 Nov 2010   #13
Plecto

Windows 7 Ultimate 64bit
 
 

Thanks Safe mode did the trick. So what kind of setting do I have to change in order to make it work without safe mode? The refresh rate is set to 60hz, there is no other options in the list.
My System SpecsSystem Spec
.

27 Nov 2010   #14
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

that should of changed it for normal run ?
My System SpecsSystem Spec
27 Nov 2010   #15
Plecto

Windows 7 Ultimate 64bit
 
 

Quote:
that should of changed it for normal run ?
What do you mean?
My System SpecsSystem Spec
27 Nov 2010   #16
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

have you run it out of safe mode since the changed settings?
My System SpecsSystem Spec
27 Nov 2010   #17
Plecto

Windows 7 Ultimate 64bit
 
 

Well, I havent changed any settings. I just ran the computer in safe mode, successfully tested the screen and then booted it back up in normal mode. But the screen dosn't work now either after I booted it back up.
My System SpecsSystem Spec
27 Nov 2010   #18
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

go back to safe mode and change the screen settings Change screen resolution
My System SpecsSystem Spec
27 Nov 2010   #19
Plecto

Windows 7 Ultimate 64bit
 
 

Couldnt I just change the resolution in normal mode? I have tried that by the way, no resolution seem to work.
My System SpecsSystem Spec
27 Nov 2010   #20
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

well in safe mode i just realized it uses the on-board graphics not the card it must be the card settings. in normal desktop can you right click on the screen and in the context menu has it got settings for the nvidia card?
My System SpecsSystem Spec
Reply

 My 10" touchscreen wount work with 7




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Folder for "Videos" library won't work on same drive as "Recorded TV"
Interesting discovery. W7 Pro x64. I was copying content from my desktop PC to my laptop in anticipation of an upcoming weekend trip. The content consists of both (a) entire recent copy-freely WTV recordings, and (b) MPEG videos (actually previously edited from copy-freely WTV recordings using...
Media Center
"Arrange By" anything but "Folder" won't work... How do I fix???
I am trying to rebuild by search index because my computer won't let me arrange items using the "Arrange By" option... However, when I try and load my indexing options to rebuild the index it will sit there and say "Waiting to receive indexing status". If I click the "Advanced" button it will...
General Discussion
stuck on "welcome" screen cant get "sfc /scannow" to work
Hi everyone. All my experience is with XP, but my partners windows 7 laptop has this problem and I am stuck. it is a Dell laptop latitude E4300 about 4G ram, no external devices fitted. Laptop starts to boot, I log in, "welcome" screen comes up but never finishes processing. Harddrive light...
BSOD Help and Support
Touchscreen and TV problem
Hi there all! This is starting to p*** me off properly. Microsoft support couldn't help either. I have a mediacenter with a touchscreen connected to it via analog and a TV connected through HDMI. Problem is when i want to navigate through the touchscreen, the pointer jumps over to the TV...
Graphic Cards
HP Touchscreen Help
I've got an HP tx2120 series laptop w/ Wacom digitizer. When I installed 7 yesterday, my touchscreen no longer works. The digitizer works fine, but the ability to tap my finger on the screen no longer exists. I've visited the Microsoft Catalog Update and downloaded a driver, but I don't know what...
Drivers
Windows 7 lcd/touchscreen?
this is my first question, i hope it's in the right place in the forum!! On you tube there is a video showing photographs being manipulated/resized/moved by touching an LCD screen. Is this a specialist LCD screen? How does this element of Windows 7 work on normal LCD monitors? Does...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App