Random crashing in every 30 mins in Nvidia 220GT


  1. Posts : 6
    Windows 7 ultimate x32
       #1

    Random crashing in every 30 mins in Nvidia 220GT


    Please help me, my computer is crashing/freezing in every 30 mins and when it froze I dont have any other option just to restart my computer, sometimes it crashes and when it crashes I see the notification that says "nvidia kernel mode not responding and has recovered" please help me I'm experiencing this since last month i purchased this card by the way my card is called PALIT 220GT 1gb HDMI/DVI/VGA a help would be appreciated thank you!
      My Computer


  2. Posts : 17,796
    Windows 10, Home Clean Install
       #2

    Welcome

    Here are my solutions to freezing, and an excellent article, which I hope is of some help
    Go to search type device manager and look for any yellow warning markers
    Download and run malwarebytes, a full scan after you update
    Run antivirus scan
    Check memory with memtest86
    Make sure that you are not over heating.
    Try in safe mode; report back if it works properly.
    Try a clean boot
    Make sure PSU is working properly
    If overclocking, restore to original
    Test hard drive at company website.
    Test in safe mode, does it still happen?
    Try with clean boot..
    http://support.microsoft.com/kb/929135
    http://support.microsoft.com/kb/929135
    http://malwarebytes.org/
    http://www.almico.com/speedfan.php
    http://www.geekstogo.com/forum/topic...ing-memtest86/
    http://ezinearticles.com/?Troublesho...blems&id=39981
      My Computer


  3. Posts : 6
    Windows 7 ultimate x32
    Thread Starter
       #3

    Thank you for the quick reply I'll definitely try the clean boot cause It's the only thing on your list that I didn't done before.
      My Computer


  4. Posts : 1,114
    Windows 7 Home Premium 64 bit
       #4

    When you changed graphic cards did you out the drivers before you put the new card in, i would try outing the drivers and go to Nvidia and get the latest driver and install them.
      My Computer


  5. Posts : 6
    Windows 7 ultimate x32
    Thread Starter
       #5

    I've already installed the latest driver, but I've already put the video card when I installed it. I'll try outing the card and re-install the driver, since my motherboard is on board card.
      My Computer


  6. Posts : 1,114
    Windows 7 Home Premium 64 bit
       #6

    ronnel990 said:
    I've already installed the latest driver, but I've already put the video card when I installed it. I'll try outing the card and re-install the driver, since my motherboard is on board card.
    Please clarify the statement (my motherboard is onboard card) are you saying you have onboard video and a video card, if so you need to turn off the onboard video before you install the video card, you can't run them both at the same time.
      My Computer


  7. Posts : 6
    Windows 7 ultimate x32
    Thread Starter
       #7

    Sorry my bad, I mean that my motherboard has an on board attached video card that can be used when you have no video card, but my vga port is connected to my 220GT not on the board card.
      My Computer


  8. Posts : 6
    Windows 7 ultimate x32
    Thread Starter
       #8

    Here's more info to my problem


    Description
    A problem with your video hardware caused Windows to stop working correctly.

    Problem signature
    Problem Event Name: LiveKernelEvent
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033

    Extra information about the problem
    BCCode: 117
    BCP1: 853E5510
    BCP2: 9015CAE0
    BCP3: 00000000
    BCP4: 00000000
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:55.
Find Us