Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: LCD screen won't work with HD cable on Nvidia 7300GS

18 Sep 2011   #1
Sinobiah

Windows 7 Ultimate 32 bit 6.1.7600 build 7600
 
 
LCD screen won't work with HD cable on Nvidia 7300GS

Hi there all,

I have a Nvidia 7300 GS graphics card, and the drivers were installed etc. I was using it with the white plug cable for HD/DVI for almost a year. Last week, I took the fan off of my pc to clean off the dust and put it back.

After that, the screen wouldn't come on. So to test things I did the following:

1. Tested another pc with the screen - Success
2. Tested another Pc with the graphics card : Success
3. Bought a normal VGA cable (blue plug) - Semi Successful

Ok, so I am not sure what has happened to the graphics card. Is it possible that the HD/DVI slot on the card itself could have blown due to static? The Normal VGA slot on the graphics card works fine. I am using an older box screen with this pc as we speak. But for some reason when I plug in the LCD screen (Samsung Syncmaster 23000) nothing happens. Yet when I plug the Box screen into the VGA slot, the box screen works fine and boots up as normal. But the flatscreen refuses to.

I have checked the drivers in device manager, and it says that it's working fine.

Also, in control panel, it sees the samsung 7300 Gs, but refuses to save the settings for a preview.

Any help would be appreciated.


My System SpecsSystem Spec
.
18 Sep 2011   #2
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

I used to have a 7300 gt are you trying it through the super video or vga through hdmi if so try the other way around with the super av and see where that gets you
My System SpecsSystem Spec
Reply

 LCD screen won't work with HD cable on Nvidia 7300GS




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Nvidia GTX HDMI to Samsung TV, check signal cable
Hello I just bought a new computer with a geforce 570 GTX with a mini hdmi output. This i wanted to connect to my samsung TV. First off, my PC only recognises a second monitor when my TV is connected at boot. When i try to select HDMI source on the TV it's greyed out and i can't select it,...
Hardware & Devices
NVIDIA nForce 10/100/1000 Mbps Ethernet card not detecting cable
Hi Had this problem for a few years, but hasn't really bugged me until lately when I need it!! I have a Dell Studio XPS M1330 Laptop, has NVIDIA motherboard. I think ever since I purchased the PC this problem has occurred. Problem: NVIDIA nForce 10/100/1000 Mbps Ethernet card will only...
Hardware & Devices
Will this cable work to extend coaxial cable for cable box?
Getting a new TV and placing it in a different spot than where the old TV is and I realized the coaxial cable coming from the wall isn't going to reach the new location for cable box's "Cable IN" connection. Can I use this as an extension? It looks right to me but I just want to be sure.
Chillout Room
How do I get my Viewcon MIDI to USB cable to work?
Like a lot of people I bought a cheap generic brand MIDI interface on Amazon so I could connect my Yamaha PSR-275 Keyboard to my Windows 7 64bit Laptop. I tried many things including downloading xmidi, rimio, and Yamaha drivers, but bone worked. With the romio driver output on my pc works on my...
Drivers
Can I use a Y-splitter printer cable? Do they work?
I was looking at this cable and I know it doesn't work because the red connector only carries power and no data. Is there a Y-splitter printer cable that will work? I don't want to buy a print router because my workload does not require one and if a y-splitter doesn't work will this hub work?
Hardware & Devices
nVidia nForce Network Controller Cable Unplugged
Hello all, first time poster here. I'll get right to the problem. I'm trying to connect my computer to the internet through Ethernet (ATT DSL) but having a bit of a problem. When I try to install the software for the router, it says that it can't find the device (Router). Ok, now it's...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App