Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No Input on monitor

30 Jul 2011   #1
cherokee007

vista
 
 
No Input on monitor

HI,I have an hp a6403w Intel m board .I keep getting no input screen
on monitor.So far i have put in a new video card... no help.
New power cord no help.tonight i bought new 750 watt power
supply no help.I have pulled out memory chips powered cpu on
get beeps put back in no help.I have tried onboard video no help.
I have tried to pull out power cord holding power button on for 60 sec
plug back in. you guessed no go. all lights come on cpuprocessor fan are working
ovideo card fan runs. Im stumped guys any help is appreciated.


My System SpecsSystem Spec
31 Jul 2011   #2
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

It sounds as though the monitor itself may be the problem.

Do you have access to another computer that you can connect the monitor to?

Have you checked that the video lead doesn't have any bent pins and is securely connected?

If the monitor proves to be alright then you need to consider whether it's the motherboard at fault as you say you've tried another graphics card.

You could check your memory sticks are seated firmly and that there's no dust laying in the case.
My System SpecsSystem Spec
01 Aug 2011   #3
Liam

Windows 7 Professional x64
 
 

This once happened to me when I switched CPU's over on my motherboard.
All I did was switch them back and it worked like a charm.
My System SpecsSystem Spec
01 Aug 2011   #4
cherokee007

vista
 
 

thanks for the reply.. I have tried the monitor on another cpu and lifted out the memory chips
The monitor works chips didnt change any thing.Whats left a power button and new motherboard?
My System SpecsSystem Spec
Reply

 No Input on monitor




Thread Tools





Similar help and support threads
Thread Forum
Input not support. Yet I can use the monitor
Hello, I have connected my Acer AL1717 monitor to my computer and this happened... http://www.betaarchive.com/imageupload/2014-02/1391264344.or.83484.JPGhttp://www.betaarchive.com/imageupload/2014-02/1391264360.or.42511.JPG PS: Sorry for awful quality If you require more details, just ask :)
Graphic Cards
AVI works, DVI no input to monitor. Troubleshooting?
I have four monitors supplied by two identical Nvidia Geforce 210 graphics cards. I don't always have all four switched on, it depends what software I'm running as to whether I need them all or not. Recently one of my monitors, a 1920x1200 Iiyama 2607 has started giving me problems as it wouldn't...
Graphic Cards
HDMI Input: No Input Signal -- Monitor Going to Sleep
Windows automatically updated last night before shutting down. When I turned on the computer this morning, the HP w2207h monitor was not functioning properly. Each time I rebooted, I received the message "HDMI Input: No Input Signal" before the monitor went to sleep. I do not believe it is a...
Graphic Cards
XFX HD 6770 and Acer Monitor on DVI - Input not supported.
OK, so I just did a major upgrade to my computer. New CPU, motherboard, ram, and graphics card. Everything is working great except my acer AL1916W monitor. I have it plugged in to the DVI port on my new XFX HD 6770, but the only resolution I can get working is 640x480 (actually, if I use the AMD...
Graphic Cards
Monitor issues; acer input not recgoginsed. plz help!!
hi i recently upgraded my parents old machine to windows 7. the model is an ACER aspire t300. now the issues arose when i found that most of the drivers for this platform are XP compatible only! this wasn't much of an issue until i started the install. the monitor cut out and displayed input not...
Graphic Cards
HDMI Input not filling monitor in applications
I've just built a new computer with Windows 7 and a gigabyte brand radeon HD4890 and have been having the same issue as some other users with regard to the over/underscan. I managed to correct the inch or so of unfilled space when displaying the desktop by using the under/overscan utility in CCC...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App