Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Issues with Matrox

23 Jun 2009   #1
scratch

Windows 7
 
 
Issues with Matrox

I have acquired a Matrox TripleHead2go digital edition. The problem is that I cant get the damn thing to work properly. I have updated the Matrox softare drivers and the Matrox compatibility tool states all is well and there should be no problems. I get about four screens on three monitors and all is pushed up to one side. Anyone got any ideas?

The pc is a Q6600, 4Gb ram and a 9800 GT craphics card with Win 7 32bit RC.

Works fine with another of my pc's running Vista though, so I know it works.

Scratch


My System SpecsSystem Spec
.
21 Aug 2009   #2
Yourmaster27

Vista 64
 
 

Could be a standard matrox issue, not windows. I'd try running the setup wizard again and double check to ensure everything is as it should. I had a similar issue on my vista machine and that fixed did it.
My System SpecsSystem Spec
Reply

 Issues with Matrox




Thread Tools




Similar help and support threads
Thread Forum
no driver for Matrox Millenium P650 AGP ?
hello folks, I had bought the Matrox yars ago when I got my WindowsXP. The Millenium P650 was a very good graphic at that time. In fact, for my purposes, it still is. Now that XP is over, I would like to change my system to Windows 7-32bit (RAM is 2GB, processor speed is 2x3GHz - so no problem...
Graphic Cards
Two Matrox Parhelia AGP+PCI Windows 7
I've got two different graphic cards installed on my ASUS P4C800E-Deluxe. 1 Parhelia 256MB AGP and 1 on PCI. I've also 3 Philips 22" monitors connected: 2 on the PCI graphic card and 1 on the AGP. On Windows XP I can extend the desktop on all the 3 monitors. Windows 7 (ultimate) detect the...
Graphic Cards
Win7 driver for Matrox P650 GCard PCI
Hi I have a Matrox Millenium P650 PCI 128mb GCard. Matrox does not support the card for Win7 drivers. The card worked on Win XP but cannot work on Win7. Any suggestions? Thx in advance
Graphic Cards
Matrox Millennium 2MB PCI Card in Aero Basic?
Does anyone know if this card will work in Windows 7? Thanks!
Graphic Cards
Matrox P690 PCIex16
Hi, I have a problem installing the driver for "Matrox P690 PCIex16" on a Win7 Enterprise (august definitive version) 64bit. The Windows Update does not offer the driver for it. I have downloaded the Vista64bit driver from the matrox web page but at installation time I get an error message....
Graphic Cards
Can't uninstall old Matrox driver after Win 7 upgrade
I have a Matrox M9120 PCIe x16 graphics card. It was running fine in Vista x64 with the 1.0.3.35 driver. I ran the Windows 7 x64 upgrade, and everything seemed to be OK until I discovered that I couldn't open Windows Media Center or view DVDs or other videos. I tried to upgrade to the latest Matrox...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App