Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Failed install C++2010 installing any CCC driver

13 Oct 2011   #1
cammey

Windows 7 Home Premium 32bit
 
 
Failed install C++2010 installing any CCC driver

I just got a AMD 66701GB to replace my old 9600gt512mb that the fan was going out of.The problem is that when I go to install the CCC install package I get a "failed to install driver package".In the View results it say's that C++2010 failed,sometimes 2010 will succeed and C++2005 will fail.I patched the C++2005 with the KB961894 patch that the XFX tech sent me in a troubleeshooting guide.Still I was geting the 2010 fail so I uninstalled C++2010sp1 and reinstalled it,then installed the CCC package and still the 2010 fail.I make sure to use driversweeper to remove anything left by the old driver.All my games CTD sometime's at start up or sometimes two hours in to the game.XFX tech responded to my issue saying that I need a "400W or higher power supply that has a six pin power connection"which is ok my psu is 430W and has one but the card it self doe's not require one,their no place to plug one in to.If I put my old gfx card in everything runs fine.Now its been a week and still no reply from XFX.Is the C++2010 causing my CTD's and how can I fix the C++ issue.Thx to anyone who helps.

AMD AthlonIIX4 630@2.8GHz
Asus M4A785-M MoBO
3gig memory
500GB HDD
TR2-430W PSU
AMD 66701gb
Win7


My System SpecsSystem Spec
.

14 Oct 2011   #2
Corazon

Windows 7 Professional SP1 32-bit
 
 

Quote   Quote: Originally Posted by cammey View Post
XFX tech responded to my issue saying that I need a "400W or higher power supply that has a six pin power connection"which is ok my psu is 430W and has one but the card it self doe's not require one,their no place to plug one in to.
That 400W PSU is just a minimum recommendation they give, and it doesn't really account for the other hardware components you use. With your 430W PSU you're already close to that limit, and if it isn't a brand-name PSU it probably isn't sufficient (cheap/no-name PSUs usually won't sustain the power output they're rated for).

Are you sure the videocard doesn't have a place for a 6-pin connector? Why would XFX advise you to get a PSU with one if you didn't need it? Better look again just to be absolutely sure...I do think that ATI card would benefit from extra power.
My System SpecsSystem Spec
14 Oct 2011   #3
cammey

Windows 7 Home Premium 32bit
 
 

Their is no place for a six pin on the card,nether the ddr3 or the ddr5 versions of the XFX6670 that their was to choose from require one.My PSU is a thermaltake tr2-430W it has two 12V rails with 14A on one and 15 on the other for a total of 29amps,it has one six pin plug.I know its not the best psu in the world but it meets the cards requirements,I have no idea why they would tell me that.The card works fine in a friends computer and his 550ti works great in mine.At first because I am new to AMD gfx cards I had a issue with windows not loading with the 6670 then I found out that suound view was on auto,disableing that fixed windows loading.Also I turned off AMD HDAudo I herd it can cause issues.For some reason FalloutNV has had no issues but all my other games still CTD.I realy do like the gfx card just wish it would work rite.
Here is the card: http://www.tigerdirect.com/applicati...622&CatId=7005 Just a cheap budget card
My PSU:http://thermaltakeusa.com/Product.as...2&ID=1541#Tab0
My System SpecsSystem Spec
.


15 Oct 2011   #4
cammey

Windows 7 Home Premium 32bit
 
 

Fixed the issue by removeing the 6670 and putting a EVGA 550ti in its place ($40 more).I seen that the 6670 had a 800mhz core clock,that with 480 shaders and one gig of memory even thoe its ddr3 all for under a hundred buck's but I still had higher expectations.So...thx I guess for all the help....I guess.
My System SpecsSystem Spec
Reply

 Failed install C++2010 installing any CCC driver




Thread Tools





Similar help and support threads
Thread Forum
Failed install of driver for HP C4380 Windows 7
I have a HP printer C4380 which is fine on Windows XP. Need to install driver for Windows 7 and have tried 6 times using HP updated driver for Win7. Downloaded driver successfully in 45 minutes each time. During installation come up against same error each time. Cannot find specified file:...
Drivers
Monitor driver - install failed
-- Note: -- This issue is still NOT resolved, please help if you can. I summed up everything in this first post (that happened meanwhile) so you can quickly catch up with the thread! Hi, We have a new monitor but I'm unable to use it's native resolution. We're using it with a notebook...
Graphic Cards
Broadcom Bluetooth driver install failed
Talking about the Broadcom Bluetooth installer at Broadcom.com - Home. Everything works fine until the Instalshield process. Fails, saying "Device not plugged in" for Bluetooth Peripheral Device and Multimedia Audio Controller. Bluetooth Radios and Human Interface Devices are OK. Do you think my...
Hardware & Devices
USB 3.0 External HDD Failed Window 7 Driver Install on USB 3.0 Port
Just got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and...
Drivers
Error 1935 failed to install Office 2010
Please help I have tried several times to Install Office 2010 and keep getting error 1935 half way through. I did remove the trail MS Office 2007 but not sure what else I should remove, I list all MS files I have : MS NET Framework 4 Client Profile MS Office Live Add-in 1.5 MS Office suite...
Installation & Setup
Windows 7 failed to install - Missing driver
I have just recently built a new computer due to my old laptop freezing now and then while using Windows 7. After putting together the build I first loaded Windows XP and then shortly there after installed Windows 7 RC1. Trouble was I was getting random BSoDs that related to the memory. So I ran...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App